Teddy Speaker User Manual
MODEL: S-T1
When you want to enjoy the music with the Teddy bear, pull open the
Velcro on the back of the Teddy bear, install 2 AA batteries as request,
then adjust the switch on the battery case to "ON", zip up the Velcro.
1. Usage instruction:
Connect the bear to the connection plug on the MP3 player or iPod.
There is a connecting line with him in the arms of the Teddy Bear.
Open the music files in the iPod or MP3 player, and then you can
enjoy the wonderful music from the Teddy bear speaker.
When you want to end the music , you need to close the music file in
the iPod or MP3 player, pull out the connecting line from the MP3
player or iPod , then open the Velcro, adjust the switch on the battery
case to "OFF", then zip up the Velcro.
2. Specification:
Work with 3.5mm Audio Jack.
Compatible with MP3, MP4, Mobile phones, IPod, IPad, IPhone
(any 3.5mm Audio Jack device)
Batteries not included
Powered by 2xAA batteries (not included). The voltage for the
batteries should be 1.5v. (Attention for the battery: i) Do not mix old
and new batteries. ii) Do not mix alkaline, standard (carbon-zinc)
or rechargeable (nickel-Cd) batteries