Logik L37SPDB14 User manual

Brand: Logik

Model: L37SPDB14

Type: User manual

Logik L37SPDB14 is a sound system that allows you to enjoy rich and powerful sound. It comes with a variety of features that make it a great choice for any music lover. With its Bluetooth® capability, you can wirelessly stream music from your smartphone, tablet, or other Bluetooth-enabled devices. The sound system also has an optical input, which allows you to connect it to your TV or other audio devices. Additionally, it has an AUX input, which allows you to connect it to your MP3 player or other audio devices.

Instruction Manual

Sound Stage

L37SPDB14

Contents

Safety Warnings ............................................................................................................................. 3

Unpacking ......................................................................................................................................5

Product Overview .......................................................................................................................... 6

Front View ..................................................................................................................................................................6

Top View ..................................................................................................................................................................... 6

Rear View ................................................................................................................................................................... 6

Remote Control .............................................................................................................................. 7

Remove the Plastic Strip from the Remote Control ....................................................................8

Battery Replacement for the Remote Control .............................................................................8

Remote Control Operation Range ..............................................................................................10

Placing TV or Monitor..................................................................................................................10

Connections .................................................................................................................................11

Using the OPTICAL Connection ....................................................................................................................... 11

Using the AUX Connection................................................................................................................................11

Using the DAB Aerial Connection ...................................................................................................................12

Using the MP3 LINK Connection .....................................................................................................................12

Connecting to the Mains Supply.....................................................................................................................13

General Operation .......................................................................................................................14

Selecting Modes .................................................................................................................................................... 14

Adjusting the Volume..........................................................................................................................................14

Selecting the Equaliser .......................................................................................................................................14

Adjusting the Brightness....................................................................................................................................14

DAB Operation .............................................................................................................................15

Auto scan .................................................................................................................................................................15

Secondary Services ..............................................................................................................................................15

Manual Tuning .......................................................................................................................................................15

Presetting Stations ...............................................................................................................................................16

Recalling a Preset Station...................................................................................................................................16

DRC (Dynamic Range Control) .........................................................................................................................16

System Reset ..........................................................................................................................................................16

DAB Display Modes ..............................................................................................................................................17

FM Operation ...............................................................................................................................19

Bluetooth® Operation .................................................................................................................20

Listen to Music from Bluetooth Device .........................................................................................................21

AUX / MP3 LINK / OPTICAL Operation ........................................................................................21

Maintenance ................................................................................................................................21

Hints and Tips ..............................................................................................................................22

Specications ...............................................................................................................................23

• Read all the instructions carefully before

using the unit and keep them for future

reference.

• Retain the manual. If you pass the unit

onto a third party make sure to include this

manual.

• Check that the voltage marked on the

rating label matches your mains voltage.

Damage

• Please inspect the unit for damage after

unpacking.

• Do not continue to operate the unit if you

are in any doubt about it working normally,

or if it is damaged in any way - switch o,

withdraw the mains plug and consult your

dealer.

Location of Unit

• The unit must be placed on a at stable

surface and should not be subjected to

vibrations.

• Do not place the unit on sloped or unstable

surfaces as the unit may fall o or tip over.

• The mains socket must be located near the

unit and should be easily accessible.

• This unit is designed for indoor use only.

Temperature

• Avoid extreme degrees of temperature,

either hot or cold. Place the unit well away

from heat sources such as radiators or gas/

electric res.

• Avoid exposure to direct sunlight and other

sources of heat.

Naked Flames

• Never place any type of candle or naked

ame on the top of or near the unit.

Ventilation

• To prevent the risk of electric shock or

re hazard due to overheating, ensure

that curtains and other materials do not

obstruct the ventilation vents.

• A minimum distance of 5cm around the

unit should be maintained to allow for

sucient ventilation.

• Do not install or place this unit in a

bookcase, built-in cabinet or in another

conned space. Ensure the unit is well

ventilated.

Safety Warnings

Safety

• Always disconnect the unit from the mains

supply before connecting/ disconnecting

other devices or moving the unit.

