ASA Electronics XRV10 User manual

Brand: ASA Electronics

Model: XRV10

Category: Car media receivers

Type: User manual

This manual is also suitable for

XRV10 STEREO

XRV10

Operating Instructions

10.1” Double DIN Multimedia Receiver

SiriusXM Ready™ / Built-In BT Technology /

iPhone® - iPod® / MHL / HDMI / USB / AV In

XRV10

Contents

CONTROLS AND INDICATORS ................................................................ 6

QUICK START GUIDE ............................................................................. 8

EQUALIZER CONTROL MENU .................................................................. 9

SYSTEM SETTINGS............................................................................... 10

RADIO TUNER OPERATION .................................................................. 13

USB OPERATION .................................................................................. 15

Bluetooth Mode ................................................................................... 19

iPod Mode ........................................................................................... 21

SiriusXM

RADIO OPERATION ............................................................. 22

Using a Smartphone via HDMI/MHL .................................................... 27

CAMERA OPERATION ........................................................................... 29

SWC Ready .......................................................................................... 31

Other Modes ........................................................................................ 32

Troubleshooting .................................................................................. 33

Specications ...................................................................................... 35

XRV10

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference.

(2)This device must accept any interference received, including interference that may cause undesired

operation.

Changes or modications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the

equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandreceiver.

• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris

connected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator

& your body.

This unit supports only the following iPod/iPhone models:

· iPhone SE

· iPhone 6s Plus

· iPhone 6s

· iPhone 6 Plus

· iPhone 6

· iPhone 5s

· iPhone 5c

· iPhone 5

· iPod touch (6th generation)

· iPod touch (5th generation)

“Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to

connect specically to iPod, or iPhone, respectively, and has been certied by the developer to meet

Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory

standards. Please note that the use of this accessory with iPod or iPhone may affect wireless

performance.

iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries.

Sirius, XM and all related marks and logos are registered trademarks of Sirius XM Radio Inc. All rights

reserved.

XRV10

Thank you for choosing a ASA product. We hope you will nd the instructions in this owner’s manual

clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the

features of your new unit Multimedia Receiver for maximum enjoyment. Please save this manual for

future reference.

We recommend having your unit Multimedia Receiver installed by a reputable installation shop.

FEATURES

MP3 / WMA

• ID3TagCompatible

• DirectorySearch(MP3/WMAOnly)

• Random,RepeatandIntro

• Play,Pause,Stop,NextTrackandPreviousTrack

AM-FM

• USA/EuropeanFrequencySpacing

• 30StationPresets(18FM/12AM)

• AutoStereo/Mono

• Local/Distance

• AutoStore/PreviewScan

iPod

/iPhone

• iPod

iPhone

via USB

• HighSpeedDirectConnectInterfacetoAccessiPhone

and iPod

Playlists, Artists, Albums

• PowerManagementChargesiPhone

/ iPod

while Connected

SiriusXM Ready®

• SatelliteChannelName,Artist,Song,andCategoriesDisplayedonMonitor(VehicleTunerand

Subscription required and sold separately)

Chassis

• FixedFrontPanel

• HighDenitionTFTLCD

General

• BeepToneConrmation(ON-OFFOption)

• BTHands-FreeoperationforsafetyandconvenienceandA2DPforstreamingmusicfromyour

smartphone.

• OneCompositeVideoOutputforAdditionalScreens

• FrontPanelAudio/VideoInput

• FrontPanelUSB-PlaybackMusic/VideoFilesviaPortableHardDrives/USBashdrives

• Ten-BandGraphicEqualizer

• 6VRMSFront/Rear/SubwooferRCALineOutput

• TouchScreenCalibrationMode

• RotaryEncoderAudioControl

• HDMI/MHLConnectivity-SeeandcontrolsmartphoneappsonthelargerTFTscreen.*Someapps

may not be supported.

• USBChargingCurrent-2.1AmpSupport

Camera

• Theunitcanconnectwith3cameras:CAM1,CAM2,CAM3.Eachcameracanbetriggeredseparately

and can be set in dierent trigger priority.

XRV10

WARNING! Never install this unit where operation and viewing could interfere with safe driving

conditions.

WARNING! To reduce the risk of a trac accident (except when using for rear view video camera)

never use the video display function while driving the vehicle. This is a violation of federal law.

