Maxell 290058 User guide

Hello! I am an AI chatbot trained to assist you with the Maxell 290058 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

How to use

These are the steps needed to use the VP-100 Head Cleaner.

 Before each use, please insert the head cleaner into the VCR and press the "Rewind"

button

 Once the head cleaner has rewound, press the "Play" button. The cleaning cycle will

now begin.

 The head cleaner will only run for approximately 20 seconds per cleaning cycle. If it is

not rewound before each use, it may not provide the full 20 second run time.

 The cleaning tape does not have a clear leader at the beginning or end of the tape, so

it will cause some VCR machines to completely shut down when the end of the tape

is reached. This is normal, most VCR's are designed to do so. If this occurs, simply

press the Rewind button. Press "Play" after the rewinding is complete.

 If problems persist, please call Maxell's 24 hour Toll-Free Tech Support line at 800-

377-5887or send an email to [email protected]