CB60 Total No-Frost PRODUCT SHEET
GB
I
RO
PL SK H RUS BG
GB
CZ
A. Refrigerator Compartment
1. Height adjustable grid or glass shelf
(depending on model)
2. “COOL” compartment and separators
(depending on model)
3. Crispers
4. Door trays
5. Removable bottle restraint
6. Bottle rack
7. Rating plate (at the side of the crispers)
B. Freezer Compartment
8. Rack for ice cube trays and/or ice packs
(depending on model)
9. Compartment for storing frozen/deep
frozen foods
10. Area for freezing
11. Freezer door
C) Removable plinth
D) Light switch off button
E) Internal controls
Notes: the number of shelves and type of accessories may vary, depending on the model.
All shelves, door trays and racks are removable.
Important: refrigerator accessories must not be washed in a dishwasher.
The seals fitted to the doors of the fridge and the freezer can be removed from their channels for cleaning.
To reseat the seal, take care to press the rigid base fully into the door channel.
6gb33105.fm Page 1 Friday, April 16, 2004 3:33 PM
5019 637 33105
CB60 Total No-Frost
GB
I
RO
PL SK H RUS BG
GB
CZ
INTERNAL CONTROLS
1. Freezer compartment temperature control
knob
2. Refrigerator compartment temperature
control and switch off knob
3. Fast freeze indicator (yellow)
4. “COOL” compartment drawer air flow
control (depending on model)
5. Air vents.
Refrigerator compartment internal temperature control
Turn the thermostat control knob
(2)
.
- Towards position
Min
if the temperature within the compartment is too cold.
- Towards position
Max
for colder temperatures.
- To position
OFF
to switch off the appliance.
Freezer compartment internal temperature control
Turn the thermostat control knob
(1)
.
- Towards position
Min
for less cold internal temperatures.
- Towards position
Max
for colder temperatures.
- To position to use the fast freeze function.
Recommended thermostat setting: MED position.
Note:
The ambient air temperature, the frequency of opening the door and the position of the appliance can affect the
internal temperatures of the refrigerator. These factors must be taken into account when setting the thermostat.
Important
The fan will run ONLY when the compressor is in operation. Do not obstruct the air vents (5).
Replacing bulbs:
This product uses a special bulb; to replace do not unscrew. Pull towards the inside of the appliance.
6gb33105.fm Page 2 Friday, April 16, 2004 3:33 PM
/