WARNING! Never disassemble or adjust the unit.

WARNING! To prevent injury from shock or re, never expose this unit to moisture or water.

WARNING! Using an improper fuse may cause damage to the unit and result in re.

XRV10

CONTROLS AND INDICATORS

1. [ ] Knob

Rotate to adjust the volume.

Press momentarily to activate the MUTE function. Press again to resume normal listening.

Press to turn the unit ON. Press and hold to turn the unit OFF.

2. [ ] Button

Press to switch between the sources menu and the previous source.

3. [ ] Button

Press to adjust the brightness of the screen.

4. [ ] Button

Next / Seek up

5. [ ] Button

Previous / Seek down

6. Interface Cover

 Coversthe3.5mmAVIn,USBslot,andResetbutton.

7. USB Connector

Connect a USB device for playback of music/video les.

8. Reset Button

Press to reset system settings to factory default (except password and parental lock

settings).

9. A/V Input

 Acceptsa3.5mmjackthroughwhichsignalsfromvariousaudio/videodevicescanbe

applied to the unit.

Notice:

The graphic in this manual is for reference only, and may be different

from the actual unit. Reference to actual unit is suggested.

OPEN

XRV10

NOTES ON REMOTE CONTROL USAGE

• AimtheremotecontrolattheTFT/screen.

• Removethebatteryfromtheremotecontrolorinsertabatteryinsulatoriftheremotecontrolwill

not be used for a month or longer.

• DONOTstoretheremotecontrolindirectsunlightorinahightemperatureenvironment,oritmay

not function properly.

• Thebatterywilllastfor6monthsundernormalconditions.Iftheremotecontroldoesnotwork,

please change the battery.

• UselithiumbatterytypeCR2025(3V)only.

• DONOTrecharge,disassemble,heatorexposethebatterytore.

• Insertthebatteryintheproperdirectionaccordingtothe(+)and(-)polaritymarks.

• Storethebatteryinaplacewherechildrencannotreachittoavoidtheriskofanaccident.

Remote Control Function Description

1. SOURCE (SRC) Button: Press this button to switch between and select available sources. (Radio/

Phone/USB/Phone-Audio/SWC/AUX-1/AUX-2/ Camera)

3. AUDIO Button: Press to display and select the audio language.

Each time the button is pressed, the language changes.

NOTE: The languages for audio vary from le format.

4. VOLUME Button (VOL + and -): Press these buttons to increase or decrease the playback volume.

5. BAND Button: Press this button to scroll though preset stations or when in playback mode, this

button is used for Fast playback / Slow playback. Press this button to answer an incoming BT phone

call.

6. REPEAT (RPT) Button: Repeat playback

7. POWER/MUTE Button ( /MUTE

): Press this button to turn the unit ON

and long press to OFF.

When on, press this button to turn the audio output ON and OFF.

8. SUBTITLE (SUB-T) Button: Press to display and select the subtitle language in USB mode. Each time

the button is pressed, the subtitle language changes.

NOTE: The type and number of languages for subtitles vary from le format.

9. MENU Button: Press this button to access the root menu during playback. The playback will return

to normal playback and the root menu will disappear if no selection is made within 10 seconds.

10. FAST FORWARD [ ] Button:Pressthisbuttontoforwardplay2x,4x,8xor20xnormalspeed.

Press this button while in Radio mode to search available radio station by increasing tuning

frequency.

11. NEXT ( ) Button: Press this button to skip to the next chapter, track or song during playback.

Press this button while in Radio mode to search available radio station by increasing tuning

frequency.

12. PLAY / PAUSE ( / ) Button: Press this button to pause the playback. Press this button again to

resume normal playback.

13. PREVIOUS ( ) Button: : Press this button to go back to the previous chapter, track or song

during playback. Press this button while in Radio mode to search available radio station by

decreasing tuning frequency.

14. FAST REVERSE [ ] Button:Pressthisbuttontoreverseplay2x,4x,8xor20xnormalspeed.Press

this button while in Radio mode to search available radio station by decreasing tuning frequency.

15. NUMBER Buttons (1-6): Press these buttons to directly access chapters and tracks, dialing phone

numbers, or entering passwords.

16. RANDOM (RDM) Button: Press this button to play tracks or chapters in random order while

playing music.

