- If the supply power cord is cut or otherwise damaged, it must be
replaced by a qualified electrician or a service center.
- The fog nozzle gets very hot during the use of this machine!
(UP to 600◦F). Keep flammable materials at least 3 feet away
from the fog nozzle.
- Before cleaning or servicing it, always allow the machine to cool
to room temperature.
Danger of Explosion
- Never put any type of flammable liquids of any kind (example:
gas, oil, alcohol, perfumes, etc) in the fog fluid tank. Do not mix
these liquids to fog fluid.
- Always make sure the fluid tank is full before using machine.
Attempting to operate this machine without fluid will cause it to
overheat and damage the pump.
- If your machine stops working properly, unplug it, drain the fog
fluid from the tank, and have a qualified electrician or service
center repair the machine.
- Never transport this machine filled with any fluid. Always drain
fluids prior to transporting it.
- Do not ingest or inhale fog fluid. If fog fluid is ingested please
contact 911 immediately. If fog fluid comes in contact with skin or
eyes, rinse thoroughly with water and contact a medical doctor.