Toro 137-5580 User manual

Category
Wall & ceiling mounts accessories
Type
User manual

Toro 137-5580 is a wing mount kit compatible with Groundsmaster 4000 Series Rotary Mowers. It allows for precise deck leveling and improved cutting performance, especially on uneven terrain. Installation involves removing the existing deck mount, drilling a 9/16-inch hole in the rear plates of the cutting unit, and mounting the new deck mount. Ensure proper torque specifications for bolts and nuts. Enjoy enhanced mowing efficiency and accuracy with the Toro 137-5580 Wing Mount Kit.

Toro 137-5580 is a wing mount kit compatible with Groundsmaster 4000 Series Rotary Mowers. It allows for precise deck leveling and improved cutting performance, especially on uneven terrain. Installation involves removing the existing deck mount, drilling a 9/16-inch hole in the rear plates of the cutting unit, and mounting the new deck mount. Ensure proper torque specifications for bolts and nuts. Enjoy enhanced mowing efficiency and accuracy with the Toro 137-5580 Wing Mount Kit.

FormNo.3422-333RevA
WingMountKit
Groundsmaster®4000SeriesRotaryMower
ModelNo.137-5580
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
DescriptionQty.Use
NopartsrequiredPreparethemachine.
Deckmount1
Plate1
Springpin1
Spacer2
Bolt(3/4x4-1/2inches)1
Locknut(3/4inch)1
Cabletie1
Installthekit.
Determinetheleftandrightsidesofthemachinefrom
thenormaloperatingposition.
PreparingtheMachine
1.Parkthemachineonalevelsurface.
2.Disengagethepowertakeoffandlowerthe
attachments.
3.Engagetheparkingbrake.
4.Shutofftheengineandremovethekey.
5.Waitforallmovementtostop.
6.Allowmachinecomponentstocool.
©2021—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3422-333*
InstallingtheDeckMount
1.Removethesnapringsonbothsidesofthe
U-jointasshowninFigure3.
2.Removethecapsunderthesnaprings.Thiscan
bedonebyaddingmoregreaseintotheU-joint.
3.Removetheexistinglongbolt(Figure3).
4.Removetheplateandrubbercushion(Figure
3).Discardtheplate.
5.Removetheboltsthatholdthedeckmountto
thecuttingunit(Figure3).
6.Removethebolt,locknut,andspacersthat
securethehydrauliccylindertothedeck
mount.Discardthehardwareandexistingdeck
mount(Figure3).
g367529
Figure1
1.Existingdeckmount6.Locknut(3/4inch)
2.Longbolt7.Bolt(3/4x4-1/2inches)
3.Snapring8.Bolt
4.Plate9.Lockwasher
5.Rubbercushion10.Washer
7.Usingthenewdeckmountasatemplate,locate
anddrilla9/16inchholeintotherearplateson
thecuttingunitasshowninFigure2.
g365598
Figure2
1.102mm(4inches)3.Drilla9/16inchhole
2.36mm(1-13/32inches)4.Deckmount
8.Placethenewdeckmountontothecuttingunit.
9.Installtheboltsthatsecurethedeckmountto
thecuttingunit(Figure3andFigure4);torque
to102N∙m(75ft-lb).
2
g365599
Figure3
1.Springpin7.Spacer
2.Snapring8.Bolt(3/4x4-1/2inches)
3.Rubbercushion9.Bolt
4.Plate10.Lockwasher
5.Deckmount11.Washer
6.Locknut(3/4inch)
g365601
Figure4
1.Installeddeckmount
10.InstalltheU-jointcapsandsecurethemwiththe
previouslyremovedsnaprings(Figure3).
11.Installthehydrauliccylindertothedeckmount
withabolt(3/4x4-1/2inches),locknut(3/4
inch),andspacers(Figure3);torqueto136N∙m
(100ft-lb).
12.Installthecabletie(Figure5).
g365600
Figure5
1.Cabletie
13.Startthemachineandchecktheoperationof
thecuttingunit.Ensurenohosesrubagainst
themachineandifneeded,adjustthehoses.
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Toro 137-5580 User manual

Category
Wall & ceiling mounts accessories
Type
User manual

Toro 137-5580 is a wing mount kit compatible with Groundsmaster 4000 Series Rotary Mowers. It allows for precise deck leveling and improved cutting performance, especially on uneven terrain. Installation involves removing the existing deck mount, drilling a 9/16-inch hole in the rear plates of the cutting unit, and mounting the new deck mount. Ensure proper torque specifications for bolts and nuts. Enjoy enhanced mowing efficiency and accuracy with the Toro 137-5580 Wing Mount Kit.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI