Page is loading ...
Before using your new Steren´s product, please read this instruction manual to prevent
any damage.
CAUTION
HIGHLIGHTS
BATTERY INSTALLATION
CONTROLS
INSTALLING THE DOOR BELL
HOW TO USE
TONES
SPECIFICATIONS
IMPORTANT
• Install it in a dry place.
• Clean with a soft, dry cloth.
• Do not try to open the device, may cause damages and warranty
will be void.
• Do not expose to extreme temperatures.
The 24 tones wireless doorbell is very easy to install, totally wireless and it uses only three AA
batteries. It has a switch to select the tone.
• Transmitter is push type and it is powered by a 12 V battery.
• Maximum range is 50 m in areas with obstacles, and 100 metres in open areas.
• 24 tones.
• Easy to install.
• Cables are not required.
Receiver
1. Remove the cover from the battery compartment.
2. Place three AA batteries (not included), paying attention to polarity.
3. Replace the cover.
Doorbell
1. Remove the cover from the battery
compartment, using a screwdriver, as shown.
2. Place one 23 A type battery, paying attention to polarity.
3. Replace the cover.
1. Place the receiver in a at surface or hang it up using the right hole.
2. To install the doorbell, clean the surface where you want to install it (wall or door).
3. Remove one of the protectors of the sticker
and stick it on the wall or door.
• Press it slightly.
4. Then, remove the second protector from the sponge.
5. Place the doorbell over the sponge and press slightly.
After installing the device, press the Ring button, then
you will hear a tone in the receiver.
To change the tone:
1. Press Melody button to select a tone.
2. After selection, drop the button.
1. Ring button
Press to activate a tone in the receiver
2. Battery compartment
Use it to install a 23 A battery
1. Speaker
Allows you to hear a door bell sound.
2. Melody
Use it to select a tone.
3. Battery compartment
Use it to install three AA batteries.
Doorbell
Input: 4.5 V - - - (3 x AA)
Transmitter
Input: 12 V - - - (1 x 23 A)
The instructions of this manual are for reference about the product.
There may be differences due to updates.
Please check our web site (www.steren.com) to obtain the latest version of the
instruction manual.
Product design and specications are subject to change without notice.
DOOR BELL
RECEIVER
Product: 24 tones wireless doorbell
Part number: TIM-260
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
01 800 500 9000
TIM-260
Instruction Manual
24 tones wireless
doorbell
V0.0
0813a
1
2
1
2
3
-
1
-
2
