Eastwood 5" Paintless Dent Removal Suction Cup Operating instructions

Brand
Eastwood
Model
5" Paintless Dent Removal Suction Cup
Type
Operating instructions

This manual is also suitable for

EASTWOOD
5" PAINTLESS DENT REMOVAL
SUCTION CUP
INSTRUCTIONS
Part #31608
© Copyright 2017 Easthill Group, Inc. 1/17 Instruction Item #31608Q Rev 1
If you have any questions about the use of this product, please contact
The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com
PDF version of this manual is available online >> eastwood.com/31608manual
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
US and Canada: 800.343.9353 outside US: 610.718.8335
Fax: 610.323.6268 eastwood.com
2 Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com To order parts and supplies: 800.345.1178 >> eastwood.com 3
The Eastwood 5" Vacuum Cup is an excellent solution for pulling out minor dents in auto body
sheetmetal or handling difficult to grip items such as body panels and glass.
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling,
and on all other information provided with this product:
READ INSTRUCTIONS
Thoroughly read and understand these product instructions before using
this 5" Vacuum Cup.
• Keep these product instructions for future reference.
FALL HAZARD!
• Parts may suddenly release while being pulled. Failure to ensure proper
footing can quickly result in a fall which could inflict serious personal injury
or property damage
INJURY HAZARD!
• DO NOT use the 5" Vacuum Cup to support the weight of a person or
valuable property as serious injury or property damage may occur.
• DO NOT exceed 65 lbs. of lifting or pulling capacity as serious injury or
property damage may occur.
• Use Vacuum Cup only on clean, smooth, non-porous and non-textured
surfaces.
C
ASSEMBLY
• Unthread Knob from threaded post at top of Vacuum Cup, place selected Eyelet over threaded
post and tighten Knob securely
OPERATION
• Place Rubber Vacuum Cup against a clean, smooth, non-porous or non-textured surface.
•
Depress the grey Plunger fully and repeatedly until it stays in and the red line is no
longer visible.
• Suction cup is now ready to be used. DO NOT exceed 65 lbs. of lifting or pulling capacity as
serious injury or property damage may occur.
• Release vacuum by pulling up rubber tab at the edge of the Cup.
• Always store with the Rubber Cup nested in the Protective Plastic Base.
2 Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com To order parts and supplies: 800.345.1178 >> eastwood.com 3
The Eastwood 5" Vacuum Cup is an excellent solution for pulling out minor dents in auto body
sheetmetal or handling difficult to grip items such as body panels and glass.
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling,
and on all other information provided with this product:
READ INSTRUCTIONS
Thoroughly read and understand these product instructions before using
this 5" Vacuum Cup.
• Keep these product instructions for future reference.
FALL HAZARD!
• Parts may suddenly release while being pulled. Failure to ensure proper
footing can quickly result in a fall which could inflict serious personal injury
or property damage
INJURY HAZARD!
• DO NOT use the 5" Vacuum Cup to support the weight of a person or
valuable property as serious injury or property damage may occur.
• DO NOT exceed 65 lbs. of lifting or pulling capacity as serious injury or
property damage may occur.
• Use Vacuum Cup only on clean, smooth, non-porous and non-textured
surfaces.
C
ASSEMBLY
• Unthread Knob from threaded post at top of Vacuum Cup, place selected Eyelet over threaded
post and tighten Knob securely
OPERATION
• Place Rubber Vacuum Cup against a clean, smooth, non-porous or non-textured surface.
•
Depress the grey Plunger fully and repeatedly until it stays in and the red line is no
longer visible.
• Suction cup is now ready to be used. DO NOT exceed 65 lbs. of lifting or pulling capacity as
serious injury or property damage may occur.
• Release vacuum by pulling up rubber tab at the edge of the Cup.
• Always store with the Rubber Cup nested in the Protective Plastic Base.
EASTWOOD
5" PAINTLESS DENT REMOVAL
SUCTION CUP
INSTRUCTIONS
Part #31608
© Copyright 2017 Easthill Group, Inc. 1/17 Instruction Item #31608Q Rev 1
If you have any questions about the use of this product, please contact
The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com
PDF version of this manual is available online >> eastwood.com/31608manual
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
US and Canada: 800.343.9353 outside US: 610.718.8335
Fax: 610.323.6268 eastwood.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Eastwood 5" Paintless Dent Removal Suction Cup Operating instructions

Brand
Eastwood
Model
5" Paintless Dent Removal Suction Cup
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents