Sanyo ECR 160 User manual

ATTENTION

For

your

protection

in

the event

of

theft

or

loss

of

this product, please fill in the information

requested below.

ModelN~--------------------~

Serial

N~

--------------'--

(Located on the right side

of

the unit)

Date

of

Purchase

________

_

Purchase Price

_________

__

Where Purchased

________

_

This SANYO electronic cash register uses the

keyboard presetting system.

This enables its universal use whether

or

not

tax

is

required

or

different tax rates.

At the time

of

purchase,

it

is

necessary to

initialize the machine according to the installation

procedures to clear the memory and preset the

required data.

The details

of

the procedures are explained in

a later section.

It

is

recommended that these procedures are

followed carefully.

Contents

Features

..........................

.

Name

of

Components

.................

.

Keyboard

.........................

.

Keys

on

the Keyboard

.................

.

Indicator

..........................

.

Print Symbols

......................

.

Printer Operation

....................

.

Clearing the Memory

..................

.

DATE & Time Setting

.................

.

How

to

Program

.....................

.

Registration Examples

.................

.

Special Registration Examples

............

.

How

to

obtain the Read Total

& the Reset Total

....................

.

Drawer

...........................

.

Alarm buzzer

.......................

.

Suggestions for Using

the

Machine

.........

.

Recommended Practices

...............

.

Guarantee

.........................

.

Specification

.......................

.

1

2

3

4

6

c

6

7

9

14

18

20

21

22

23

24

()

Features

(

1.

2 Departments with

13

totals and 4 item counters.

2.

16

BREAK tax table look up with taxable/non-

taxable department by keyboard programming.

(V.A.T.,% tax, Tax table, Mixed tax table)

3. Built-in clock changes the date and time automati-

cally and also prints on a receipt or journal.

Time can be displayed by a touch

of

key.

4. Front and rear display with clear green fluorescent

multi-tubes.

5. Highly reliable

CMOS

LSI

is

employed to keep

memories over one year by dry batteries.

6. Direct and indirect void function for easy correc-

tion.

Indirect void function can be inhibited by pro-

gramming.

7.

Cash-in-drawer declaration may

be

programmed

as

compulsory.

8. Entry digit limit and single-item function can be

programmed respectively for department keys.

9. Repeat registration with counter displayed and

multiplication entry.

-1-

10. Split tendering between Cash and Charge

11. Non-add print for identification by

#key

12. Machine number

is

programmable.

13. Compulsory drawer feature

is

available

as

an

option.

14. Tax shift and tax exemption key for tax mode

15.

Single and mixed refund operation

16.

Z counter and

12

digits non-resettable grand total

17. No

sale

function with counter for exchange

operation

18.

%key

for% calculation

19.

13

totals: 2 department totals, Net sales total,

taxable total (or

%+

total), Tax total

(or

%-

total), Gross sales total, Cash

total, Charge total, R/ A total,

Pd/Rf

total, Void total, Money in drawer total,

Non-resettable grand total

20. 4 item counters: Sales quantity, Customer counter,

No

sale

counter, Z counter

Name

of

Components

Front

display

.-----Roll

paper for journal

(

Journal protection cover

---7

Rear display

Journal

rewinder

Journal/Receipt

------c

selection switch

Keyboard

Cash till

Ink

ribbon

----Bill

compartment

Journal tape

Drawer

lock key

(

Picture l

Picture 2

-2-

Keyboard

(1)

tax mode

(r

Some

key

names in this manual are

RECEIPT

[}J

[~~]

000

~

§]

abbreviated. The actual key names and

OFF!:!!::]

ON

T

the abbreviations are shown below.

MODE

~~

00~

[o~j

§]

MNTX/TXST

--7

MTX/TST

&::

~~

CD00

~

RECDACCT --* R/A

PDOUT/REF

--7

Pd/Rf

~@]

I

~~

AMT/CASH

--7

AT/CA

0

A

SUBTOTAL

-+' ST

VOID

-*V

CLEAR

-*C

CHARGE --* CH

TAX SHIFT

--7

TSF

(2)

%±mode

Key Switches

[!]

~~~]

RECEIPT

000

~

OFF{![]

ON

There are 4 kinds

of

keys provided

MODE

[I]~

00~

~O~T~

§]

for mode lock. Each key is marked

as

ax:

R, X, Z or Ps on it which means

it

can

~~

CD00

~

§

be used in

that

position.

Besides mode keys, drawer lock

PS

§]@]

[

]~

keys are provided.

0

A

(

'

~~~

(for U.K.)

-3-

Keys on the Keyboard

Numeric keys

Used to enter the quantity and amount

of

the

items purchased as well

as

other numeric values.

Multiplication/Time/% key

1) In REG mode this key

is

used

to

multiply

quantity times the item price.

2) In Ps mode this key is used to set the time.

3)

In

REG mode

to

display the time simply

depress this key.

4) In addition this model has percent calulation

function with this key. (Refer to page 18

.)

Non-adding/No

sale

key

This key

is

a dual purpose key.

1)

To open cash drawer for exchange, depress this

key.

2)

To

enter non-add data such

as

customer

account numbers, enter the number (up to

8

digits) and depress this key.

Void key

To correct the last amount entered on a

depart-

ment key, depress this key.·

To correct an error entered which

was

not

caught immediately after the amount entered into

a department, enter the amount, then depress this

key before the department key.

Received-on-account key

Used to register an amount received.

-4-

Paid out/Refund key

This key is used

to

pay cash

out

of

the drawer.

This key

is

also used

to

record a refund

operation during a transaction.

Oearkey

(

Used

to clear a numeric values entered on the

keyboard before the department key

is

depressed.

Also used

to

clear

an

error condition.

Subtotal key

Depress this key

to

show the amount

of

all

items entered during a transaction. Subtotal

always includes

tax

if

any.

Depressing this key immediately after tax shift

key displays

net

subtotal.

Charge key

To fmalize a charge transaction, merely depress

this key.

When this

key

follows an amount entry, the

amount is subtracted from the previous balance

and the new balance will be displayed.

Tendering more than the amount due

will result

in error.

(

§

Amount tendered & Cash key

[%+]

%+

key

(%

mode)

Index the amount tendered by the customer

via

This key following entry

is

used to register a

this key. The register automatically displays the

manual percentage mark up.

A

correct change and opens the cash drawer.

If

this Without previous entry this key is used to

(

key

is

depressed without any previous entry, the calculate and register a mark-up according

to

transaction

is

finalized and a receipt

is

issued.

preset percentage.

~

Department key

~

%-key

(%mode)

Index an amount first, then depress appropriate This key following entry

is

used to register a

department key for itemizing. In tax mode each manual percentage discount.

department key may be set individually for Without previous entry this key is used for

[o~n

taxable or non-taxable status. Also department 2 discount calculation according

to

preset percent-

can be programmed

as

a discount department.

age.

Entry digit limit and single-item/non single-item

can be programmed

by

department.

GiJ

Half

pence key (U.K. mode)

Used to enter a half pence.

~

Tax shift key (Tax mode)

This key, followed by a department key, causes

[!]

Paper feed key

a temporary shift from a preset taxable depart-

Used to feed the tape forward.

ment

to

a non-taxable department or

vice

versa.

Depressing this key immediately before a tender-

ing

key makes a transaction exempt from a tax.

RECEIPT

Journal/Receipt selection

[~~9]

Manual tax & Taxable subtotal key (Tax mode)

OFF~

ON

switch

By

turning this switch on, the

This key after amount entries

is

used to register

tape

is

automatically fed

to

(

a manual tax.

In

this case the preset tax will be

the cutting position.

cancelled.

Without a previous entry this key is used

to

obtain a taxable subtotal.

-5

Indicator

Print Symbols

T Total

TX

Tax

CA

Cash sales

Amount

Department

Error

Change

Subtotal

Under registration

Discount, Refund

CG

Change due

@

Unit price

#

Non-adding

Fig. 3

CH

Charge sales

·+

Re_ceived

on account

v

Void Paid out/Refund

No

Number

.... No

No sale

%

Percent

****

Zmode

Discount

X mode

+

Mark

up

<>

Subtotal

6

SAMPLE

TAPE

*

1.

00

1.

00

2

1.

50

0005

No

1·80

@

1*

9·00

2

3.

00

2

3.

00 v @

0·66

TX

(7)

14 · 00

CA

@

0 · 84

CG

(9)

11.

18.82

II·

32

9

~~

No

CO

Transaction details

M10456

Item

classified by

department

Symbol

of

taxabl(

Unit price entered--

Quantity

Void

Tax amount

Amount tendered

Change due

(f()l

Date

~D

Time & Machine

number

Receipt number

(

Printer Operation

For opening the journal protection cover, squeeze

top

of

it, and lift

it

up.

1.

Loading

of

Paper Tape

(1} Remove the old roll paper by tearing the paper

( in

half

just behind the printer.

(2}

Advance the remaining paper through the printer

using the (!) key.

(

(3) Install a new roll paper and fold the end

of

paper

as

shown below.

(not

to

fold obliquely}

Fig.

5

(4}

Put the paper in straight between Outer and

Inner paper guides.

o-~

p,"',--o

~

Printer

0

X

Fig. 6

(5) Depress the

[!]

key

to

feed the paper and

put

the paper by hand.

-7-

(6) Insert the folded end into the slit

of

the rewind

shaft. Then fit the ends

of

the rewind shaft into

the upper notches and place

it

over the roll paper.

I

I I

,

___

.J

Printer

Fig. 7

(7}

In order to take

out

the wound paper, take out

the rewind shaft from the paper holder and draw

out

the wound paper horizontally after loosening

it

a little by twisting the shaft.

Wound paper

..

Rewind shaft

Paper stopper

Fig. 8

2.

Replacement

of

the paper

Just before the paper runs out, a coloured part will

appear

to

remind you

that

a new paper roll must

be

inserted.

3. Replacement

of

Ink Ribbon

Remove the ribbon spool from the axis by turning

the spool lever. Insert a new ribbon into the axis

by

turning the spool lever in the same way

as

it

was

removed. Then set the ribbon

as indicated in the

Fig.

9.

Use

heavy dencity ink ribbon.

Axis

bik Ribbon

Spool Lever

Fig. 9

-8-

4. Suggestions for Operation

(1)

Do

not impede the rotation

of

the drum by

pulling the paper

or

inserting foreign object.

(2) Do not lubricate the machine.

(3) In case

of

trouble, consult your dealer.

(4) Do

not

remove the journal protection cover

during operation.

5.

When the paper jam occurs

Do

not

pull the paper

by

force, or keep depressing

the

[!]key.

Pull the paper forward or backward.

If

one or

more pieces

of

paper remain inside, remove them with

tweezers.

When this

is

impossible by the above method, take

off

platen cover and remove paper with tweezers.

Take

off

platen cover from concave part

of

Frame

with tweezers.

Platen

cover

Tweezersn-

____

_......

==1··F<>m<

Fig.

lO

(

Clearing the Memory

At the time

of

purchase

of

this unit, the memory

contents may be

in

a random state. They should be

cleared before using the machine.

Key:

Z or

Ps

key

Position: Z

(

Clearing all totals except non- )

resettable total and reset counter.

Note:

Random

may

be

printed out.

Date & Time Setting

Key:

X,

Z or

Ps

key

Position: X or PS

EX) Date March 25, 1982

cp~~@J~~~

G

1--:

1

tEnter

in order

of

Year, Month and Day.

C t

1

F1:

Prints order

of

Month, Day and Year.

C

0

~

ro

·~2:

Prints order

of

Day, Month and Year.

0

e 3: Prints order

of

Year, Month and Day.

Key:

Ps

key

Position:

PS

Time 13:41

[D~~GJ

0

c=

Enter in 24-hour system.

Once set, the date and time

will

be

printed out on the

receipt and journal every time it

is

issued. ·

9-

How to Program

Read this manual carefully

to

program the

machine to the most preferable set-up according

to your store system.

Key:

Ps

key

Position:

PS

1.

Control Data for Department

I

a:@-

Non-single-item non-taxable

1 - Single-item non-taxable

2

- Non-single-item taxable

[~

. 3 - Single-item taxable

8-

Discount (Dept. 2 only)

(

In

case

of%+, Mode)

a:

0 - Non-single-item

1 - Single-item

b: Entry-limited digits

(1

- 7) 7

(

In

case

of

Discount mode

(a

8), )

Entry

limit digits

are

valid only for

manual amount discount.

2.

Discount Dept. Rate

(Tax

Mode only)

EJDD0~

(0-

99%)

3.

%+,

%-

Rate(%+,%-

Mode only)

Percent ratio can be preset for the

~

and the

~

key.

By

these keys, the percent calculation

is

made on the

figures displayed, also the result

is

accumulated

to

%+

or%-

memory. Manual override

is

available for the

~and

the~

key.

DO~

00~13.!3

~

(0~99%)

4. Machine number & Control code

\0

a:

Machine number

(1

~

9)

b: 3 -

CID compulsory

& Indirect Void

disable

2 -

CID compulsory

1 - Indirect Void

disable

0 - Indirect Void used

5. Tax Program (Tax Mode only)

5-1

Clearing the tax data

@]§]

.

-10-

5-2

Tax control data

EJEJEJEJ§]

Kt

Kz

K3

0:

No tax

0:-

1:V.A.T.

o·

.-

0:-

2: Straight%

0:-

4: Mixed tax

a,

b: Boundary

table

value

8: Tax table

a,

b: Boundary

5-3

Tax rate

000000

(0-

99.999%)

value

K4

0:-

0: 5/4, 1:

t'

2:

.J,

0:5/4,1:

t,

2:

.J,

0: 5/4,

1:

t,

2:

.J,

(

0:-

Note: This item

is

not

necessary

for

no

tax

and

tax

table.

5-4 Tax table (Tax break: 16 step max)

---~

5-5

Issuing the receipt

~

Note: This item

is

not

necessary

for

no

tax,

V.A.T.

and

straight%.

P;\~~G

\!:_}

~

) Turn back to

"REG"

position

PS

(

EXl)

In case

of

No

tax

• IT] (Non-single-item, Non-taxable, 7 digit entry-

limit)

•

[]']

(Single-item, Non-taxable, 5 digit entry-limit)

Operation

{

CD

OFF

~

\

r::{EG

Key:

~~

Position:

Pskey

PS

(

PS

®

GJITJ

11'

'51

~""2'"1

L'.J~~

(Setting the control data

@

~

for each department)

(Clearing tax program)

OFF

1 7

2

15

03·25·82

13·42

0

0000

No

****

TX

03·25·82

13·43

0

0000

No

r?!:p~~G~

\t_j-_

} Turn back to

"REG"

position

-11-

EX2) In case

of

straight % tax

• tax ratio

5%,

5/4

•

ITl

(Non-single-item, Taxable, 6 digit entry-limit)

•

[]']

(Single-item, Non-taxable, 3 digit entry-limit)

Operation

CD

OFF

RE~\

Key:

Ps

key

&~~Position:

PS

®

~~ITJ

GJ~[]']

(Setting the control data for each department)

@

@J

~ (Clearing tax program)

®

~[QJ[QJ[QJ

~

~[QJ[QJ[QJ

0 (5% X 1000)

®~

~

1

26

2

13

03·25·82

13·45

0

0000

No

****

TX

2000

TX

5·000%

03·25·82

13·45

0

0000

No

(])

OFF

RE~

0

~

Turn back to

"REG"

position

PS

EX3) In case

of

tax table

6%

SALES

TAX

SALES

TAX

SALES

TAX

SALES

O.OD-0.10

0.00

1.09~1.24

om

2.09~2.24

0.13

3.09~3.24

0.11~0.22

0.01

1.25~1.41

0.08

2.25~2.41

0.14

3.25~3.41

0.23~0.39

om

1.42~1.58

0.09

2.42~2.58

0.15

3.45~3.58

OA0-056

om

1.59~1.74

0.10

2.59~2.74

0.16

3.59~3.74

0.57~0.73

0.04

1.75~1.91

0.11

2.75~2.91

0.17

3.75~3.91

o:74~0.90

0.05

1.92~2.08

0.12

2.92~3.08

0.18

3.il2~4.08

0.91~1.08

0.06

Irre ular area - -

Re

ular area g g

Note:

Boundary value

is

the

first

tax value

of

the

regular area.

In this case 07

•

ITJ

(Single-item-:faxable, 5 digit entry-limit)

•

~

(Non-single-item, Non-taxable, 5 digit entry

limit)

Operation

CD

OFF

REG\

Key:

&~

~Position:

P!i

®

@]@]IT]

Ps

key

PS

TAX

0.19

0.20

0.21

0.22

0.23

0.24

@]

~

(Setting the control data for each department)

®

(Clearing tax program)

® Presetting the tax table

35

2

5

[D[D[ml.

03·25·82

~~~

13·47

0

~~lml

0000

No

~~lml

Irregular area

0~~

~[D[ml

****

TX

8070

TX

~~~lml

0 ·

11

TX

~~~lml

0 ·

23

TX

~~~lml

0 ·

40

TX

CD~~Iml

Regular area

0 ·

57TX

0·74TX

~~~lml

0 ·

91

TX

CD~~Iml

1 · 0 9

TX

~~~lml

1 ·

25

TX

1 · 42

TX

1

·59

TX

cv~

1 ·

75

TX

CA

1 ·

92

TX

2 · 09

TX

03·25·82

®

~m

13·48

0

Turn back to

"REG"

0000

No

position

'

-12

~

EX4) In case

of

mixed tax table 5.3%

Tax computation

of

regular area depends

on%

(5/4)

calculation.

SALES

TAX

SALES

TAX

SALES

TAX

SALES

0.00-0.10

0.00

2.17-2.35

0.12

4.44-

4.62

0.24

6.70-

6.88

0.11-0.24

0.01

2.36-

2.54

0.13

4.63-

4.81

0.25

6.89-

7.07

0.25-

0.45

002

2.55-

2.73

0.14

4.82-4.99

0.26

7.08-

7.26

0.46-0.64

0.03

2.74-

2.92 0.15

5.00-5.18

0.27

7.27-

7.45

0.65-

0.83 0.04

2.93-

3.11

0.16

5.19-5.37

0.28

7.46-

7.64

0.84-

1.02

0.05

3.12-

3.30

0.17

5.38-5.56

0.29

7.65-

7.83

1.03-

1.2 I

0.06

3.3I-

3.49

O.I8

5.57-

5.75

0.30

7.84-

8.0I

1.22-

I .40

0.07

3.50-

3.67

0. I9

5.76-

5.94

0.31

8 02 - 8.20

I

.41

-

!.59

0.08

3.68-3.86

0.20

5.95-

6.I3

0.32

8.2I

-8.39

1.60-

1.78 0.09

3.87-4.05

0.2I

6.I4-

6.32 0.33

8.40-8.58

1.79-1.97

0.10

4.06-

4.24

0.22 6.33 - 6.50

0.34

8.59-

8.77

1.98-2.16

0.11

4.25 - 4.43 0.23

6.51 - 6.69

0.35

8.78-

8.96

Irregular

Area+

Regular Area(% tax:

5/4)

Note:

Boundary

value

is

the

first

tax value

of

the

regular

area(%

tax).

In this case 12

•

ITJ

(Non-single-item, Taxable, 7 digit entry-limit)

• IT] (Non-single-item, Non-taxable, 7 digit entry-

limit)

Operation

(D

OFF

J

r::-\.EG

Key:

(

~~

Position:

PS

®

0[2JITJ

Pskey

PS

TAX

0.36

0.37

0.38

0.39

0.40

0.4I

0.42

0.43

0.44

0.45

0.46

0.47

[2]

[!](Setting the control data for each department)

-13-

®

@]

~

(Clearing tax program)

®

~GJ0~

~

~@]~~

GJ

(5

.3%

X 1000)

® Presetting the tax table

[DC!]~

0~~

~~~

GJ~@]~

Irregular area

GJ00~

GJ~GJ~

GJ~~~

GJ[2]~~

GJ~~~

0

GJ

[2]

~

} Regular area

27

2 7

03·25·82

13·52

0

0000

No

****

TX

41

2 0

TX

5·300%

0 ·

11

TX

0·25TX

0 · 46

TX

0·65TX

0 · 84

TX

1 ·

03

TX

1 · 22

TX

1 ·

41

TX

1 ·

60

TX

1 · 7 9

TX

1 · 9 8

TX

2.

17

03·25·82

13·53

0

0000

No

®

?;);_E~z:

\.f.J-:

) Turn back

to

"REG"

position

PS

EX5)

In

case

of

V.A.T. (value-added tax)

Tax rate

6%

(5/4)

V.A.T. tax

rate=

1

+

0

_

06

x 100 5.66%

• w (Non-single-item, Taxable, 5 digit entry-limit)

•

(!]

(Single-item, Non-taxable, 7 digit entry-limit)

Operation

CD

OFF

?\

REG Key:

&~

Position:

PS

®

[!)~w

Pskey

PS

[!][i)eg] (Setting the control data

for each department)

®

I~

01i:J

(Clearing tax program)

[!]~~~

§]

·25·82

10·27

0

0000

No

****

TX

IOOOTX

5.

660%

03·25·82

I 0 • 27 0

0000

No

~[!][!]~

0 (V.A.T. tax rate5.66% x 1000)

C'D

?5;\~z:

~

) Turn back to

"REG"

position

PS

14-

Registration Examples

The receipts below are examples

of

the

following program.

Key:

R,

X,

Z or

Ps

key

Position: REG

• Tax rate

5%,

5/4, Machine number 5

• w (Non-single-item, Taxable, 6 digit entry-

limit)

• w (Single-item, Non-taxable, 3 digit entry-

limit)

(

1. Cash sale

I*

I·

00

(l)

100 w

(2) 200

l1l

(3)

~

2

2·00

0·05TX

3 ·

05

CA

~

03·25·82

4.

31

5

0 0 1

No

~~

(

Note:

If

non-single item department

is

,.,,..,;~t<>r<>n

first, the department programmed

as

single

item

will

shift

to

non-single item temporarily

for

that receipt.

2. Cash with Change

(1) 100

(2) 200

(3) 300

(

(4)

:S)

1000

3. Repeat

(1)

100

(2)

(3)

-z_

(4)

(5)

4. Multiplication

iJ)

5

(

~2)

60

(3)

~

(4)

~

ERR

~;~

2

2·00

'*

3·00

0 ·

20

TX

lO·OOCA

3 · 80

CG

03·25·82

14·34

5

0002

No

~V'~/\

~

'*

I·

00

'*

I·

00

0

·I

0

TX

2 · I 0

CA

03·25·82

14·35

5

0003

No

0005

No

0·

60@

1*

3·00

0 ·

15

TX

3 •

15

CA

03·25·82

14·35

5

0004

No

5. Single Item

(1) 100

6. Charge sale

(I)

10000

(2)

7. Split tendering

-15-

(1) 1200

(2) 500

(3) 500

(4) 500

1

~;;~~~~0~

0 ·

60

TX

12

·

60

T

5

·

00

CA

' 5 • 0 0

CH

5 ·

00

CA

2 •

40

CG

03·25·82

14·37

s

~~~

8. Non-Adding

(1)

123[JJ

(2) 500

11]

(3)

~

9. Tax Shift

(1) 100

(2) 200

(3)

10. Manual

Tax

10-1

Amount Manual Tax

(1) 230

(2) 320

(3) 120

(4)

(Taxable sub-total will

b~

shown on the display.)

(5)

10

(6)

00000123 #

1*

5·00

0 •

25

TX

5 ·

25

CA

03·25·82

14·38

5

0008

No

~;;!