XRV10

Power On / Off

Press the

[

]

knob on the unit to turn the unit on. The buttons on the front of the unit

light up for a moment and the current mode status appears in the LCD.

Press and hold the

[

]

knob to power off the unit.

Playing Source Selection

Press the [ ] button on the front panel to display the playing

source menu.

1. Prev or Next: Touch to view the previous or next page of

playing

source

Playing source

icon: touch to access corresponding work mode.

3. Clock

4. Enter EQ setting menu

Volume Adjustment

To increase or decrease the volume level, turn the

[

]

knob on the front panel. The

volume range is from “0” to “50”. The LCD or TFT screen displays the volume level for 3

seconds.

Mute

Press [

] knob to mute the volume from the unit. Press again to restore the volume. [ ] is

displayed on the LCD. Adjusting the volume or using any of the audio setup features cancels the mute

function.

Parking Brake Inhibit

• Whenthe“BRAKE”cableisconnected tothebrakeswitch, thedisplayontheTFTmonitor

will display video only when the vehicle is applied.

• ParkingbrakefunctionisoverriddenwhenthevideosourceissettoREVERSE.

• Whentheparkingbrake inhibitisactive,thefront monitordisplaysWarninginformation,

preventingthedriverfromwatchingcontentwhiledriving.Rearvideoscreensarenotaffected.

Demo

Demo mode is used to illustrate the functions of the unit. Touch the screen to exit it.

Demomodeisdefaulton.YoucanturnitoffinSettingmenu.

Audible Beep Conrmation

Anaudiblebeeptoneconrmseachfunctionselection.TheBeeptonecanbedisabledthrough

theSetupmenu.

QUICK START GUIDE

1 1

XRV10

EQUALIZER CONTROL MENU

The Audio Control feature allows you to easily adjust your audio system

to meet the acoustical characteristics of your vehicle, which vary

depending on the type of vehicle and its measurements. Proper setting

oftheFaderandBalancebooststheeectsofthecabinequalizer.

Select Preset Equalizer

1. Enter the EQ setup mode

Touch the [ EQ ] icon in the user interface and the EQ setup interface

will display on the screen.

2. Select EQ mode

Touch the desired EQ selection: [ Optimal ] / [ Classic ] / [ Rock ] / [

Jazz]/[Techno]/[Pop],andtheEQmodewillchange.

Adjust EQ Parameters

To adjust EQ parameters, select [User] and touch and drag the

parameters adjustment bar.

[ User ]: Set the desired audio eect.

[ Flat ]: Select the original audio eect.

[ Reset ]: Reset the user settings.

Adjust Fader Balance

You can adjust front/back/left/right balance of the speaker and the

subwoofer volume to get balanced listening effect according to the

surroundings and your interest.

1. Enter the EQ setup mode

Touch the [ Fader Balance ] icon in the user interface and the EQ

setup interface will display on the screen.

2. Adjust subwoofer volume

Touch [ ] / [ ]toadjustsubwoofervolumefrom-12to+12.

3.Adjustfader/balancevalue

Touch [ ] / [ ] / [ ] / [ ] to adjust fader / balance value from

-20to+20.

[ ]: Front speaker

[ ]: Rear speaker

[ ]: Left speaker

[ ]: Right speaker

Notes:

1. The parameters of the EQ modes has been preset and you can not

change them besides ‘User’.

2. The value of Sub is independent of EQ mode and can be adjusted

separately.

XRV10

Display System

1. Touch the upper left corner to display main menu.

2. Touch [ Settings ].

The settings menu is displayed.

Adjust General Settings

1. Touch[General],ifnecessary.

2. Touch to highlight a setting.

3. Touchontheoptiontodisplay/selectanoption.

General settings Options Description

Radio Region

USA/China/Japan/Europe/Europe

(LW)/OIRT

Select one that matches your location.

Radio Lo/Dx

Local

Select radio local or distance. When select local, only

stations with sucient strength will be detected.

Distance

TFT Standby O/10s/20s Select the TFT standby status.

Display Adjust Night/Dark/Normal/Bright Select the brightness of the screen.

Beep

Turn on the beep sound. Each time you press a button, the

unit beeps.

O Turn o the beep sound.

Illumination Setup the the backlight color of the buttons..

UI Color Green/Red/Amber/Blue/Purple Select the UI color.

Demo

On Enable the demo of operations.

