jWIN JD-VD904 Quick Manual

Brand: jWIN

Model: JD-VD904

Type: Quick Manual

Identifying Your DVD Recorder and Remote Control

Rear Panel

Front Panel Buttons

60 -178 -C0 201 XA

6 75

Analog Audio-Out

jack

Analog audio output

Composite Video-Out

jack

Composite video output

Component Video-

Out jacks

YUV Component video

output

Cooling Fan

AC Power cable



By connecting the RF coaxial

cable to the ANTENNA IN/

TV OUT jacks (1)(2) of the

DVD Recorder, you can

still watch your TV even if

the DVD Recorder is off.

TV OUT jack

Coaxial signal output to the

TV’s coaxial signal input

ANTENNA IN jack

Coaxial input connection from

antenna or cable TV provider

S-Video Output jack

Separate “Y” and “C” video

signal output to TV’s S-Video

input

Digital Audio-Output

Coaxial jack

Digital coaxial audio output

to TV’s Digital Audio coaxial

input

Note:

The back panel layout is

subject to change if revised.

If so, please check each

connector’s text description,

which remains unchanged.

Welcome

to the DVD+R/RW Recorder Quick Guide.

Before attempting to operate this unit, read the Quick

Guide. The style of the product shown in the Quick Guide

may differ from the actual unit due to design changes

and improvements.



Readable Disc Formats: DVD/DVD+R/DVD+RW/

Audio CD/Kodak Picture CD/JPEG

Picture CD/

MPEG 4



Recordable Disc Formats: DVD+R/DVD+RW



The DVD Recorder provides

digital and analog audio

outputs, along with composite,

S-Video, and component video

outputs. To make your home

entertainment experience more-

enjoyable, use its digital audio

and its component video outputs

if your equipment supports this.

STANDBY/ON

EJECT

PLAY

STOP

SOURCE

REC

Analog Audio-In

jack

Analog audio input

L R

Composite Video-In

jack

Composite video input

Composite Video-In

S-Video jack

Separated video Y, C

input

JDVD904QGV10M10EN08242005

JD-VD904

Front Panel (Input)

Connectors

Rear Panel (Output)*

Connectors

The unit’s rear panel contains one

coaxial input jack which provides the

means to receive TV signals. All the

other jacks on the rear panel are

output jacks.

Front Panel Display

1 2 3 5

DVD indicator

Lights when a DVD, DVD+R

or DVD+RW disc is loaded

+R indicator

Lights when a DVD+R disc

is loaded

+RW indicator

Lights when a DVD+RW

disc is loaded

CD indicator

Lights when an audio CD

disc is loaded

JPEG indicator

Lights when a Kodak Picture

CD or JPEG Picture CD is

loaded

Schedule REC indicator

Lights when a scheduled

recording is has been

programmed

Pause indicator

Lights when a disc is

paused

Counter Display

indicator

Displays the playback time,

recording time, and playback

mode

Dolby Digital

indicator

Lights when Dolby Digital

sound is detected

Playback indicator

Lights when a disc playback

is in progress

Remote Control

Remote Control Operation Range

Point the remote control unit approximately no more than

23 feet (about 7 meters) from the remote sensor and

within approximately 60° from the front of the unit.

 The operating distance may vary according to the

brightness of the room.

NOTE:



Do not point bright lights at the remote control signal sensor.



Do not place objects between the remote control unit

and the remote control signal sensor on the recorder.

 Do not use this remote control unit while operating

the remote control unit(s) of other equipment.

