Quick Start Guide
5
INSTALLING THE SOFTWARE
SOFTWARE SETUP
NEED MORE HELP?
6
7
Launch Waves Central.
Click on Easy Install & Activate. Log into your Waves account. Any products that are not currently activated will appear
on the list. Make sure that your DiGiGrid Desktop interface driver and SoundGrid Studio are checked, and click on the
Install & Activate button.
Restart your computer.
The first time you launch SoundGrid Studio, the Wizard will open. The Wizard will scan the network and automatically
add and configure the connected devices. If the Wizard does not start automatically, click the Start Auto Config button,
which is next to the Network Port.
Choose “NEXT” to start automatic configuration. This will
take a few moments. Choose “CANCEL” to configure manually.
If the Wizard cannot locate your DiGiGrid Interface, then
check they are turned on and connected properly. In such
a case the Wizard will allow you to rescan the network or
work as a Driver node slaved to another system. For more
information please refer the SoundGrid Studio User Guide.
When configuration is complete, close the window. If there’s
still a problem, you can use the System Inventory page to assign
devices, control the network, and manage clocking. To learn
how to use this page, please refer to the SoundGrid Studio
Application user guide.
User Guide can be downloaded at http://www.waves.com/
downloads/manuals.
Version 1.0 May 2016 © DiGiGrid 2016
For technical support (downloads, registration or software installation) please visit www.waves.com/support
For hardware and packing issues, www.digigrid.net/tech-support
For CE safety instructions, please see the enclosed documentation.
Please retain the original packaging for future use.