2*

2-o~

I

0 ·1 0

TX

3

·1

0

CA

03·25·82

14·39

lJ

0009

No

.r<./">.J"V'./'V'./'1,/'>o.

1*

2·30

2

3·20

1 *

1.

20

*

3.

50

0

0 · 1 0

TX

6 · 8 0

CA

03·25·82

14·39

5

0010

No

1().2

%Manual Tax

(1) 100

ITl

(2) 200 w

(3) 400

ITl

(4)

(5)

(3%)

(6)

(7)

11. Last

Item

Void

(1) 100

(2)

(3) 20

(4) 30

(5)

(6) 20

(7) 30

(8)

12. Prior

Item

Void

-16-

(1) 100

ITl

(2) 200

(3)

50

(4) 100

(5)

(6)

I*

I·

00

1*

I·

00

V

0020

No

0·30@

2

6·00

2

6.

00

v

0020

No

0

·30@

I*

6 ·

00

0 • 30

TX

6 ·

30

CA

03·25·82

14·40

5

0012

No

1 * 1.

00

2

2·00

1*

4·00

*

5·00

0 •

15

TX

7 •

15

CA

03·25·82(

14·40

~

I

0011~

~~~J

1 *

1.

00

2

2·00

1*

0·50

1*

1.

00 v

0.

03)1

2·

53\_

03·25·82J

14·40

5

0013

No

~v

13. Tax Exemption

(1)

100 w

(2)

[T!l

(3) ~

(

14. Mix Refund

(1) 100

('!]

(2) 200

(3) 300 w

(4) 50!%]

(5) 100

['g'J

(6)

[~

15. Paid

Out

( (1) 100

I*

I·

00

0 ·

00

TX

I •

00

CA

1 *

1.

00

2

2·00

1*

3·00

0·50

2

1.

00

0·20TX

6 •

70

CA

03·25·82

14·44

5

0015

No

1.

03·25·

14·44

5

0015

No

16. Received on Account

(I)

10000

~

17. No Sale

(1)

~

-17-

100·;~

03·25·82

i

14·46

5J

1

0015

No

~

0001

····No

03·25·82

14·46

5

0015

No

Special Registration Examples

~EG

~;

PS

1. Discount

Key: R,

X,

Z or

Pskey

Position:

REG

• Tax rate 5/4

• Discount dept. rate

10%

• (Non-single-item, Taxable,

5 digit entry-limit)

• (Discount)

1-1

Net Discount (Fixed%)

(1)

100

(2) 200

(3)

(Recall net)

(1

0%

recall)

(Discount)

(4)

(5)

(6)

(7)

1-2

Net Discount

(Override%)

(1)

100

(2)

(3) (Recall net)

( 4)

20 0 (20%)

(5) (Discount)

(6)

(7)

I·

00

2·00

3·000

10%

0·30-

0

·14

TX

2 •

84

CA

03·25·82

15

· 0 I 5

0001

No

I*

I·

00

I*

2·00

3·000

20%

0

·60-

0 •

12

TX

2

·52

CA

03·25·82

15.01

5

0002

No

1-3

Item Discount

(l)

100 w

(2) 200 w

(3) (10% recall)

(4) (Discount)

(5)

~

2.

V.A.T.

• Tax rate

6%

(5/4)

• V.A.T. tax rate 5.66%

•

['1"]

(Non-single-item, Taxable,

5 digit entry-limit)

•

['l!'J

(Single-item, Non-taxable,

7 digit entry limit)

(l)

1

oooo

~V'1

(2) 2000 [!]

(3)

~

3.

%+,

%-

(%+,%-Mode)

18-

• %+rate

15%

•

%-rate

15%

• w (Non-single-item,

5 digit entry-limit)

• [!] (Single-item,

5 digit entry-limit)

1*

100·00

2

20·00

5 •

66

TX

120·00CA

03·25·82

15.07

5

0004

No

(

Page is loading ...

Sanyo ECR 160 User manual

Sanyo ECR 160 User manual

Related papers

Other documents