1 Power button

2 Channel button

3 Record/Disc button

4 Clear button

5 Mute button

6 Timer button

7 Cursor <(Left), >(Right),

^(Up), v(Down) buttons

8 Menu button

9 Display button

10 Rec. Quality button

11 Rec/OTR button

12 Pause button

13 Prev. button

14 Next button

15 Number buttons

16 Goto button

17 Audio button

18 Subtitle button

19 TV Sys. button

20 Eject button

21 System button

22 Video button

23 CH (+-) buttons

24 Source button

25 Play/Enter buttons

26 Return buttons

27 Edit button

28 Disc Info. button

29 Slow button

30 Stop button

31 F.Fwd button

32 F.Bwd button

33 Repeat A-B button

34 Repeat 1/ALL button

35 Program button

36 Title button

37 PBC button

38 Zoom button

39 Angle button

Connecting to Your TV and External Device

Note: Turn off the power to your TV/Recorder before making any connection.

= The colors of the connectors and plugs should match each other.

= When connecting to a TV, always connect one end of the audio/video cable to the output connectors of

the DVD recorder, and the other end to the input connectors of your TV set.

= If your TV provides Progressive Scan, connect the DVD Recorder’s "Pr/Cr", "Y", and "Pb/Cb" output jacks

to your TV's P-Scan jacks. Be sure to select a proper P-Scan output by pressing TV Sys. button repeatedly.

Connecting to a Stereo TV Set

60-1 78-C 0201 XA

RF IN

ANTENNA or

CABLE TV

Or Or

RF Coaxial

Cable

Component

Cable

S-Video

Cable

AV Cable

To TV

Connecting to a Ampli er with a Dolby

Digital or built-in Decoder

60-1 78- C020 1 X A

To TV

AV Cable

Ampli er with a built-in Decoder

Coaxial

Cable

Connecting to Standard Home Audio

Equipment

60-1 78- C020 1 X A

AV Cable

To TV

Audio Equipment

(example only)

Connecting to Record from Audio/Video

Equipment or DV

 

   

VIDEO

AUDIO

S-VIDEO

VIDEO

OUTPUT

INPUT

S-VIDEO

AV Cable

Video

Game

(example

only)

S-Video Cable

60-17 8-C02 01 XA

VIDEO

AUDIO

Connecting to Other Audio Visual System

AV Cable

To TV

(example only)

AV Cable

Videotape

Player

jacks

Video

Audio (L, R)

S-video

Component

(Pr, Y, Pb)

Coaxial

RF Coaxial

Colors

Yellow

White, Red

Black

Red, Green,

Blue

Orange

Silver

Black

Illustrations

DV cable

DV or Camcorder

Setting Up

Step 1

Power on your DVD record-

er and TV. Switch your TV

to the correct Video Input

source. A First Time Setting

Wizard appears. Press

Play/Enter to continue.

Step 2

TV Type Setting

Press

to select

the type of your TV system.

Press

Play/Enter to

conrm and continue.

STANDBY/ON

Step 3

Date Time Setting

Press

and Number buttons to

set the clock manually.

Press

Play/Enter to

continue.

Step 4

Tuner Mode Setting

Press

to select

the source of your TV

tuner. Press

Play/

Enter to continue.

Step 5

Auto Scan Setting

Press

to highlight

“Start” and press

Play/Enter button to start

channel search.

Step 6

Setup Completed

Message

First Time Setting now

commpletes!

Press

Play/Enter to

exit.

Recording

Step 1

Press STANDBY/

ON button on the recorder

or press

Power on

the remote control to turn

on the recorder.

STANDBY/ON

Step 2

Turn on your TV. After

few seconds, the TV

program and its channel

number appears on the

screen.

Step 3

Press

CH(-+)

buttons to select the chan-

nel to record. Place an

unnalized DVD+R/RW

disc onto the tray.

Step 4

Press

Stop and then

Rec/OTR to start

recording the selected TV

program. Press

Stop

button to stop recording.

Step 5

A Title Editing Menu

automatically appears on

the screen. Press

to select the title just

recorded.

Step 6

Press

Play/Enter to

playback the title.

Enjoy Your DVD

Recorder!

CH 2

CH 9

Power button

jWIN JD-VD904 Quick Manual

jWIN JD-VD904 Quick Manual

jWIN JD-VD904 Quick Manual

Related papers

Other documents