Miele 11WF0605USA Quick start guide
- Category
- Washing machines
- Type
- Quick start guide
This manual is also suitable for
Miele 11WF0605USA is a washing machine that offers a wide range of features to make your laundry experience more convenient and efficient. With its intuitive control panel, you can easily select the right program for your laundry, and the machine will automatically adjust the water temperature, spin speed, and wash duration accordingly. The machine also features a variety of extra options, such as pre-wash, soak, and rinse plus, which allow you to customize the wash cycle to meet your specific needs.
Miele 11WF0605USA is a washing machine that offers a wide range of features to make your laundry experience more convenient and efficient. With its intuitive control panel, you can easily select the right program for your laundry, and the machine will automatically adjust the water temperature, spin speed, and wash duration accordingly. The machine also features a variety of extra options, such as pre-wash, soak, and rinse plus, which allow you to customize the wash cycle to meet your specific needs.
WWF 060 en - US M.-Nr. 10 669 380/01
Operation
Washing Extra options
OPERATION
WASHING
ADDING DETERGENT
Initial commissioning
Adding detergent
ɉBefore using the machine for the first
time, ensure that it is correctly installed
and connected.
Please read the separate Operating
Instructions supplied with the appliance
ɉFailure to remove the shipping struts
can result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the shipping struts as described
in "Installation".
Switching on the washing machine
ĺ Turn the program selector to the Normal
program.
The welcome tone will sound and the
welcome screen will light up.
The display will now guide you through the
initial commissioning, which is divided into
5steps.
For further information please refer to the
separate Operating Instructions supplied.
Operating the sensor buttons
The sensor buttons react to fingertip
contact. Selection is possible as long as
the respective sensor button is illuminated
If a sensor button is brightly lit, this means:
currently selected
If a sensor button is dimly lit, this means:
selection possible
1. Preparing the laundry
ĺ Empty all pockets.
ɉForeign objects (e.g. nails,
coins, paper clips, etc.) can
cause damage to garments and
components in the machine.
ĺ Sort the laundry by color and by care label. Most
garments have a textile care label in the collar or side
seam.
ĺ Pre-treat stains and badly soiled areas (see the booklet
"Miele's guide to laundry care").
2. Selecting a program
ĺ Turn the program selector to a program.
The interior drum lighting will come on.
Program selection
There are three possible ways to select a program:
1. Selecting the standard programs with the program
selector dial
ĺ Turn the program selector to the required program.
The selected program will be shown in the display. This
will then be replaced by the standard display.
2. Selecting additional programs by setting the
program selector to the "More programs/"
position and the display.
ĺ Turn the program selector to the More programs/
position.
The display shows: Table Linens/Drapes
ĺ Touch the sensor buttons until the program you want
appears in the display.
ĺ Confirm the program with the OK sensor button.
3. Selecting the programs via the MobileControl
program selector position and the Miele@mobile app
ĺ Turn the program selector to the MobileControl
position.
ĺ Touch the "Start⁄Stop" sensor button.
The washing machine can now be operated via a mobile
device together with the Miele@mobile app.
3. Loading the washing machine
Check the drum for pets or foreign objects before
loading it with laundry.
Opening the door
ĺ Take hold of the door and pull
it open.
ĺ Loosely load the laundry in the
drum.
Closing the door
ĺ Make sure that no items are
caught between the door and
the seal.
ĺ Shut the door.
4. Selecting program settings
Selecting a temperature/spin speed
ĺ Touch the sensor buttons above or below the
temperature or spin speed value in the display until
the temperature/spin speed you want appears in the
display. Confirm with the OK sensor button.
Selecting an extra option
There are two ways of selecting extras.
1. Directly above the sensor buttons
ĺ Touch the sensor button for the desired extra. It then
lights up brightly.
2. Via the Extras sensor button and the display
ĺ Touch the Extras sensor button.
The following appears in the display: No Extra
ĺ Touch the sensor buttons until the extra you want
appears in the display and confirm this with the OK
sensor button.
EcoFeedback
You can use the sensor button to view
an energy and water consumption forecast
for the selected wash program.
ĺ Touch the sensor button.
The estimated energy and water
consumption levels will be displayed as a
bar chart.
Level of soiling
You can specify the level of soiling of the
load.
– lightly soiled
No visible soiling or stains
– normal
Visibly dirty and / or just a few slight
stains
– heavily soiled
Soiling and/or stains clearly visible. Pre-
wash starts automatically.
Delay start/SmartStart
Delay start
With the delay start function, you can delay
the start of the program. The start of the
program can be delayed from 15 minutes
up to a maximum of 24 hours.
SmartStart
With the SmartStart function you can define
a time period during which your washing
machine will be started automatically by a
signal.
6. Starting the program
- End of the program
Starting a program
ĺ Touch the flashing Start/Stop sensor
button.
The door will lock (will appear in the display
to show this) and the wash program will
start.
Program end
The door is still locked during the Anti-
crease phase and the following will appear
alternately in the display:
End / Anti-crease
and
Press Start / Stop
ĺ Touch the Start/Stop sensor button. The
door will be unlocked.
ĺ Pull open the door.
ĺ Remove the laundry.
Check that all items have been removed
from the drum.
ĺ Check the folds
in the door seal
for any small
articles. Leave
the door slightly
open to allow the
drum to dry.
ĺ Turn the program selector to the
position. This switches the washing
machine off.
ĺ If applicable, remove the used capsule
from the detergent dispenser drawer.
Leave the detergent dispenser drawer
slightly open to allow it to dry.
Extra options
You can supplement the wash programs
with extra options.
SoftSteam
In order to reduce creasing, the laundry
undergoes a smoothing process at
the end of the program. Reducing the
maximum load by 50% will give a better
result. Please note the load information
in the display. Small loads give a better
result.
Without
SoftSteam
With
SoftSteam
Full load
Half load
Half load
Small load
Small load
Very small
load
The garments must be suitable for drying
in a tumble dryer and suitable for
ironing .
Buzzer
A buzzer sounds at the end of the
program. The buzzer will sound until the
washing machine is switched off.
Pre-wash
For laundry with large amounts of dirt,
e.g., dust and sand.
Pre-wash and Bleach are not possible.
The bleach is added too early.
Only liquid detergent may be added to
the chamber of the detergent
dispenser drawer.
Powder detergent clogs up the chamber
and water can escape from the
detergent dispenser drawer.
Gentle
Drum rotation and wash duration are
reduced. Lightly soiled textiles are washed
more gently.
Rinse plus
An additional rinse cycle can be activated
to give a more thorough wash result.
Soak
For heavily soiled textiles with stains.
A duration of between 30 minutes
and 5 hours can be chosen for the
soak process. See "Settings" for more
information.
The factory default setting is 30 minutes.
Environmentally friendly washing
– Make use of the maximum load of the
respective wash program.
– When smaller amounts of laundry
are washed, the washing machine's
automatic load control system will
reduce the amount of water and energy
used.
– Use the Express program for small,
lightly soiled loads.
– Modern detergents make it possible to
wash at lower temperatures. Using the
corresponding temperature settings will
save energy.
– For precise dispensing, use automatic
detergent dispensing.
– Select the highest possible spin speed
for the wash program to save energy in
the subsequent tumble dryer cycle.
1 Control field
The control field consists of a display
and various sensor buttons.
2 Display
Values are displayed and/or selected in
the display.
3 Sensor buttons
The values in the display can be
changed with the sensor buttons .
4 OK sensor button
Confirm the selected values with the OK
sensor button.
5 Optical interface
for service technicians.
6 Sensor buttons for extras
You can supplement the wash programs
with extra options.
7 Sensor button
You can use the sensor button to
view an energy and water consumption
forecast for the selected wash program.
8 Sensor button
The sensor button starts the delay
start function.
9 Sensor button
For selecting the level of soiling.
10 Start/Stop sensor button
Touching the Start/Stop sensor button
starts the selected program or cancels a
program that has already been started.
11 Sensor button
Activates cap dosing via the detergent
dispenser drawer.
12 Program selector
For selecting programs and for switching
off the machine.
3
1
2
4
1 Detergent dispenser drawer
2 Control panel
3 Drain filters
4 Door
5. Adding detergent
There are several options for adding
detergent to the washing machine.
Detergent dispenser drawer
This washing machine requires
high efficiency (HE) detergent
Ensure that TwinDos dispensing is
deactivated.
ĺ Pull out the
detergent drawer
and add
detergent to the
compartments.
Chlorine bleach for removing
stains or liquid detergent for the
pre-wash
Detergent for the main wash,
including Soak if selected
/
Fabric softener, liquid starch or
capsules
Using chlorine bleach
ɉChlorine bleach is a very aggressive
substance. It can cause damage to the
colors and fibers of textiles. Only use
chlorine bleach on suitable textiles.
Chlorination must be activated in the
settings before chlorine bleach is first used.
Dispensing chlorine bleach
Follow the manufacturer's instructions on
the packaging.
The extra option pre-wash must not be
selected.
ĺ Pour max. ¼ cup (60ml) of chlorine
bleach into the chamber.
The chlorine bleach is added automatically
10minutes before the end of the main
wash.
Using powder detergent
The detergent dispenser drawer contains
an insert for liquid detergent in the
compartment. This insert must be removed
to use powder detergent.
Using powder detergent in the
compartment is not possible.
CapDosing
Three different types of capsule are
available:
Contents:
Fabric care (e.g., fabric softener,
proofing agent)
Additives (e.g., detergent enhancers)
Detergent (for the main wash only)
Each capsule contains the correct amount
for one wash cycle.
Activating CapDosing
ĺ Touch the sensor button.
See "Detergent" in the Operating
Instructions for more information.
en - US M.-Nr. 10 669 380
Program guide Cleaning and care
CLEANING AND CARE
FREQUENTLY ASKED QUESTIONS
Quick Guide
Washer
These short instructions are not a substitute for the Operating Instructions supplied
with the appliance! Please read the Operating Instructions supplied with your washing
machine before using it for the first time and take note of the IMPORTANT SAFETY
INSTRUCTIONS, as well as the full descriptions on how to use your appliance.
Frequently asked questionsDetergent
PROGRAM GUIDE
Cleaning the detergent dispensing
drawer
Washing at low temperatures and the use
of liquid detergent can lead to a build-up
of bacteria in the detergent dispensing
drawer.
ĺ Clean the entire drawer at regular
intervals for hygiene reasons, even if you
are using the TwinDos system exclusively.
ĺ Pull out the
detergent
dispenser drawer
until a resistance
is felt.
ĺ Press down the release button and, at
the same time, pull the drawer completely
out of the machine.
Removing and cleaning the insert for
liquid detergents
An insert for liquid detergents is located in
the compartment of the detergent
dispenser drawer.
ĺ Remove the
insert. Clean the
insert thoroughly
with warm water.
Cleaning the compartment
The compartment has a siphon for
better dispensing of the chlorine bleach.
ĺ Remove the
release catch.
ĺ Remove and
clean the siphon.
ĺ Pull the siphon
out of the
chamber
ĺ Clean all parts and the detergent drawer
with warm water.
Cleaning the detergent dispenser
drawer housing
ĺ Use a bottle brush to remove detergent
residues and limescale from the jets
inside the detergent dispenser drawer
housing.
Cleaning the drum (Hygiene info)
Washing at low temperatures and/or using
liquid detergents can cause bacteria and
odors to build up in the washing machine.
Use the Clean machine program to clean
the washing machine. Note the message in
the display:.
Sanitize info: Run a high temp. program or the
"Clean Machine" program
Miele recommended detergents
The Miele detergents have been developed by Miele especially for the Miele washing
machine. You can order the Miele detergents from Miele's online store.
Programs
Miele
UltraWhite
Miele
UltraColor
Miele
Cap
Miele
Cap
Miele
Cap
Normal
–
Wrinkle-free
–
–
Delicates
–
, , –
Sanitize
–
–
Handwash
– –
, ,
–
Dress Shirts
–
Express
–
– –
Darks/Denims
–
– –
Extra White
–
Outdoor
– –
– –
Table Linens/Drapes
–
Sportswear
– –
– –
Woolens
– –
,
– –
Silks
– –
– –
Proofing
– –
–
–
Separate Rinse
– –
– –
= Recommended; – = Not recommended
= Sportswear; = Downs; = Outdoor, = WoolCare; = SilkCare; = Fabric Softener;
= Proofing; = Booster
Some of the messages in the display are more than one line long. Touch the or sensor
button to read them in full.
Message Cause and solution
The display remains
dark, and the Start/
Stop sensor button
does not light up or
flash.
There is no power to the machine.
ĺ Check whether the plug is plugged in.
ĺ Check whether the fuse has tripped.
The washing machine has switched off automatically to save
energy.
ĺ Turn the program selector to switch the washing machine on
again.
Service Door lock
fault F34
The door is not closed properly. The door lock could not engage.
ĺ Close the door again.
ĺ Start the program again. If the fault message appears again,
contact the Service department.
Water intake. See
The water inlet is blocked or restricted.
ĺ Check whether the water supply is turned on properly.
ĺ Check whether the inlet hose is kinked.
ĺ Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
ĺ Clean the filter (see the Operating Instructions).
Drainage See
The drain is blocked or restricted. The drain hose has been fixed
too high.
ĺ Clean the filter and the pump.
ĺ Check whether the maximum delivery height of 3'3" (1m) has
been exceeded.
Service
Waterproof syst.
The water protection system has reacted.
ĺ Close the water supply.
ĺ Contact Miele Service.
Service. Fault F
There is a fault.
ĺ Disconnect the washing machine from the power supply, either
by unplugging the appliance or disconnecting it at the fuse.
ĺ Wait at least 2 minutes before reconnecting the washing
machine to the power supply
ĺ Then switch the washing machine on again.
ĺ Restart the program.