• Unplug the unit from the mains socket

during a lightning storm.

Mains Cable

• Make sure the unit or unit stand is not

resting on top of the mains cable, as the

weight of the unit may damage the mains

cable and create a safety hazard.

• If the mains cable is damaged it must be

replaced by the manufacturer, its service

agent, or similarly qualied persons in order

to avoid a hazard.

Interference

• Do not place the unit on or near appliances

which may cause electromagnetic

interference. If you do, it may adversely

aect the working of the unit, and cause a

distorted sound.

Batteries

• Batteries used in the unit are easily

swallowed by young children and this is

dangerous.

• Keep loose batteries away from young

children and make sure that the battery

holder tray is secure in the unit. Seek

medical advice if you believe a cell has been

swallowed.

• Please dispose of batteries correctly by

following the guidance in this manual.

• Do not expose the battery to direct sunlight

or sources of excessive heat.

Supervision

• Children should be supervised to ensure

that they do not play with the unit.

• Never let anyone especially children push

anything into the holes, slots or any other

openings in the case - this could result in a

fatal electric shock.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning ash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the

presence of uninsulated “dangerous

voltage” within the unit’s enclosure that

may be of sucient magnitude to

constitute a risk of electric shock.

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the manual

accompanying the unit.

Service

• To reduce the risk of electric shock, do not

remove screws. The unit does not contain

any user-serviceable parts. Please leave all

maintenance work to qualied personnel.

• Do not open any xed covers as this may

expose dangerous voltages.

Maintenance

• Ensure to unplug the unit from the power

supply before cleaning.

• Do not use any type of abrasive pad or

abrasive cleaning solutions as these may

damage the unit’s surface.

• Do not use liquids to clean the unit.

Unpacking

Remove all items from the packaging. Retain the packaging. If you dispose of it please do so

according to local regulations.

The following items are included:

Thank you for purchasing your new Logik Sound Stage.

We recommend that you spend some time reading this instruction manual in order

that you fully understand all the operational features it oers. You will also nd some

hints and tips to help you resolve any issues.

Read all the safety instructions carefully before use and keep this instruction manual

for future reference.

If items are missing, or damaged please contact Partmaster (UK only).

Tel: 0844 800 3456 for assistance.

Remote Control

3.5mm to RCA Stereo

Audio Cable

Mains Cable

3.5mm to 3.5mm

Audio Cable

Instruction Manual

Main Unit

Aerial

MUTE

SCAN

VOL +

/OK

EQ VOL –

SOURCE

DIMPAIR PROG

MENU INFO

Instruction

Manual

Product Overview

Front View

Top View

Rear View

1. Speakers

2. POWER Indicator

3. Display

1. Button

2. SOURCE Button

3. / PAIR Button

1. AC~ Socket

2. DAB Socket

4. Remote Control Sensor

5. Subwoofer

4. VOL – Button

5. VOL + Button

6. MP3 LINK Socket

3. AUX (L/R) Sockets

4. OPTICAL Socket

21 13 4

SOURCE / PAIR

VOL – VOL +

MP3 LINK

AC~ AUX

DAB

OPTICAL

1 2 3 4 5 6

1 32 4

MUTE

SCAN

VOL +

/OK

EQ VOL –

SOURCE

DIMPAIR PROG

MENU INFO

Remote Control

1. Button

Switch the unit between On and

Standby mode.

2. SCAN Button

Scan for radio stations automatically in

DAB or FM mode.

3. EQ Button

Select the preset equalisers.

4. /OK Button

• Play/pause/resume playback in BT

mode.

• Conrm the selection on a menu

screen.

5. Button

• Skip backwards to the beginning of

the track or to the previous track in

BT mode.

• Search for a radio station in DAB or

FM mode.

• Select an item on a menu screen in

DAB mode.

6. Button

• Skip forwards to the next track in BT

mode.

• Search for a radio station in DAB or

FM mode.

• Select an item on a menu screen in

DAB mode.

