For the ultimate in convenience, your Gree Heat Pump or Air Conditioner features a built-in intelligent
Wi-Fi capability and Smart Control function. This allows you to operate the unit through your smartphone.
The system is compatible with devices using standard Android or iOS operating systems. For instructions
on how to install the Wi-Fi Module, see reverse side of this guide.
Operating System Requirements for your smartphone:
iOS System supports iOS 7.0 and above.
Android System supports Android 4.0 and above.
STEP 1. Download and install GREE+ app on your smartphone
Scan QR code #1 at right to download the app directly from the Apple App Store or the Google Play Store.
STEP 2. Turn ON the unit’s Wi-Fi interface
Using the remote controller, turn ON the Gree system. Press and hold the "MODE" and "TURBO"
buttons on the remote controller for at least 5 seconds until the unit beeps.
STEP 3. Launch the GREE+ app on your smartphone
Open the app and follow its simple step-by-step instructions to register your account and complete setup.
STEP 4. Let the app be your guide
You are well on your way to controlling the unit through your smartphone. You will find operation to
be simple and easy, allowing you to adjust comfort levels – even without the remote – from anywhere
you have Wi-Fi access.
For “Help”and updates to the GREE+ app, scan QR code #2 at right.
For more information, visit GreeComfort.com.
Specifications are subject to change without notice. Manufacturer reserves the right to discontinue, or change at any time, specifications
or designs without notice or without incurring obligations. Apple, Android, Google Play and all other trademarked materials referenced herein,
are the property of their respective owners. ©2016. All rights reserved. Cat. No. GREE_WIFIKIT_INSTALLATION_112516
Control the comfort
–
with your smartphone!
COMMON NETWORK SETTING PROBLEMS
If Wi-Fi control fails, check the following items one by one:
•
Make sure electrical power is turned on to the outdoor and indoor units.
•
Make sure Wi-Fi function is turned ON as normal
TO RESET Wi-Fi MODULE
Press "MODE" and "TURBO" buttons simultaneously. When the unit emits a beep sound, Wi-Fi module is successfully reset.
NOTE: “MODE" and"TURBO"buttons must be pressed within two minutes or you will need to repeat the process.
1.
Get the app
Scan for Help
2.
Universal Wi-Fi Kit
INSTRUCTIONAL GUIDE
WSBEC02/WSBEE03