JP-JKWIP
Whip mounting bracket
Application: Jeep JK 2007-2018 (Excluding JL model)
Instructions:
1. Start by removing the spare tire. This will allow access to the
area needed for the installation of this bracket.
2. Remove two bolts located on the top passenger side of the
carrier, that attach the spare wheel carrier to the vehicle.
3. Align the holes of the whip bracket to the holes on the
spare wheel carrier. Reinstall the two previously removed
bolts, securing the whip bracket and spare wheel carrier
to the vehicle .
4. Install whip (not included) to the bracket in accordance
with the whip's instructions.
5. After completing and testing the whip, reinstall the spare tire.
386-257-2956
www.metraonline.com
460 Walker Street, Holly Hill, FL 32117
05/06/21
-
1