7. MENU Button

Display menu screen.

8. PAIR Button

Access Bluetooth function in BT mode.

9. SOURCE Button

Select the input source.

10. MUTE Button

Silence the unit or restore the sound.

11. VOL +/– Buttons

Adjust the volume.

12. Button

Select a preset station in DAB or FM

mode.

13. INFO Button

Display the radio station information.

14. Button

Select a preset station in DAB or FM

mode.

15. PROG Button

Preset radio stations.

16. DIM Button

Adjust the display brightness level.

Battery Replacement for the Remote Control

The remote control requires a CR2025, 3V Lithium

battery.

1. Slide and hold the battery release tab in the

direction of the arrow.

2. Pull out the battery holder and remove the old

battery.

3. Replace with a new battery.

4. Insert the battery holder back into the remote

control.

Remove the Plastic Strip from the Remote

Control

Remove the plastic strip from the battery if the

battery is being used for the rst time. It is located

at the bottom rear of the remote control.

Handling the Battery

• Improper or incorrect use of batteries may cause corrosion or battery leakage,

which could cause re, personal injury or damage to property.

• Install the battery correctly in the battery compartment.

• When the battery is exhausted, the remote control will not function.

• Only use the battery type indicated in this manual.

• Do not dispose of the used battery as domestic waste. Dispose of it in

accordance with local regulations.

• Small button cell batteries such as the one used in the remote control are

easily swallowed by young children and this is dangerous. Keep loose button

cells away from young children and make sure that the battery is secure in

the remote control. Seek medical advice if you believe a battery cell has been

swallowed.

Handling the Remote Control

• Take care of your ngernails when you slide and pull the battery release tab.

• Do not drop the remote control.

• Do not allow anything to impact the remote control.

• Do not spill water or liquid on the remote control.

• Do not place the remote control on a wet object.

• Remove the battery from the remote control when not in use for a long period

of time, as corrosion or battery leakage may occur and result in physical injury,

and/or property damage, and/or re.

Remote Control Operation Range

• The remote control sensor at the front unit is

sensitive to the remote control’s commands up

to a maximum of 6 metres away and within a

maximum of a 40° arc.

• Please note that the operating distance may

vary depending on the brightness of the room.

20° 20°

Max. 6 m

Placing TV or Monitor

The unit supports a TV up to a maximum dimension of 48 cm (W) x 22 cm (D) for its base

and within a maximum load of 30 kg.

Ensure the TV is placed properly. Turning the volume up too loud may

cause the TV to vibrate and fall over.

MUTE

SCAN

VOL +

/OK

EQ VOL –

SOURCE

DIMPAIR PROG

MENU INFO

Maximum dimension of the TV base:

48 cm (W) x 22 cm (D)

AC~ AUX

DAB

OPTICAL

AUX

OPTICAL

AC~ AUX

DAB

OPTICAL

AC~ AUX

OPTICAL

DAB

Connections

Using the OPTICAL Connection

Use an optical cable (not included) to connect the TV’s optical output socket to the unit’s

OPTICAL socket. Before inserting the optical cable, remove the OPTICAL socket cover.

OPTICAL cable

(not included)

3.5mm to RCA Stereo

Audio Cable

Using the AUX Connection

Use the 3.5mm to RCA Stereo Audio Cable to connect the TV’s headphone socket to the

AUX (L/R) Sockets of the unit.

Rear view of the unit

red

white

Alternatively, you can also use an RCA Stereo Audio Cable (not included) to

connect the TV’s audio output sockets to the unit’s AUX (L/R) sockets.

If there is no sound output and the display shows PLEASE CHANGE YOUR

SOURCE DEVICE TO PCM MODE UNDER AUDIO OUTPUT SETTING, ensure the

audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to

PCM mode.

SOURCE / PAIR

VOL – VOL +

MP3 LINK

AC~ AUX

OPTICAL

DAB

Using the MP3 LINK Connection

Use the 3.5mm to 3.5mm audio cable to connect the audio device’s headphone socket to

the unit’s MP3 LINK socket.

