GREE MULTI36HP410 Operating instructions

Brand: GREE

Model: MULTI36HP410

Type: Operating instructions

Module Installation

Universal Wi-Fi Kit

INSTRUCTIONAL GUIDE

WSBEC02/WSBEE03

STEP 1. Open the front panel of indoor unit

Remove screw to access the electrical box.

NOTE: Actual product may differ from images shown; please refer to actual products.

STEP 2. Remove the electrical box cover

Locate Wi-Fi module connector and wire. (The Wi-Fi connector will be the same

color as the connector on the Wi-Fi module.)

STEP 3. Remove the wire clip

Route Wi-Fi module wire into electrical box and connect to the unit's Wi-Fi connector.

NOTE: The Wi-Fi module wire must be routed through the wire channel, otherwise

the electrical box cover will not close properly.

STEP 4. The Wi-Fi module mounting location varies from model to model

To the right are the common mounting locations. Choose the one that best fits your

model. Place the Wi-Fi module in the mounting location and secure it with a screw.

STEP 5. Replace the electrical box cover and secure with a screw

The Wi-Fi module installation is complete.

Front panel

Wire clip

Wi-Fi connector

Wi-Fi module

Wi-Fi module wire

Screw

Electrical

box cover

Failure to follow this warning could result in personal injury or death.

• Before installing, servicing or modifying the system, the main electrical disconnect

switch must be in the OFF position. There may be more than one disconnect switch.

Lock out and tag all switches with a warning label.

• Installation must be performed by qualified professionals. Otherwise, it may result

in personal injury or damage.

WARNING –

ELECTRIC SHOCK HAZARD

For the ultimate in convenience, your Gree Heat Pump or Air Conditioner features a built-in intelligent

Wi-Fi capability and Smart Control function. This allows you to operate the unit through your smartphone.

The system is compatible with devices using standard Android or iOS operating systems. For instructions

on how to install the Wi-Fi Module, see reverse side of this guide.

Operating System Requirements for your smartphone:

iOS System supports iOS 7.0 and above.

Android System supports Android 4.0 and above.

STEP 1. Download and install GREE+ app on your smartphone

Scan QR code #1 at right to download the app directly from the Apple App Store or the Google Play Store.

STEP 2. Turn ON the unit’s Wi-Fi interface

Using the remote controller, turn ON the Gree system. Press and hold the "MODE" and "TURBO"

buttons on the remote controller for at least 5 seconds until the unit beeps.

STEP 3. Launch the GREE+ app on your smartphone

Open the app and follow its simple step-by-step instructions to register your account and complete setup.

STEP 4. Let the app be your guide

You are well on your way to controlling the unit through your smartphone. You will find operation to

be simple and easy, allowing you to adjust comfort levels – even without the remote – from anywhere

you have Wi-Fi access.

For “Help”and updates to the GREE+ app, scan QR code #2 at right.

For more information, visit GreeComfort.com.

Specifications are subject to change without notice. Manufacturer reserves the right to discontinue, or change at any time, specifications

or designs without notice or without incurring obligations. Apple, Android, Google Play and all other trademarked materials referenced herein,

Control the comfort

–

with your smartphone!

COMMON NETWORK SETTING PROBLEMS

If Wi-Fi control fails, check the following items one by one:

•

Make sure electrical power is turned on to the outdoor and indoor units.

•

Make sure Wi-Fi function is turned ON as normal

TO RESET Wi-Fi MODULE

Press "MODE" and "TURBO" buttons simultaneously. When the unit emits a beep sound, Wi-Fi module is successfully reset.

NOTE: “MODE" and"TURBO"buttons must be pressed within two minutes or you will need to repeat the process.

Get the app

Scan for Help

Universal Wi-Fi Kit

INSTRUCTIONAL GUIDE

WSBEC02/WSBEE03

GREE MULTI36HP410 Operating instructions

GREE MULTI36HP410 Operating instructions

GREE MULTI36HP410 Operating instructions

Related papers

Other documents