O Disable the demo of operations.

Camera

Conguration

To show the camera settings.

4. Touch top left of the screen to exit.

Adjust sound settings

1. Touch [Audio].

2. Touch an option repeatedly to select:

Sound settings Options Description

Subwoofer

On Turn on the subwoofer.

O Turn o the subwoofer

Sub Woofer Filter

80Hz

Select subwoofer lter criteria.120Hz

160Hz

3. Touchtopleftofthescreentoexit.

SYSTEM SETTINGS

XRV10

Adjust Time Settings

1. Touch [ Time ].

2. Touch an option repeatedly to select:

Time settings Options Description

Date Y/M/D

Touch [ ] or [ ] to set year, month and day. Press and hold for rapid

adjustment

Clock Mode 12Hr/24Hr

Touch [12Hr] or [24Hr] to switch clock mode.

Time

H/M/AM/

Touch [ ] or [ ] to set hour and minute. Press and hold for rapid

adjustment

Touch [ ] or [ ] to set

AM/PM (only for 12Hr)

3. Touchtopleftofthescreentoexit.

Adjust Language Settings

1. Touch [Language].

2. Touch an option repeatedly to select:

Language settings Description

OSD Select on-screen display language.

3. Touchtopleftofthescreentoexit.

Adjust Bluetooth Settings

1. Touch [ Bluetooth ], if necessary.

2. Touch to highlight a setting.

3. Touchontheoptiontodisplay/selectanoption.

General settings Options Description

Bluetooth On/O Select Bluetooth On or O.

Auto Connect On/O Select Auto Connect On or O.

Auto Answer On/O Select Auto Answer On or O.

Pairing Code Setup the pairing code.

Reset the system

1. Touch [Reset].

2. Touch an option repeatedly to select:

Reset settings Description

Load Factory Load the factory settings.

3. Touchtopleftofthescreentoexit.

XRV10

Adjust Volume Settings

You can set dierent volume for dierent modes.

1. Touch [Volume].

The volume setting sub-menu is displayed.

2. Touch to select a source.

3. Selectavaluefrom00to06.

When switching to the source, the volume increases automatically.

4. Touch top left of the screen to exit.

Version Sub-Menu Features

The Version Sub-Menu is used to identify the model and resident operating system as well as the

hardware and software versions.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, touch the Source icon on the screen.

XRV10

Select Radio as Playing Source

Open the Source Menu and then touch [Radio].

Select One Radio Band

Touchthe[Band]iconontheuserinterfacetoselectoneradiobandamongFM1,FM2,FM3,AM1and

AM2.

Tune

Auto Tuning

Press [ ] / [ ] icon on the user interface to seek a higher / lower station.

To stop searching, repeat the operation above or press other keys having radio functions.

Note:

When a station is received, searching stops and the station is played.

Manual Tuning

Method 1:

During manual tuning, the frequency will be changed in steps.

Press and hold [ ] / [ ] icon on the user interface more than 1 second to tune in a higher / lower

station.

RADIO TUNER OPERATION

1. Return to home menu.

2. Preset stations list.

3. Show/Hidethenextlineofoptionsmenu.

4. Seek backward

Tune backward(long press)

5. Auto searching.

6. Seek forward

Tune forward(long press)

7. Band switch.

8. Show RDS options

9. Show the save list

10. Choose local or distant seeking mode.

11. Enter frequency directly.

12. Enter EQ menu.

Tuner TFT Display

3 4 5 76

10 11 12

XRV10

Method 2:

1. Touch the numeric keypad icon [ Direct Entry ]. Numeric

keyboard is displayed, touch numbers to input frequency.

2. Touch [ ] to delete the input numbers step by step.

3. Touch[OK]toenter.

Preset Station

Theunithas5bands,suchasFM1,FM2,FM3,AM1,AM2,andeachbandcanstore6stations;hencethe

unitcanstore30stationsintotal.

Search Stations Automatically

Touch [ AS/PS ] to search station and store 6 strongest stations in current band automatically.

Manual Store

1. Tune to a station.

2. Press and hold one of the channels 1 to 6 on the screen to save the selected station.

Tune to a Preset Station

1. At radio mode, select a band (if needed).

2. Touch one of the preset channels on the screen.

Local Seeking

Press the [ More ] and [ Local/Distance ] icons to choose the Radio Distance or Local .