Using the DAB Aerial Connection

Connect one end of the aerial (included) to the DAB socket at the rear of the unit. Then

position the aerial to obtain optimum reception.

3.5mm to 3.5mm

audio cable

Top view of the unit

Audio device

Connecting to the Mains Supply

• Ensure that the power supply voltage corresponds to the voltage printed on the back

or the underside of the unit.

• This unit is designed to operate with the provided mains cable.

• Connecting the unit to any other power source may damage the unit. Unwind the

mains cable to its full length.

• Connect the end of the mains cable to the AC ~ Socket at the rear of the unit.

• Connect the mains plug to the mains socket. Make sure the mains plug is rmly

inserted into the mains socket.

• Ensure all audio connections of the unit are connected before connecting to

the mains power socket.

• Unplug the power cord from the outlet when the unit is not in use for an

extended period of time.

To the mains

socket

AC~ AUX

OPTICAL

General Operation

When you rst connect the unit to the mains socket, the unit will be in Standby mode. The

POWER indicator will light up red.

• Press to switch the unit on. The display will show a greeting message HELLO and

then the last used mode.

• Press to switch the unit back to Standby mode. The display will show STANDBY and

then turn o. The POWER indicator will light up red.

• Disconnect the mains plug from the mains socket if you want to switch the unit o

completely.

The eco-friendly technology will switch this device to Standby mode

automatically when the input device volume is too low or muted for 15 minutes.

The device can be reactivated by pressing Standby button and turning up the

input device volume. Except for Optical mode, the eco-friendly control will switch

the device to standby mode automatically when there is no input signal for 15

minutes.

Selecting Modes

Press SOURCE repeatedly to switch between DAB, FM, AUX, BT, MP3 LINK and OPTICAL

mode.

Adjusting the Volume

• Press VOL +/– to adjust the volume.

• If you wish to turn the sound o, press MUTE on the remote control. Press MUTE again

or press VOL +/- to resume normal listening.

Selecting the Equaliser

Press EQ on the remote control repeatedly to select a desired music mode (DEFAULT,

MOVIE, MUSIC, TV).

• When AUX or OPTICAL mode is selected, the equaliser will be set to MOVIE.

• When DAB, FM, BT or MP3 LINK mode is selected, the equaliser will be set to MUSIC.

Adjusting the Brightness

Press DIM on the remote control repeatedly to select brightness level.

DAB Operation

Auto scan

The auto scan will search for the entire DAB Band III channels. When DAB mode is selected,

the unit will start an auto scan. You may also follow the steps below to run a auto scan

manually:

1. While in DAB mode, press the / PAIR Button on the unit or the SCAN Button on the

remote control to perform a full scan.

Press MENU on the remote control to enter the DAB Menu. Press / to select

“FULL SCAN”, and then press /OK on the remote control to conrm.

2. The display will show “Scan …”. This may take a few minutes, depending on the number

of stations found.

After the scan has nished, the rst alphanumerically found station will be selected and

all the stations that have been found will be stored automatically. To explore the found

stations, press / and then /OK on the remote control to conrm.

Running a full scan will clear all the DAB stations previously found.

Secondary Services

You may see a “>” symbol after the name of the primary station whilst exploring the found

stations by pressing / . This indicates that there are secondary services available to

that station. These secondary services contain extra services that are related to the primary

station. e.g. a sports station may want to add extra commentaries. The secondary services

are inserted directly after the primary station in the station list.

To select the secondary station, press / until you nd the secondary service and

press /OK on the remote control to conrm. When the secondary service ends, the unit

will automatically switch back to the primary station.

Manual Tuning

You can also manually tune the receiver. This can help when aligning your aerial or when

adding stations that were missed while auto tuning.

1. Press MENU and then / on the remote control to select “MANUAL”. Press /OK

on the remote control to conrm.

2. Press / on the remote control to scroll through the DAB channel frequency.

3. After your desired channel frequency is selected, press /OK on the remote control to

conrm. The display will now show the frequency signal strength bar.

