2. Garnet Instruments
  3. 709-2P
709-2P

Garnet Instruments 709-2P Installation guide

  • Hello! I've reviewed the wiring diagram for the SeeLevel 709-2P. It details how to connect the pump switch, senders, and a 3-way switch, including important safety information on fuse and relay requirements. I'm ready to answer your questions about it.
  • What is the maximum fuse rating for the power circuits?
    When is a relay required?
    What does the white wire connect to?
TM
Display
Double Stacked
Sender
Black
Sender
Fresh
Sender
Black Ground
Blue Sender
Ground
709-2P Wiring Diagram
Red wire
+12V power
input to monitor
Pump LED white wire
connects to the pump
side of all switches
Pump Switch
Connector
(see diagram
below)
W WARNING: All power circuits must be fused.
If a fuse is not provided with the system then it is the
installer’s responsibility to install a fuse with the
maximum rating of 7.5 amps. A relay is required if
more than 7.5 amps needed for the pump.
709
SWITCH
EXISTING
BATHROOM
+12V
PUMP
LED
3-WAY SWITCH WIRING DIAGRAM
WHITE WIRE
PUMP
+12V
GROUND
/