Hitachi UB18D User manual

Type
User manual

Hitachi UB18D is a versatile and powerful torchlight that offers a range of features to meet your lighting needs. With its adjustable head angle, you can direct light precisely where you need it, making it ideal for a variety of tasks, including close-up work, inspections, and outdoor activities. The torchlight's long operating time of up to 4.5 hours (when using a fully charged EB1830HL battery) ensures uninterrupted use, even during extended periods of darkness.

Hitachi UB18D is a versatile and powerful torchlight that offers a range of features to meet your lighting needs. With its adjustable head angle, you can direct light precisely where you need it, making it ideal for a variety of tasks, including close-up work, inspections, and outdoor activities. The torchlight's long operating time of up to 4.5 hours (when using a fully charged EB1830HL battery) ensures uninterrupted use, even during extended periods of darkness.

Bulb
Head
Switch
Handle
110°
Front
cover
Remove
Attach
Insert
Remove
Handle
Latch
Push
Battery
Push
TORCHLIGHT UB18D
Please read the following instructions throughly before using this torchlight, and use it correctly.
CAUTION
Do not look at the light directly.
Do not open the front cover immediately after using the torchlight because the bulb is very hot.
Be sure to turn the switch OFF before replacing the bulb or when not using.
Do not expose the torchlight to rain.
Do not shock or disassemble the torchlight.
Do not allow the torchlight to contact gasoline, thinner etc.
Do not leave the torchlight in a car or the like that tends to be exposed to be searching heat of the sun
(above 60°C). Otherwise, troubles can result.
SPECIFICATIONS
Battery
EB14, EB18, BCC14, BCC18, BCH14, BCH18, BCL14, BCL18,
EBL14, EBM18 series (sold separately)
Bulb 18 V, 0.6 A
Operating time
Approx. 3 hours (Using full charged EB1820L battery)
Approx. 4.5 hours (Using full charged EB1830HL battery)
Dimensions (without battery) 85 mm (diameter) × 252 mm (length)
Weight (without battery) 0.3 kg
HOW TO USE
1234
1. BATTERY INSERT/REMOVAL
Correctly insert the battery into the torchlight. (Fig. 1)
Pressing on the latch, remove the battery from the torchlight. (Fig. 1)
2. HEAD ANGLE ADJUSTMENT
Adjusting the lighting angle, hold the handle then adjust the head angle.
It can be adjusted at 0°, 30°, 60°, 90° and 110°. (Fig. 2)
3. BULB REPLACEMENT
(1) Remove the front cover. (Fig. 3)
(2) Replace the bulb. (Fig. 4) (A spare bulb is set in the head.)
Object of declaration : Hitachi Torchlight UB18D
EC DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product conforms to RoHS Directive 20011/65/EU.
Representative o ce in Europe
Hitachi Power Tools Europe GmbH
Siemensring 34, 47877 Willich, Germany
Head o ce in Japan
Hitachi Koki Co., Ltd.
Shinagawa Intercity Tower A, 15-1,
Konan 2-chome, Minato-ku, Tokyo, Japan
31. 5. 2017
Naoto Yamashiro
European Standard Manager
31. 5. 2017
M. Harada
Executive O cer
705
Code No. C99512015 A
705
Code No. C99512015 A
Bombilla
Cabezal
Interruptor
Asa
110°
Tapa
frontal
Retirar
Conector
Insertar
Retirar
Asa
Seguro
Pulsador
Batería
Pulsador
LINTERNA UB18D
Lea las siguientes instrucciones atentamente antes de usar esta linterna, y úsela correctamente.
ADVERTENCIA
No mire a la luz directamente.
No abra la tapa frontal inmediatamente tras utilizar la linterna porque la bombilla está muy caliente.
Asegúrese de desactivar el interruptor antes de sustituir la bombilla o cuando no utilice la linterna.
No exponga la linterna a la lluvia.
No agite o desarme la linterna.
No permita que la linterna entre en contacto con gasolina, esmaltes, etc.
No deje la linterna en el coche o en lugar parecido que pueda estar expuesto al calor del sol (por
encima de 60°C). De lo contrario, podrían producirse problemas.
ESPECIFICACIONES
Batería
Series EB14, EB18, BCC14, BCC18, BCH14, BCH18, BCL14,
BCL18, EBL14, EBM18 (se vende por separado)
Bombilla 18 V, 0,6 A
Tiempo de funcionamiento
Aprox. 3 horas (con una batería de EB1820L totalmente cargada)
Aprox. 4,5 horas (con una batería de EB1830HL totalmente cargada)
Dimensiones (sin batería) 85 mm (diámetro) × 252 mm (largo)
Peso (con batería) 0.3 kg
MODO DE UTILIZACIÓN
1234
1. INTRODUCIR / RETIRAR LA BATERÍA
Introduzca la batería correctamente en la linterna (Fig. 1).
Presione el seguro para extraer la batería de la linterna (Fig. 1).
2. AJUSTE DEL ÁNGULO DEL CABEZAL
Mientras ajusta el ángulo de iluminación, sostenga el asa y ajuste el ángulo del cabezal.
Puede ser ajustado a 0°, 30°, 60°, 90° y 110° (Fig. 2).
3. SUSTITUCN DE LA BOMBILLA
(1) Retire la tapa frontal (Fig. 3).
(2) Reemplace la bombilla (Fig. 4) (En el cabezal hay una bombilla de repuesto).
Objeto de declaración : Hitachi Linterna UB18D
DECLARACIÓN DE CONFORMIDAD DE LA CE
Bajo nuestra responsabilidad exclusiva declaramos que este producto cumple con la Directiva RoHS 2011/65/UE.
Representative o ce in Europe
Hitachi Power Tools Europe GmbH
Siemensring 34, 47877 Willich, Germany
Head o ce in Japan
Hitachi Koki Co., Ltd.
Shinagawa Intercity Tower A, 15-1,
Konan 2-chome, Minato-ku, Tokyo, Japan
31. 5. 2017
Naoto Yamashiro
European Standard Manager
31. 5. 2017
M. Harada
Executive O cer
  • Page 1 1
  • Page 2 2

Hitachi UB18D User manual

Type
User manual

Hitachi UB18D is a versatile and powerful torchlight that offers a range of features to meet your lighting needs. With its adjustable head angle, you can direct light precisely where you need it, making it ideal for a variety of tasks, including close-up work, inspections, and outdoor activities. The torchlight's long operating time of up to 4.5 hours (when using a fully charged EB1830HL battery) ensures uninterrupted use, even during extended periods of darkness.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages