1 ft DVI-I Analog to 2x VGA Video Splitter Cable -
M/F
Product ID: DVISPL1VV
The DVISPL1VV 1ft DVI to Dual VGA Cable lets you to connect two VGA displays, or projectors to a single
DVI-I analog video output port on your computer.
Backed by StarTech.com’s lifetime warranty, the DVISPL1VV is a reliable and cost-effective solution for
splitting a single DVI-I video signal between two monitors in order to get the most out of your video card.
www.startech.com/ca
1 800 265 1844
Certifications, Reports
and Compatibility
Applications
• Output one DVI analog signal to two VGA displays simultaneously
• Perfect for board room or classroom applications when the display
needs to be output to a monitor and a projector
Features
• 1x DVI-I male connector
• 2x VGA HD15 female connectors
• Offers 12” in cable length
• Molded gold plated connectors with strain relief
• Compliant with DVI DDWG Standards
www.startech.com/ca
1 800 265 1844
Warranty Lifetime
Hardware Cable Jacket Type PVC - Polyvinyl Chloride
Connector Plating Gold
Fire Rating CMG Rated (General Purpose)
Number of Conductors 15
Connector(s) Connector A 1 - DVI-I (23 pin) Male
Connector B 2 - VGA (15 pin, High Density D-Sub) Female
Special Notes /
Requirements
Note This product will split your video signal to deliver two
identical images of the same resolution. It cannot be used to
span an image across two displays, or to show different
images on each display.
Physical
Characteristics
Cable Length 1 ft [0.3 m]
Color Black
Product Weight 5.1 oz [145 g]
Wire Gauge 28 AWG
Packaging
Information
Shipping (Package) Weight 6 oz [170 g]
What's in the Box Included in Package 1 - 1 ft DVI-I Analog to 2x VGA Video Splitter Cable - M/F
Product appearance and specifications are subject to change without notice.
www.startech.com/ca
1 800 265 1844
/
