V I V O MOUNT-POLEKB User manual

Brand: V I V O

Model: MOUNT-POLEKB

Type: User manual

Scan the QR code with your mobile device or follow the link

for helpful videos and specications related to this product.

Instruction Manual

https://vivo-us.com/products/mount-polekb

SKU: MOUNT-POLEKB

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation,

please call a qualied technician. Check carefully to make sure there are no missing or defective parts.

Improper installation may cause damage or serious injury. Do not use this product for any purpose that is

not explicitly specied in this manual. Do not exceed weight capacity. We cannot be liable for damage or

injury caused by improper mounting, incorrect assembly or inappropriate use.

2.2lbs

(1kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

A (x1)

Arm

S-A (x4)

M4x8mm Screw

S-B (x4)

M4x12mm Screw

NOTE: SOME HARDWARE MAY NOT BE USED

Phillips

Screwdriver

B (x1)

Right Tray

C (x1)

Le Tray

D (x1)

Connecting Plate

E (x1)

Mouse Pad

F (x1)

Wrist Pad

G (x1)

Cable Clip

S-C (x4)

M4 Nut

S-D (x2)

M8x70mm Screw

T-A (x1)

6mm Allen Wrench

T-B (x1)

Wrench

TOOLS NEEDED

ASSEMBLY STEPS

STEP 1 (Option A)

28mm-45mm Diameter Poles

Loosen the bolts on Arm (A) using 6mm Allen Wrench (T-A) and slide onto the pole.

Tighten bolts using 6mm Allen Wrench (T-A). Apply Cable Clip (G) to Arm (A).

T-A

STEP 1 (Option B)

46mm-60mm Diameter Poles

For pole sizes larger than 45mm, swap pre-installed bolts (A1) with M8x70mm Screws (S-D) using 6mm

Allen Wrench (T-A) and slide Arm (A) onto the pole.

Tighten M8x70mm Screws (S-D) using 6mm Allen Wrench (T-A). Apply Cable Clip (G) to Arm (A).

T-A

S-D

T-A

AA1

STEP 2

Attach Le Tray (C) and Right Tray (B) with Connecting Plate (D) using M4x8mm Screws (S-A) and a

Phillips screwdriver.

S-A

STEP 3

STEP 4

Attach Tray Assembly to Arm (A) using M4x12mm Screws (S-B), M4 Nuts (S-C), Wrench (T-B), and a

Phillips screwdriver.

S-B

S-C

T-B

Remove protective film from Wrist Pad (F) and place onto the front of the tray assembly. Place Mouse

Pad (E) onto the tray assembly.

STEP 5

Adjust the tilt joint with 6mm Allen Wrench (T-A). Route cables through Cable Clip (G), and adjust as

desired.

T-A

LAST UPDATED: 11/17/2022

REV1

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

V I V O MOUNT-POLEKB User manual

V I V O MOUNT-POLEKB User manual

V I V O MOUNT-POLEKB User manual

Related papers

Other documents