Bazooka Power Rail Universal Roll Bar Owner's manual



Installation Instructions

PR-URM

Contact: www.southernaudioservices.com www.bazooka.com www.atvpowerrail.com [email protected] 1-800-843-8823 or 225-272-7135

To use the center mounting

configration, place the supplied

6mm hex head bolt in the counter

sunk hex shaped hole. Use supplied

locking nuts and washers to mount

your accessories.

To use the offset mounting configuration.

Screw the supplied 6mm studs into the

floating mounting nuts. Make sure stud

is screwed all the way in. Use supplied

locking nuts and washers to mount your

accessories.