4. If a signal is detected, the station will be saved in the station list.

Presetting Stations

You can store up to 20 of your favourite DAB stations to the memory. This will enable you to

access your favourite stations quickly and easily.

1. To store a preset, you must rst be listening to the station that you would like to save,

press the PROG Button on the remote control. The display will show “## EMPTY“, and

the preset number will ash.

2. Press the / Button on the remote control to select your desired station preset

number.

3. Press the PROG Button to conrm your station, the display will show “STORED“.

Recalling a Preset Station

Once you have saved a station, you can recall it by pressing the / Button on the remote

control to select your desired preset number. Press the /OK Button to conrm.

• After storing the preset stations, they will be saved into the memory and

power o will not erase them. Running a full scan will not replace the preset

stations in the memory.

• Storing a new station in a preset location will erase the previously stored

station in that location.

DRC (Dynamic Range Control)

Dynamic Range Control is an advanced technology that reduces the dierence in volume

between stations when switching stations.

4. In DAB mode, press the MENU Button on the remote control and then the /

Button to select “DRC”. Press the /OK Button to conrm.

5. Press the Button to select DRC HIGH, LOW or OFF. Press the /OK Button to

conrm the setting.

System Reset

There may be times when you need to reset your unit back to the factory settings especially

when you have moved house. If you experience reception problems you may want to reset

and try again. If you move to another part of the country and pick up the local and national

DAB stations in that area, your previously tuned channels may no longer be available.

1. In DAB mode, press the MENU Button on the remote control and then the /

Button to select “SYSTEM”. Press the /OK Button to conrm.

2. Press / on the remote control to select “RESET”. Press /OK on the remote

control to conrm. The display will show “RESET N”. Press / on the remote

control to select “RESET Y”. Press /OK on the remote control to conrm. The display

will show RESTART and then WELCOME. The unit will perform a full scan and the

display will show “Scan …”.

DAB Display Modes

Every time you press the INFO button, the bottom line of the

display will cycle through the following display modes.

DLS (Dynamic Label Segment)

Dynamic label segment is a scrolling message that the

broadcaster may include with their transmissions. The

message usually includes information, such as programme

details etc.

Signal Strength

The display will show a slide bar to indicate the signal

strength, the stronger the signal, the longer the bar will be

from left to right.

Programme Type

This describes the “STYLE” or “GENRE” of music that is being

broadcast e.g. “ROCK” or “CLASSICAL”.

Ensemble Name

An Ensemble/multiplex is a collection of radio stations that

are bundled and transmitted on one frequency. There are

national and local multiplexes. Local ones contain stations

that are specic to that area.

DAB – unlike normal radio, groups together

several radio stations and transmits them on

one frequency.

Channel Number

DAB digital radio can be broadcast on a wide number of

frequencies. A number of channels have been allocated

(5A-13F). Refer to the table in p.18-19 for details.

Frequency

The frequency of the present station will be displayed.

Error in Signal

A number showing the error rate. If the number is 0, it means

the signal received is error free and the signal strength is

strong. If the error rate is high, it is recommended to reorient

the radio aerial or reposition the unit.

Bitrate

The display will show the digital audio bit rate being received.

Mode

The display will show DAB or FM mode.

Date and Clock

The broadcaster (Radio station) provides clock and date

information automatically so there’s no need to manually set

this information. If the information is not available, the display

will show “NO CLOCK“ and “NO DATE“.