When the [ Local ] displays, only stations with a strong signal strength will be detected .

EQ Selection

Press the [ More ] and [ EQ ] icon to enter the EQ setup menu.

Option Screen

Touching the Options icon will display the following RDS, CT and PTY functions on the Tuner TFT LCD

display screen.

RDS ON/OFF - The Radio Data System (RDS) enables traffic

reports to be received and provides many facilities, including

enabling the radio station name to be displayed.

PTY - The Program Type (PTY) function displays the program

category of the current station such as category (news, sports,

talk etc.) Use the scroll bar to select various categories. After

selecting a category, press the Search or down arrow icon to

scan to the next station of the selected category. Touching the

Back icon returns the user to main tuner screen.

XRV10

Connecting the USB Device

1. Open the USB door.

2. Connect an USB device into the USB connector.

Play starts automatically.

NOTES:

1. If there are audio files supported on the USB stick, the system will enter the audio files menu

automatically.

If there are no audio les, but there are video les supported on the USB stick, the system will enter

the video les menu automatically.

If there are no audio or video les, but there are picture les supported on the USB stick, the system

will enter the picture les menu automatically.

If there no above audio/video/picture les supported in the USB stick, the screen will display “Load

Error!”.

2. Not all USB devices are compatible with the unit.

Removing the USB Device

1. Select another source in the main menu.

2. Remove the USB device.

Audio playback

Theprinciplesofaudioplayback(MP3/WMA)fromdatacarriersareidenticalforallsources.

Select the desired source via the main menu.

The device changes to the desired source and the playback starts.

If the playback does not start with the audio playback, touch the [ List ] icon to change to the folder/le

list.

Touch the [

] icon to display all the folders and les of the data carrier.

- Or -

Press the [ ] icon to display all the audio les of the data carrier.

After starting a title, the playback menu is displayed.

USB OPERATION

XRV10

1. Show/Hide the next line of options menu.

2. Display the folder/le list.

3. Shortpress:Previoustrack.

Long press: Fast backward.

4. Pause playback and continue playback.

5. Short press: Next track.

Long press: Fast forward.

Tap on [ More ] to display additional operating options of the playback menu.

6. Shue playback.

7. Start and end REPEAT function.

Repeat mode: Repeat One

→

Repeat Folder

→

Repeat All

→

Repeat O

8. Displayequalizer.

9. Display keypad to directly enter the number of the desired title.

Video playback

Select the desired source via the main menu.

The device changes to the desired source and the playback starts.

If the playback does not start with the video playback, touch the [ List ] icon to change to the folder/le

list.

Touch the [

] icon to display all the folders and les of the data carrier.

- Or -

Touch the [

] icon to display all the audio les of the data carrier.

If you selected a movie, the playback is started. During the movie playback, the playback menu is

hidden.

XRV10

Brieytouchthescreenoncetodisplaytheplaybackmenuagain.

The playback menu is shown.

1. Show/Hide the next line of options menu.

2. Enter EQ menu.

3. Shortpress:Previousmovie.

Long press: Fast backward.

4. Pause playback and continue playback.

5. Short press: Next movie.

Long press: Fast forward.

6. Display keypad to directly enter the number of the desired title.

Tap on [ More ] to display additional operating options of the playback menu.

7. Display the folder/le list.

8. StartandendREPEATfunction.

Repeat mode: Repeat One

→

Repeat Folder

→

Repeat All

→

Repeat O

9. Adjust the brightness, contrast, and saturation.

Image playback

Select the desired source via the main menu.

The device changes to the desired source and the playback starts.

If the playback does not start with the image playback, touch the [ List ] icon to change to the folder/

le list.

Touch the [

] icon to display all the folders and les of the data carrier.

- Or -

Touch the [ ] icon to display all the images of the data carrier.

If you selected a image, the playback is started. During the playback, the playback menu is hidden.

Brieytouchthescreenoncetodisplaytheplaybackmenuagain.

XRV10

1. Show/Hide the next line of options menu.

2. Enter EQ menu.

3. Previousimage.

4. Pause playback and continue playback.

5. Next image.

6. Display keypad to directly enter the number of the desired title.

Tap on [ More ] to display additional operating options of the playback menu.

