2. Apollo
  3. Stainless Steel Push Button Switches and Selector Switch
Stainless Steel Push Button Switches and Selector Switch

Apollo Stainless Steel Push Button Switches and Selector Switch User manual

  • Hello! I've reviewed the wiring instructions for the MEGA LED Stainless Steel Push Button Switches and Selector Switches. This document details the wiring setup, including the connections for the LED illumination and switch actuation. It also specifies the maximum current and voltage it operates on. I'm ready to assist you with any questions you have about the content.
  • What is the maximum switched current for these switches?
    What kind of actuation options are available?
    What voltage is required for the LED illumination?
MEGA LED
European
Quality
Wiring Instructions
Stainless Steel Push Button Switches & Selector Switch
• Maximum 5A switched
current.
• Momentary or latched
actuation options
available.
• Dedicated with 12 or
24VDC LED illumination.
LED(+)
Common
LED(-)
Normally Close
Normally Open
Switch
Normally
Open
Minus (-)
-
+
Common
• The LED (+) & LED (-) are
for the illumination ring
which is for 12 or 24VDC
depending the model.
MEGA LED
European
Quality
Wiring Instructions
Stainless Steel Push Button Switches & Selector Switch
• Maximum 5A switched
current.
• Momentary or latched
actuation options
available.
• Dedicated with 12 or
24VDC LED illumination.
LED(+)
Common
LED(-)
Normally Close
Normally Open
Switch
Normally
Open
Minus (-)
-
+
Common
• The LED (+) & LED (-) are
for the illumination ring
which is for 12 or 24VDC
depending the model.
MEGA LED
European
Quality
Wiring Instructions
Stainless Steel Push Button Switches & Selector Switch
• Maximum 5A switched
current.
• Momentary or latched
actuation options
available.
• Dedicated with 12 or
24VDC LED illumination.
LED(+)
Common
LED(-)
Normally Close
Normally Open
Switch
Normally
Open
Minus (-)
-
+
Common
• The LED (+) & LED (-) are
for the illumination ring
which is for 12 or 24VDC
depending the model.
/