BCM MX945GME is a motherboard that supports Intel® Core™ Solo/ Duo / Core™2 Duo / Pentium Dual-Core / Celeron® M 4xx Socket M Processors. It comes with one CPU Cooler, one IDE Cable (44 to 40 Pins), two SATA & Power Cables, one COM Port Cable, one Parallel Port Cable, one Standard I/O Shield, one Driver CD/DVD, and one User’s Quick Start Card.
The motherboard has a variety of features that make it a good choice for a variety of users. Some of the key features include:
- Support for a variety of Intel® Core™ processors
- Two DDR2 DIMM slots that support up to 2GB of memory
- Integrated Intel® Graphics Media Accelerator 950
BCM MX945GME is a motherboard that supports Intel® Core™ Solo/ Duo / Core™2 Duo / Pentium Dual-Core / Celeron® M 4xx Socket M Processors. It comes with one CPU Cooler, one IDE Cable (44 to 40 Pins), two SATA & Power Cables, one COM Port Cable, one Parallel Port Cable, one Standard I/O Shield, one Driver CD/DVD, and one User’s Quick Start Card.
The motherboard has a variety of features that make it a good choice for a variety of users. Some of the key features include:
- Support for a variety of Intel® Core™ processors
- Two DDR2 DIMM slots that support up to 2GB of memory
- Integrated Intel® Graphics Media Accelerator 950
SATA & Power cable
COM Port
Cable
CPU Cooler
MX945GME
Intel
®
Core™ Solo/ Duo / Core™2 Duo / Pentium Dual-Core /
Celeron
®
M 4xx Socket M Processors Support
User’s Quick Start Card Version 1.05 http://www.bcmcom.com
Inspect the Package:
One MX945GME Motherboard
One CPU Cooler
One IDE Cable (44 to 40 Pins)
Two SATA & Power Cable
One COM Port Cable
One Parallel Port Cable
One Standard I/O Shield
One Driver CD/DVD
One User’s Quick Start Card
Responsibility:
This manual is provided “As-Is” with no warranties of any kind, expressed or implied, including, but not limited to the
implied warranties or conditions of this product’s fitness for any particular purpose. In no event shall we be liable for any
loss of profits, loss of business, loss of data, interruption of business, or indirect, special, incidental, or consequential
damages of any kind, even the possibility of such damages arising from any defect or error in this manual or product. We
reserve the right to modify and update the user manual without prior notice.
WARNING: CMOS Battery Damage
Replace your system’s CMOS RAM battery only with the identical CR-2032 3V Lithium-Ion coin cell (or equivalent) battery
type to avoid risk of personal injury or physical damage to your equipment. Improper installation might cause battery to
explode. Always dispose of used batteries according to the manufacturer’s instructions, or as required by the local
ordinance (where applicable). The damage due to not following this warning will void your motherboard’s manufacturer
warranty.
Perchlorate Material- Special Handling May Apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
Additional Information:
Additional information on setting this board up can be found in the User’s Manual in the provided CD or DVD ROM. The
Online User’s Manual and FAQ/Knowledge Base can be found on our website by visiting our website:
http://www.bcmcom.com. If your question is not answered in our FAQ/Knowledge Base, visit our forums and post your
messages or submit a new FAQ through FAQ Submittal form for us to add your question in our FAQ with our answer.
ATTENTION: Incorrect BIOS Setup
If you do not know how to handle BIOS setup or how to set it up properly, it is strongly advisable that you do not modify
any of the settings than otherwise instructed in the User’s Quick Start Card. Even a seemingly small incorrect adjustment
or modification in the BIOS setup can render your system unstable or unusable. Incorrect BIOS setup is not covered by
your motherboard’s manufacturer warranty. Try Clear CMOS information when system does not boot after BIOS settings
change.
