AT Communication CRYMOBILE-200 User manual

  • Hello! I am an AI chatbot trained to assist you with the AT Communication CRYMOBILE-200 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Voice Encryptor
CRYMOBILE-200
For VHF/UHF Portable Transceiver
User’s Manual
Document No : D003005
CRYMOBILE-200 User’s Manual
1
Contents
Configuration and Installation ..…………….………………..……..2
How To Use….……………………………..………………….……...4
User’s Manual CRYMOBILE-200
2
1
3
4 5 6
2
1. Configuration and Installation
1) Configuration
Fig.1. Front of CRYMOBILE-200
Fig.2. Top of CRYMOBILE-200
CRYMOBILE-200 User’s Manual
3
1 – [PWR] LED : Indicate power supply status.
2 – [S] LED : Indicate normal status of device.
3 – [N] LED : Indicate Encrypted dialogue status.
4 – Power Switch :
Power switch.
5 – RS-232C Port : Battery charge or local control.
6 – Earset with PTT and MIC(attached).
2) Installation
- Connect between transceiver and CRYMOBILE-200 using the
supplied ACC cable.
- Insert the earset with PTT and MIC into ear.
Fig.3. Assemble of CRYMOBILE-200
User’s Manual CRYMOBILE-200
4
2. How To Use
1) Power on.
Then [PWR] LED lights up green color and [S] LED lights
up red color.
2) Push and hold PTT button of earset and then have some
talks.
- [N] LED lights up at blue color.
3) Release PTT button of earset to hear.
- When PTT released, device is ready to receive.
/