7. Display the folder/le list.

8. Showtheoriginalphoto.

9. Rotate images .

10. Zoom in/out.

11. Adjust the brightness, contrast, and saturation.

XRV10

You can make or receive phone calls with Bluetooth-enabled phones

through the unit. You can also listen to music from a Bluetooth-enabled

device.

Pair the Bluetooth-enabled Devices

To connect your Bluetooth device to the unit, you need to pair the device

to the unit. Pairing needs only to be done once. You can pair up to ve

devices. You also can search for Bluetooth devices by mobile phone.

1. Turn ON the Bluetooth function on the device.

2. Search for Bluetooth devices by mobile phone.

3. SelecttheBluetoothdeviceID(shownonthescreenoftheunit)inthe

pairing list.

4. Enterdefaultpassword“1234”ifnecessary.

Tip:

• TheoperationalrangebetweenthisunitandaBluetoothdeviceis

approximately 5 meters .

• BeforeyouconnectaBluetoothdevicetothisunit,familiarizeyourself

with the Bluetooth capabilities of the device.

• CompatibilitywithallBluetoothdeviceisnotguaranteed.

• AnyobstaclebetweenthisunitandaBluetoothdevicecanreducethe

operational range.

• Keepthisunitawayfromanyotherelectronicdevicethatmaycause

interference.

Disconnect Bluetooth Device

To disconnect one device, touch [ ] .

Tip

• Thedevicewillalsobedisconnectedwhenthedeviceismoved

beyond the operational range.

• Ifyouwanttoreconnectthedevicetotheunit,placeitwithinthe

operational range.

• Ifyoudonotwanttoreconnectthedevicetotheunitautomatically,

touch

[

], then set [ Auto connect ] to Off (the green icon turns

grey).

For details, see the “Adjust Bluetooth Settings” section.

Make a Call

1. Select Bluetooth function in the home menu.

2. Pair the phone with the unit.

3. Searchforphonenumberfromthefollowinglist:

[Phone Book]

[Call History]

[Missed calls]

[Received calls]

[Dialed calls]

Or touch the number pad directly, then touch [ ] to dial.

Bluetooth Mode

XRV10

Receive a Call

By default, all incoming calls are received automaticaly.

1. If there is an incoming call,

the screen will appear “Incoming

call...”

2. You may touch the screen to select [ ] or [ ].

Speak into the Bluetooth microphone.

Tip

• Youcanselecttoreceivecallsmanuallybyset[AutoAnswer]toO

status.

Push to Talk

Press[PushtoTalk]onthescreentoaccessSiriorGoogleVoicethrough

the head unit when connected via BT. You mobile phone must support

SiriorGoogleVoiceinorderforthisfeaturetobesupportedonthe

head unit.

NOTE: Samsung “S” Voice and other third-party apps may not be

supported.

Adjust Bluetooth Settings

1. In Bluetooth menu, touch [ ].

The option menu is displayed.

2. Touch on the selected option to change the setting.

∙ [BT]: To turn on or o “Bluetooth” function.

∙ [Auto Connect]: To turn on or o “Auto connect” function.

∙ [Auto Answer]: To turn on or o “Auto answer” function.

∙ [Pairing code]: To set paring code.

∙ [Phonebook Sync]: Phonebook sync may take several minutes to load

on initial setup.

Music Mode

A2DP

A2DP is short for Advanced Audio Distribution Profile. The mobile

phones supporting this function can transmit stereo audio, whereas the

ones not supporting this function can transmit mono audio only.

AVRCP

AVRCP is short for Audio/Video Remote Control Profile. The mobile

phones supporting this function can control the playback of a

Bluetooth audio player.

In the mode of the music player working, if you want to make a phone

call, you can press the number keys on the mobile phone. At the same

time the music player will stop. The TFT screen will display “Calling”, after

the call received, the voice will be transferred to the unit. When the call

ends, the screen will display music playing menu.

If there is an incoming phone call, the music player will stop, and the

screen will display “Incoming”. When the call ends, the screen will

display music playing menu.

Page is loading ...

ASA Electronics XRV10 User manual

Brand: ASA Electronics

Model: XRV10

Category: Car media receivers

Type: User manual

This manual is also suitable for

XRV10 STEREO

Download PDF

report

ASA Electronics XRV10 User manual

This manual is also suitable for

ASA Electronics XRV10 User manual

Related papers

Other documents