Shenzhen Zfx Technology ZP-THP60 User guide

Brand: Shenzhen Zfx Technology

Model: ZP-THP60

Category: Soundbar speakers

Type: User guide

Shenzhen Zfx Technology ZP-THP60 is a versatile pair of wireless headphones offering a range of connectivity options for various audio sources. With a built-in microphone, you can enjoy hands-free calling. Its adaptive design headband ensures a comfortable fit, and the soft ear cushions provide passive noise isolation for an immersive audio experience. The headphones can be charged using the included micro-USB cable or conveniently placed on the charging base station.

PRODUCT INFORMATION GUIDE

ZP-THP60-Gamma4A

PRODUCT OVERVIEW

01. Pogo-pin for charging

Adaptive design headband02.

Mirco USB cable for charging03.

RCA to 3.5mm cable04.

Soft Ear cushion05.

Wireless Transmitter&charging baser06.

Adapter07.

Connect LED indicator（Base station）08.

Charging LED indicator(Base station)09.

Pogo-pin for charging(Headphone)10.

3.5mm input for wired use11.

Bulid-in mic(optional)12.

Micro-USB for charging(Headphone)13.

LED Indicator(Headphone)14.

Volume down15.

Mute16.

17. Power

Volume up18.

Power switch(Base station)19.

PRODUCT OVERVIEW

20. Micro-USB for power

Audio source switch(Optical/3.5mm) 21.

22. 3.5mm input

23. Optical input

1.Use the Micro-USB cable to connect Adapter and

Base station for power up

2.Power up the headphone,and will see the LED

indicator on headphone and Base station turn to

solid Blue

SETUP

3.5mm Audio source

1. Use the RCA to 3.5mm cable connect your

TV(RCA output Jack/headphone jack) to Base

station(3.5mm Input jack)

2. You can also use 3.5mm to 3.5mm cable connect

Mobile/soundBar to Headphone directly

Optical audio source

•U se the OPTICAL cable connect your TV(optical

output) to Base station(optical input)

•S elect the audio output to optical in your TV setup

menu.

1. You can hang the headphone to the base station for charging, make sure

that the headphone and the base are in correct contact, and the charging

indicator light is on. You can also charge the headset to use the micro-USB

cable to the charging port on the headset, and plug the other end into any

USB power source(5V/1A)

2. LED indicator will Red when charging, will off when charging full.

CHARGING

* The headset will turn off automatically when the power exhausted

To power on the headset press and

hold the power button for at least 3

seconds. The LED indicator will Blue.

To power off the headset press and

hold the power button for at least 3

seconds. The LED indicator will off.

POWER ON/OFF

Press and hold the headphone&

Wireless transmitter pairing button

for 3 seconds, you will see the LED

indicator blinking and Turn Blue, the

paring will be done.

The headset is already paired

to the transmitter when it arrives.

PAIRING

• Press and hold the headset microphone mute button for

3 seconds at same time, you will see the LED indicator

blue blinking

• Press and hold the transmitter pairing button for 3 seconds

until the LED indicator blue blinking rapidly

• Pairing will be completed automatically, and there is no

need to pair again for use

RCA AUDIO CABLE

3.5mm TO 3.5mm

CABLE

You can also use the 3.5mm to 3.5mm

cable to connect your mobile to Wireless

transmitter for enjoy wireless audio

OTHER CONNECT FOR WIRELESS AUDIO

NOT INCLUDE

OPTICAL CABLE

NOT INCLUDE

Connect To TV

RCA/3.5mm AUDIO CABLE

Connect To SoundBar/Other Audio equipment

RCA/3.5mm AUDIO CABLE

SOUNDBAR OR OTHER

AUDIO EQUIPMENT

www.zfxtech.cn

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile

configurations. The antennas used for this transmitter must be installed to provide a separation di

stance of at least 20cm from all persons and must not be co-located or operating in conjunction

with any other antenna or transmitter.

Shenzhen Zfx Technology ZP-THP60 User guide

Brand: Shenzhen Zfx Technology

Model: ZP-THP60

Category: Soundbar speakers

Type: User guide

Download PDF

report

Shenzhen Zfx Technology ZP-THP60 User guide

Shenzhen Zfx Technology ZP-THP60 User guide

Other documents