2. Optimus
  3. PU-10T

Optimus PU-10T, PU-10 User manual

  • Hello! I am an AI chatbot trained to assist you with the Optimus PU-10T User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the maximum power handling capacity of the Optimus PU-10T speaker?
    What is the RMS power rating of the Optimus PU-10T speaker at 8 ohms?
    What is the RMS power rating of the Optimus PU-10T speaker at 100 Volts?
    What is the sensitivity rating of the Optimus PU-10T speaker?
    What is the frequency response range of the Optimus PU-10T speaker?
    What is the protection rating of the Optimus PU-10T speaker?
    What are the dimensions of the Optimus PU-10T speaker?
    What is the weight of the Optimus PU-10T speaker?
    What type of connector does the Optimus PU-10T speaker have?
    What color is the Optimus PU-10T speaker?
MANUAL DE INSTRUCCIONES
PU-10 Versión 1.1 1/1
SERIE PU-10
A
TENCION:
La instalación debe ser realizada por personal técnico
cualificado.
Conectar en paralelo los altavoces a los terminales de
salida correspondientes del amplificador.
Asegurarse de que todos los altavoces tengan la
misma polaridad.
No cambiar la toma del transformador mientras el
altavoz está en funcionamiento.
No exponer el equipo a fuentes de calor, ni a la llama.
CAJA ACÚSTICA
CARACTERISTICAS
Modelos PU-10 y PU-10T
Altavoz 10”
Línea
8 (PU-10)
100 V (PU-10T)
Potencia máxima 400 W
Potencia (RMS) / impedancia
200 W / 8 (PU-10)
100 W / 100 (PU-10T)
Sensibilidad 95 dB SPL a 1 W, 1 m y 1 kHz
Presión acústica
118 dB SPL a 200 W, 1 m y 1 kHz (PU-10)
115 dB SPL a 100 W, 1 m y 1 kHz (PU-10T)
Respuesta en frecuencia 60 ~ 18 kHz
Grado de protección IP-44
Dimensiones (mm) 350 (ancho) x 460 (alto) x 340 (fondo)
Peso
10,5 kg (PU-10)
13,5 kg (PU-10T)
Acabado Plástico ABS
Conector Entrada / Salida Speakon
Color Negro
CONEXIONADO
INSTRUCTION MANUAL
PU-10 Version 1.1 1/1
PU-10 SERIES
WARNING:
Installation by qualified personnel only.
Speakers must be wired in parallel and connected to
the correct line terminals of amplifier.
Ensure that all speakers have the same polarity with
respect to each other.
Do not select another tapings if the speaker is in use.
No naked flame sources, such as lighted candles,
should be placed on the apparatus
.
CABINET SPEAKER
SPECIFICATIONS
Models PU-10 & PU-10T
Speaker 10”
Line
8 (PU-10)
100 V (PU-10T)
Power (Max) 400 W
Power (RMS) / impedance
200 W / 8 (PU-10)
100 W / 100 (PU-10T)
Sensitivity SPL (1 W / 1 m) 95 dB
Sound pressure SPL
118 dB SPL at 200 W, 1 m & 1 kHz (PU-10)
115 dB SPL at 100 W, 1 m & 1 kHz (PU-10T)
Frequency range 60 ~ 18 kHz
Protection range IP-44
Dimensions (mm) 350 (width) x 460 (height) x 340 (depth)
Weight
10.5 kg (PU-10)
13.5 kg (PU-10T)
Finish ABS
Input / Output Connector Speakon
Colour Black
CONNECTION
/