How to change the setting and define label size
Please confirm you already install the printer well, and then thermal paper has been
placed correctly.
1. Open a file (Sample program is Adobe), click “print”-->”Features”, following page will be
displayed.Click ‘Page Setup” and select the paper size you need.
2. If you can not find the paper size you need, please click “New” to define a new label size, and
click “ok” to save it. If you need to change the setting of this printer, you can do directly on this
page, such as speed and concentration.
-
1
-
2
-
3
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI