Cavalry CAND3001T0 User manual

Brand: Cavalry

Model: CAND3001T0

Category: NAS & storage servers

Type: User manual

This manual is also suitable for

User's Manual

CAND Series

Preface

Please respect copyrighted content. Duplication or modification of this publication in whole or in

part is prohibited without express or written authorization.

Usage

Strong impacts or dropping the product may cause damage. Only allow qualified personnel to

repair this product. Disassembling or opening this product will void your warranty.

Disclaimer

Cavalry is not liable for compensation for data loss which may result from a malfunction of the

product or from changes due to improper use, repairs, defects, or battery change. Please back

up your data to avoid unexpected losses. Cavalry reserves the right to make changes to the

content of this manual without notice. The most current manuals and software are available for

download at our download page: www.cavalrystorage.com/su_download.htm

2 2

Thank you for choosing Cavalry.

We at Cavalry extend our sincere gratitude for your purchase of this product.

We hope our dedication to delivering high quality products with excellent

customer service will ensure your continued interest in our products.

This manual will assist in the operation of the product. To optimize your

experience with this product, we recommend reading this entire manual

before usage. Please keep this manual for future reference.

3 3

Table of Contents

Preface .................................................................................................... 2

List of Accessories ............................................................................. 5

Product Illustrations ........................................................................... 6

Features ............................................................................................. 8

Setup Instructions .............................................................................. 9

Basic NAS Setup ............................................................................... 11

Troubleshooting ................................................................................. 15

Warranty ............................................................................................ 18

Contact .............................................................................................. 19

List of Accessories

1. External power adapter / power cord (may vary with product)

2. Resources CD

3. Ethernet cable

Front

1. LED status indicators

Back

2. Ventilation fan

3. 10/100/1000 Ethernet port

4. USB 2.0 port (for printer)

5. Power jack

6. Power switch

Features

Network Attached Storage (NAS)

Supports 10/100/1000 Mbps LAN Speed

Supports USB printers and can host other devices

SATA and IDE support

Supports RAID levels 0 and 1, as well as Spanning and JBOD

Supports FTP / SMB server

Supports UPnP Protocol

Supports EXT2, EXT3 and FAT32 (JBOD only) formatting

Exceptional heat dissipating ability

Nearly silent operation

PC, Mac and Linux compatible

Setup Instructions

Follow the steps below to successfully set up your Cavalry Network Attached

Storage (NAS) with your computer.

Step 1. For optimal security and convenience, we recommend designating a

single computer to handle all NAS configuration settings.

Step 2. Start your computer and wait for Windows/Mac OS/Linux to load

completely.

Step 3. Connect the power adapter to the drive. Then plug the power

adapter into an electrical outlet. Turn on the power switch; the "Power" LED

will light up to indicate proper operation.

1110

Step 4. Insert the Ethernet cable to the LAN port on the back of the CAND

and the other end to an Ethernet port on the network adapter of a router /

switch / hub. The "Link" LED will illuminate to indicate proper connection.

Step 5. It will take about 2 minutes to boot up the unit. During this time, the

"Link" LED will be blinking. Once the unit is booted up, you may proceed to

"Basic NAS Setup" on the next page.

NOTE: To shut down the unit, make sure all current downloads and transfers

are stopped before turning off the power switch. The unit will shut down after

1 minute. If the system will be off for an extended period of time, remember

to also remove the power adapter from the electrical outlet.

NOTE: To create a printer server, simply connect the printer via USB directly

to the NAS. The CAND can also host other devices.

1110

Basic NAS Setup

Step 1. Insert the Resources CD and open the "SetupUtil" file under the

folder: "Contents/CAND/"

Step 2. Once the Setup Wizard appears, click on Setup.

Step 3. NAS will automatically show up in the device list. Select “nas” and

click OK to change the IP setting.

Step 4. Enter the admin password before accessing the device. The default

Step 5. Choose a name and set up the IP configuration. We recommend

using the “Automatically obtain an IP address (DHCP)”. Click Next.

12 13

Step 6. Follow the instructions and continue with setup of date and time.

Save your settings.

Step 7. Enter Setup again and double-click on "nas". Your default web

browser will open the Web Configuration page.

Step 8. Go to "Maintainance" >> "Disk Utility" to set up the hard drives.

Step 9. Go to "Maintainance" >> "RAID Settings" to choose which RAID

setting you want. Click on “Create raid system” to start building RAID level

and formatting. Do not perform other functions while formatting.

NOTE: RAID 0 provides no data protection and faster speeds, RAID1

provides data protection but with half the capacity of the total drive, and

JBOD makes the computer detect the 2 hard drives in the unit as separate.

12 13

Step 10. Once formatting has completed, you can access more options:

Basic, Control Panel, and Personal Info.

Step 11. Click on "Basic" to change basic settings for your device.

Wizard

Used to change Language, Password, Hostname, IP setting, and

Time & Date.

Add User

You can add users, user passwords, and quota limits. If there are

other users already set up, they can be added to the user account

management. In the last step, you can configure the permissions to

the shared folder and add or remove other users.

1514

Add Group

Enter the group name. Configure which members will be included in

this group by adding and removing the members from the list.

Configure the share permissions by adding (read only or writable)

and removing the shares from the list.

Add Folder

Enter the share folder name and an optional descrption. Configure

the Winsows/FTP access permissions by adding (read-only and

writable) and removing the members or group from the list.

Configure the NFS access permissions by adding a unique IP

addresses or a subnet.

For more detailed instructions of how to set up your NAS, please refer to the

"NAS User's Manual", available in the "Contents/CAND" folder of the

Resources CD or online at www.cavalrystorage.com/manuals.htm

1514

Troubleshooting

LED light indicator does not turn on

Make sure the power adapter is securely connected to a working electrical

outlet. Secondly, make sure the Ethernet cable is inserted correctly into the

hard drive and the router. Turn on the power switch (page 7).

Computer does not detect hard drive

Be sure to wait at least 2 minutes for the unit to boot up. Make sure the

Ethernet cable between the device and the router / swtich / hub is securely

connected. It could take a few minutes before the setup utility will detect the

hard drive.

16 17

Loud noises coming from external hard drive

In most cases, loud noises coming from the drive suggest a defective drive or

a loose part. We apologize for any inconvenience this may cause. Please

contact customer service for assistance.

One of the hard drives appeared to have failed

This indicates one of the drives may need replacing. The hard drive must be

replaced by another hard drive of the same capacity, brand, and model

number. Open the enclosure, remove the failed hard drive and replace with

the new drive. Close the unit. The new drive should rebuild automatically.

16 17

If you have more questions, please refer to the Frequently Asked

Questions section online at: www.cavalrystorage.com/su_faq.htm. For

further inquiries, you may contact Bason/Cavalry tech support at

[email protected].

18 19

Warranty

This product comes with a one year warranty from the date of purchase.

Please register your product at www.cavalrystorage.com/prodreg.htm to

activate the warranty. Please have your Serial Number and Model Number

ready. We are not responsible for any loss of data. Please back up your data

often to avoid unexpected losses.

18 19

Contact

Cavalry Storage, Inc.

555 E. Easy St.

Simi Valley, CA 93065

Email:

[email protected]

Website:

www.cavalrystorage.com

CA1093

061008

Cavalry CAND3001T0 User manual

Brand: Cavalry

Model: CAND3001T0

Category: NAS & storage servers

Type: User manual

This manual is also suitable for

Download PDF

report

Cavalry CAND3001T0 User manual

This manual is also suitable for

Cavalry CAND3001T0 User manual

Related papers

Other documents