Page is loading ...
MARINATOR WARMER
Model MDMW-10
PRODUCT FEATURES
• Thermostatically controlled to maintain precise temperature.
• "POWER ON" indicator light and "HEATER ON" indicator light.
• Convenience outlet and mounting bracket for product timer. Timer
bracket can be mounted on the side or rear of the marinator.
• Low water sensor and alarm buzzer.
• Three 6" deep stainless steel pans and lids are standard. 6" deep
microwave approved plastic pans and lids are optional.
• Available with pin-and-sleeve electrical connection for overhead power
supplies or twist lock plugs.
DIMENSIONS
INSTALLED SHIPPING
DIMENSIONS DIMENSIONS
MODEL
W D H H*
WEIGHT
W D H
WEIGHT
MDMW-10
23
1/6"
17
3/8"
9
1/2"
18" 35 28" 22" 14" 46
*Including timer bracket
ELECTRICAL INFORMATION
Voltage: 120V single phase.
Power: 1.5 KW, 12.5 amps, plus convenience outlet.
Power Supply Cord: 6' in length with either L5-20P twist lock
plug or Hubbel 320 P4W pin-and-sleeve.
PRODUCT FINISH
All stainless steel construction.
PRODUCT WARRANTY
The Marinator Warmers manufactured by Wells are warranted to be free
from defects in materials and workmanship for a period of one year from the
date of original installation and is for the benefit of the original purchaser
only. This warranty does not apply to damage resulting from fire, water,
burglary, accident, abuse, misuse, acts of God, faulty installation including
improper electrical supply.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, THERE BEING NO OTHER WARRANTIES,
EXPRESSED OR IMPLIED IN LAW OR IN FACT, INCLUD-
ING BUT NOT LIMITED TO, WARRANTIES OF MERCHANT-
ABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE,
AND/OR FOR DIRECT, INDIRECT, OR INCONSEQUENTIAL
DAMAGES IN CONNECTION WITH WELLS' PRODUCTS,
Wells' obligation under this warranty is limited to the repair of defects or
replacement without charge by a WELLS factory authorized service agency
or one of its sub-service agencies. This service will be provided on
customer's premises.
WEIGHT (LB.)
UNIT SHIPPING
35 46
ELECTRICAL SPECIFICATIONS
WATTS VOLTS NOM. AMPS
AMPS
CIRCUIT
BREAKER
1500 120 12.5 20.0
Wells Manufacturing Company
2 Erik Circle, P.O. Box 280 • Verdi, NV 89439
(702) 345-0444 • FAX: 702-345-0569
TOLL-FREE FAX: 800-356-5142, for orders only
Date 8/03/00 WELLS MANUFACTURING COMPANY PAGE 1 RKPSTD04
PARTS LIST: SP250 SERV PART MDMW-10
ILLUS. # PART NO. DESCRIPTION
ELEMENTS:
66603 ELEM 120V 1500W MDMW-10
CONTROLS (THERMOSTATS & INFINITE SWITCHES):
60892 THERMO CTRL MDMW-1
66604 CONTROL LOW WATER MDMW-10
67022 INSULATION,THERMO BULB MDMW
67444 CONTROL WATER 208/240V WARMERS
HARDWARE FOR ELEMENTS AND THERMOSTATS:
50397 CLIP ELEM WARMERS SMALL 6PCS
60587 CALIBRATION PLATE MDMW
65741 PAN ELEM LLW-1220, BMW-206
65812 BRKT THERMO BULB SS206 TYPE
KNOBS:
60588 KNOB THERMOSTAT-MDMW
SWITCHES (ROCKER & TOGGLE):
50330 TOGGLE SWITCH
53192 ON-OFF PLATE
MISC. ELECTRICAL:
51157 LIGHT SIGNAL RED 240V
60563 LIGHT SIGNAL WHITE 120V
60590 CONVENIENCE OUTLET 120V
62558 STRAIN RELIEF MDMW-3
65985 BUZZER BRKT ASSY MDWM-LWC
66514 PROBE LOW WATER PC-1M
MISC. MECHANICAL:
65940 STOP THERMOSTAT MDMW-LWC
66609 SLEEVING GLASS 36IN MDMW-10
66677 INSULATION KIT MDMW-10
PANS:
66610 TOP & PAN ASSY MDMW-10
HARDWARE:
51053 NUT KEP 8-32 PK100
Date 8/03/00 WELLS MANUFACTURING COMPANY PAGE 2 RKPSTD04
PARTS LIST: SP250 SERV PART MDMW-10
ILLUS. # PART NO. DESCRIPTION
HARDWARE:
51715 SCREW PHL 8-32X5/16 PK100
53474 CLIP FG GRIDL PK12
54284 RIVET
55135 SCREW RND PHL 6-32X1/4 PK25
55736 NUT KEP 8-32 GREEN PK10
57567 SCREW 8 TAPG
60612 SCREW TRS SS 1/4-20X1/2
63201 SPACER 3/8DX5/16
66151 SPACER ELEM PAN BMW-206
ACCESSORIES:
21657 FEET RUBBER PK OF 4
21658 TIMER BRACKET MDMW-3
21701 LID COVER 1/3X6 MDMW-10
21702 PAN INSERT 1/3 X 6 MDMW-10
21792 PAN & LID CAMBRO 1/3 X 6 1EA
/