Ensemble Name

Channel Number

Frequency

Error in signal

Signal Strength

DLS

Programme Type

Bitrate

Clock

Mode

Date

DAB channels

Channel number Channel Frequency

5A 174.928 MHz

5B 176.640 MHz

5C 178.352 MHz

5D 180.064 MHz

6A 181.936 MHz

6B 183.648 MHz

6C 185.360 MHz

6D 187.072 MHz

7A 188.928 MHz

7B 190.640 MHz

7C 192.352 MHz

7D 194.064 MHz

8A 195.936 MHz

8B 197.648 MHz

8C 199.360 MHz

8D 201.072 MHz

9A 202.928 MHz

9B 204.640 MHz

9C 206.352 MHz

9D 208.064 MHz

10A 209.936 MHz

10B 211.648 MHz

10C 213.360 MHz

10D 215.072 MHz

11A 216.928 MHz

11B 218.640 MHz

11C 220.352 MHz

11D 222.064 MHz

12A 223.936 MHz

12B 225.648 MHz

12C 227.360 MHz

12D 229.072 MHz

13A 230.784 MHz

13B 232.496 MHz

FM Operation

Auto Scan and Save Preset Station

1. Press the SOURCE Button repeatedly on the unit or on the remote control to select FM

mode.

2. Press the SCAN Button on the remote control to activate automatic programming. All

available stations are programmed in the order of waveband reception strength.

• The rst programed radio station is played automatically.

Tune to a Preset Radio Station

• Press the / Button to select a preset number that you want. Press the /OK Button

to conrm.

Tuning in a Station

Tune in radio stations automatically

• Press the / PAIR Button on the unit or press and hold the / Button, the

frequency changes down or up automatically until a station is found.

The search may not stop at a station with a very weak signal.

Tune in radio stations manually

• Press the / Button repeatedly until you nd the station you want.

Presetting Stations Manually

You can preset up to 20 FM stations.

1. Tune in the desired station, then press the PROG Button.

2. Press the / Button to select the preset number.

3. Press the PROG Button to store the station.

4. Repeat above steps 1 to 3 for each station you want to store in memory with a preset

number.

• If reception is still poor, try to adjust the position of the aerial or try to move

the unit to another location while the unit is in FM or DAB mode.

• The unit will automatically synchronise with the clock of the radio station every

hour. After synchronisation, press the

Button on the unit or remote control

and a time clock will show on the display. If the unit is idle for a further 90

seconds, the unit will enter Standby mode.

13C 234.208 MHz

13D 235.776 MHz

13E 237.488 MHz

13F 239.200 MHz

Bluetooth® Operation

You can listen to tracks from a media device if it is connected to the unit via Bluetooth.

• The operational range between the main unit and a Bluetooth device is

approximately 8 meters.

• Before you connect a Bluetooth device to this unit, familiarize yourself with the

Bluetooth capabilities of the device.

• Compatibility with all Bluetooth devices is not guaranteed.

• Any obstacle between this unit and a Bluetooth device can reduce the

operational range.

• Keep this unit away from other electronic devices that may cause interference.

To connect your device to the unit via Bluetooth, follow the steps below:

1. Switch the unit on. Press the SOURCE Button on the remote control repeatedly to

select BT mode. The display will show BT and then BT READY.

2. Press and hold the /PAIR Button on the unit or the PAIR Button on the remote

control to activate Bluetooth pairing.

3. The display will show “DISCONNECT” twice and then “BT READY“ when searching for

Bluetooth devices.

4. Activate your Bluetooth device and select the search mode.

5. “L37SPDB14” will appear on your Bluetooth device list.

6. Select “L37SPDB14” and enter “0000” for the password if necessary.

7. The display will show “PAIRED” when connection is successful.

8. To disconnect the Bluetooth function, switch to another function on the unit or disable

the function from your Bluetooth device.

• If the signal strength is weak, your Bluetooth receiver may disconnect, but it

will re-enter pairing mode automatically.

• For better signal reception, remove any obstacles between the unit and the

Bluetooth device.

• This unit supports A2DP (Advanced Audio Distribution Prole) and AVRCP

(Audio Video remote Control Prole) functions. This can only be paired with one

Bluetooth device at one time.

• Compatibility with all devices and media types is not guaranteed.

• Some mobile phones with the Bluetooth function may connect and disconnect

as you make and end calls. This is not an indication of a problem with your unit.

Page is loading ...

Logik L37SPDB14 User manual

Logik L37SPDB14 User manual

Logik L37SPDB14 User manual

Related papers

Other documents