Page is loading ...
Nilfisk UHB 51-1500
Nilfisk
Battery Burnisher
A new design with more features
Technical specifications
Description Unit UHB 51-1500
Rated power W 1500
Protection class/ IP Protection IPX4
Voltage V 36
Sound pressure level at 1,5 m dB(A) 68
Polishing rate m
2
/h 2230
Pad diameter mm 510
Pad pressure g/cm
2
AUTOMATIC
Pad speed rpm 1500
Length x width x height cm 136x56x106
Weight kg 88
Operating weight kg 210
The new Nilfisk UHB 51-1500 represents the very latest and most
technically advanced means of restoring and maintaining a high
gloss shine on floors.
The many improved features include easier-than-ever operation,
added safety considerations, passive dust control and better
ergonomics. The biggest difference, however, between the
UHB 51-1500 and its competitors is performance. For medium/large
hard floors, nothing compares to this outstanding and truly well
designed burnisher.
With typical Nilfisk attention to detail, the UHB 51-1500 has the
right handling, accurate pad pressure, and superb dust control to
produce a professional finish with value-adding productivity gains.
• Self-regulating pad pressure eliminates the need for adjustments
& reduces operator errors.
• Simple controls and low prole design make operating the unit
easier and safer.
• The burnishing deck automatically lifts when the motor is turned
off for better floor protection.
• Excellent active dust control with HEPA ltration optional for dust
sensitive areas
• On-board battery charger saves downtime and adds convenience
Optional vacuum
available for active
dust control
Two port dust bag is easy
to access for bag changes
96025620-06/08
Specications and details are subject to change without prior notice.
Nilfisk-Advance Limited,
Unit 24, Hillside Business Park
Kempson Way
Bury St. Edmunds,
Suffolk IP32 7EA
Tel. (01284) 763163
Fax (01284) 750562
www.nilfisk.co.uk
Your local distributor is:
/