I/O Shield
MX945GME
Parallel Port
Cable
Chassis Intrusion (JCI1)
Pin Signal
1 Chassis
2 GND
Audio Amplifier (JAMP1)
Pin Signal
1 AMP_L-
2 AMP_L+
3 AMP_R-
4 AMP_R+
Front Audio (JAUD1)
Signal Pin Pin Signal
5V_SB 1 2 VCC3
SPDF0 3 4 NA
GND 5 6 SPDF1
LEF_OUT 7 8 SURR_OUT_R
CEN_OUT 9 10 SURR_OUT_L
AUD_GPIO21 11 12 AUDIO GND
SIDE_L 13 14 SIDE_R
Front Panel (JFP1)
Signal Pin Pin Signal
HD_LED+ 1 2 FP PWR/SLP
HD_LED- 3 4 FP PWR/SLP
RST_SW- 5 6 PWR_SW+
RST_SW 7 8 PWR_SW-
NC 9 10 [KEY]
Serial Port Connector for COM2-5
Signal Pin Pin Signal
NDCD 1 2 NSIN
NSOUT 3 4 NDTR
GND 5 6 NDSR
NRTS 7 8 NCTS
VCC_COM 9 10 [KEY]
Front USB (F_USB2)
Digital I/O (J3)
Signal Pin Pin Signal
VCC3 1 2 VCC5
N_GPIO10 3 4 N_GPIO20
N_GPIO11 5 6 N_GPIO21
N_GPIO12 7 8 N_GPIO22
N_GPIO13 9 10 N_GPIO23
N_GPIO14 11 12 N_GPIO24
N_GPIO15 13 14 N_GPIO25
N_GPIO16 15 16 N_GPIO26
N_GPIO17 17 18 N_GPIO27
GND 19 20 NC
LVDS Connector (JLVDS1)
Signal Pin Pin Signal
VCC 1 2 VCC
USB0- 3 4 USB1-
USB0+ 5 6 USB+
GND 7 8 GND
[Key] 9 10 USBOC
Signal Pin Pin Signal
+12V 2 1 +12V
+12V 4 3 +12V
GND 6 5 +12V
GND 8 7 +3V
LCDVCC 10 9 LCDVCC
DDC DATA 12 11 DDC CLK
VDD ENABLE 14 13 BKLTCTL
GND 16 15 BKLTEN
LVDS A0+ 18 17 LVDS A0-
LVDS A1+ 20 19 LVDS A1-
LVDS A2+ 22 21 LVDS A2-
LVDS ACLK+ 24 23 LVDS ACLK-
LVDS A3+ 26 25 LVDS A3-
GND 28 27 GND
LVDS B0+ 30 29 LVDS B0-
LVDS B1+ 32 31 LVDS B1-
LVDS B2+ 34 33 LVDS B2-
LVDS BCLK+ 36 35 LVDS BCLK-
LVDS B3+ 38 37 LVDS B3-
GND 40 39 GND
J4 -> COM2 J5 -> COM3
J6 -> COM5 J7 -> COM4
Motherboard Layout:
WARNING: Electrostatic Sensitive Device (ESD)
Static electricity can easily damage your motherboard and will void your motherboard warranty. Keep the motherboard
and other system components in their anti-static packaging until you are ready to install them. Touch a grounded surface
before you remove any system component from its protective anti-static packaging. Unpacking and installation should be
done on a grounded, anti-static mat. The operator should be wearing an anti-static wristband, grounded at the same
points as the anti-static mat. During configuration and installation touch a grounded surface frequently to discharge any
static electrical charge that may have built up in your body. Avoid touching the components when handling the
motherboard or a peripheral card. Handle the motherboard and peripheral cards either by the edges or by the peripheral
card case-mounting bracket.
WARNING: Misplaced Jumper Damage
Incorrect jumpers and connectors settings may lead to damage to your motherboard and will void your motherboard
warranty. Please pay special attention to not connect these headers in the wrong direction. DO NOT change ANY jumpers
while the motherboard has power.
Jumper / Connector
Name Description Note
J1 LVDS Power Selection 3 pin
J4 –J7 COM2-5 Power Jumper 3 pin
CLR_CMOS1 Clear CMOS Jumper 3 pin
JCI1 Chassis Intrusion Switch 2 pin
IDE1 IDE Connector 44 pin
SATA1 Serial ATA 1
SATA2 Serial ATA 2
JAMP1 Audio Amplifier 4 pin
JAUD1 Front Audio 2x7 pin (keyed)
CPUFAN1 CPU fan
SYSFAN1 System fan 1
SYSFAN2 System fan 2
JFP1 Front Panel 2x5 pin (keyed)
F_USB2 Front USB 2x5 pin (keyed)
J3 Digital I/O 2x10 pin (keyed)
JLPT1 Parallel Port 2x13 pin (keyed)
JLVDS1 LVDS Connector 2x20 pin
CPU Installation
This processor is intended to be professionally installed. Take proper electrostatics discharge (ESD)
precautions such as using appropriate ground strips, gloves, and ESD mats.
-
1
-
2
-
3
BCM MX945GME is a motherboard that supports Intel® Core™ Solo/ Duo / Core™2 Duo / Pentium Dual-Core / Celeron® M 4xx Socket M Processors. It comes with one CPU Cooler, one IDE Cable (44 to 40 Pins), two SATA & Power Cables, one COM Port Cable, one Parallel Port Cable, one Standard I/O Shield, one Driver CD/DVD, and one User’s Quick Start Card.
The motherboard has a variety of features that make it a good choice for a variety of users. Some of the key features include:
- Support for a variety of Intel® Core™ processors
- Two DDR2 DIMM slots that support up to 2GB of memory
- Integrated Intel® Graphics Media Accelerator 950
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
BCM RX45Q User's Quick Start Card
-
-
-
-
BCM Advanced Research MX945GME User manual
-
-
-
-
-