If the fault message appears again, contact the Service
department.
Service Door release
fault F35
The door lock has jammed.
ĺ Contact the Service department.
Message Cause and solution
Align the washing
machine
The smoothing process which the laundry undergoes at the end of
the program could not be carried out properly.
ĺ Check whether the washing machine is aligned correctly
as described in "Installation and connection – Leveling the
machine".
ĺ Check whether the maximum delivery height of 39" (1 m) has
been exceeded.
If the fault message appears again, contact the Service
department. The washing machine can still be used but with
reduced functionality.
Check dosage
Excessive foam has built up during washing.
ĺ Check the amount of detergent dispensed.
ĺ With automatic detergent dispensing, check the dispensing
quantity set.
ĺ Observe the instructions on the detergent packaging and the
level of soiling on the laundry.
ĺ If necessary, reduce the dispensing quantity by increments of
10%.
Sanitize info: Run a
high temp. program or
the "Clean Machine"
program
A high temperature program has not been run for a long period of
time.
ĺ Using the program selector setting More programs/ select the
'Clean machine' program in the Care submenu.
ĺ Run the 'Clean machine' program using Miele clean machine or
a universal powder detergent.
The washing machine is cleaned which prevents bacteria and odor
buildup.
To switch off the fault messages: Switch the washing machine off with the button.
The messages will appear at the end of the program and when the washing machine is
switched on, and need to be confirmed with the OK sensor button.
Temperature Spin speed Laundry type
Normal Full load (17.6 lb/8kg)
hot +; hot; warm +; warm; cold
Max.; ;
Cotton, linen, and mixed fiber textiles made of both cotton and linen.
Wrinkle-free Half load (8.8 lb/4kg)
hot +; hot; warm +; warm; cold
High; Med; Slow; ;
Synthetic or mixed fiber fabric, or wrinkle-free cotton.
Delicates Small load (6.6 lb/3kg)
hot +; hot; warm +; warm; cold
Med; Slow; .
For fine textiles made from synthetic fibers.
Sanitize Full load (17.6 lb/8kg)
Sanitize
Max.; High; ;
Cotton or linen fabrics with direct skin contact or for which special hygiene
requirements apply.
Handwash Small load (4.4 lb/2kg)
warm+; warm; cold
High; Med; Slow; ;
For fine textiles which are only suitable for hand washing.
Dress Shirts Small load (4.4 lb/2kg)
hot +; hot; warm + ; warm; cold
Med; Slow; ;
Pre-treat collars and cuffs depending on the level of soiling.
Express Half load (7.7lb/3.5kg)
warm +; warm; cold
Max.; High; Med; Slow; ;
Cotton textiles that have hardly been worn or are only very lightly soiled.
Darks/Denims Small load (4.4 lb/2kg)
warm +; warm; cold
High; Med; Slow; ;
Black and dark garments made from cotton, mixed fibers, and denim.
Extra White Full load (17.6 lb/8kg)
hot +
Max.; High; ;
For white textiles made of cotton or linen without special hygiene
requirements.
Outdoor Small load (5.5lb/2.5kg)
warm +; warm; cold
Med; Slow; ;
Performance outerwear (e.g., jackets and trousers) made from membrane
fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®, etc.
Table Linen/Drapes Full load (13.2lb/6kg)
hot +; hot; warm +; warm; cold
High; Med; Slow; ;
Table linen and drapes made of cotton and linen.
Sportswear Half load (6.6lb/3kg)
hot +; hot; warm +; warm; cold
High; Med; Slow; ;
Sportswear such as jerseys and leggings, as well as microfiber and fleece
garments.
Woolens
Small load (4.4 lb/2kg)
warm; cold
High; Med; Slow; ;
Wool or wool-blend textiles.
Silks
Very small load (2.2lb/1kg)
warm; cold
Slow; ;
Silks and other hand-washable textiles with no wool content.
Proofing Small load (5.5lb/2.5kg)
warm +
High; Med; Slow; ;
Treating microfiber fabric, ski wear, or Table Linens made from mainly
synthetic fibers to provide a finish which is resistant to water and dirt.
-
1
-
2
Miele 11WF0605USA Quick start guide
- Category
- Washing machines
- Type
- Quick start guide
- This manual is also suitable for
Miele 11WF0605USA is a washing machine that offers a wide range of features to make your laundry experience more convenient and efficient. With its intuitive control panel, you can easily select the right program for your laundry, and the machine will automatically adjust the water temperature, spin speed, and wash duration accordingly. The machine also features a variety of extra options, such as pre-wash, soak, and rinse plus, which allow you to customize the wash cycle to meet your specific needs.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Miele 10666180 Quick start guide
-
-
-
-
-
-
-
-
-