Aiwa MI-X 30 User manual

Category
Portable speakers
Type
User manual

Aiwa MI-X 30: Experience exceptional sound with powerful 2 X 5W speakers, delivering clear audio from 150Hz to 15kHz. Enjoy up to 15 hours of music with a single charge, and conveniently charge the speaker using the included Type-C cable. Connect via Bluetooth 5.0 for seamless wireless music streaming or use the 3.5mm AUX input for a wired connection. The IPX5 rating ensures protection against water splashes, making it perfect for outdoor adventures. Explore more at www.int-aiwa.com

Aiwa MI-X 30: Experience exceptional sound with powerful 2 X 5W speakers, delivering clear audio from 150Hz to 15kHz. Enjoy up to 15 hours of music with a single charge, and conveniently charge the speaker using the included Type-C cable. Connect via Bluetooth 5.0 for seamless wireless music streaming or use the 3.5mm AUX input for a wired connection. The IPX5 rating ensures protection against water splashes, making it perfect for outdoor adventures. Explore more at www.int-aiwa.com

Important Safety Instructions Product Specifications Product OverviewUnboxing
Please do not place device near any form of heat sources.
Please use the accessories specified by the manufacturer.
Please refer all servicing/repairs to a qualified personnel should there by any form
of damage to the device.
Keep this user manual for future referencing/ troubleshooting.
Please heed ALL safety cautions.
1.
2.
3.
4.
5.
Safety Cautions
Always keep device AWAY from fire and heat sources.
Do NOT attempt to disassemble or alter the device.
Do NOT expose device to excessive heat (Direct sunlight etc.).
Do NOT immerse device into any form of liquids.
1.
2.
3.
4.
MI-X 30 KATANA X
User Manual
Developed in Japan
Aiwa Electronics Int'l Co., Ltd.
- AIWA MI-X30 KATANA X Speaker
- Type-C Charging Cable
- 3.5mm AUX Cable
- User Manual
Audio Related
Frequency Response: 150Hz - 15kHz
Signal to Noise Ratio: ≥70dB
Drivers: 2 x 53mm (4Ω)
Power & Battery
Power Output: 2 X 5W
Playback Time: 4-15 Hours (Varies by volume level & content)
Charging Time: 5 Hours
Charging Current: DC 5V /500mA Type C
Battery: Built In Lithium Ion (3.6V / 2000mAh)
Transmission Standards
BT Version: V5.0
BT Profile: A2DP V1.2; AVRCP V1.4 GAVDP V1.2 V1.2; SPP V1.2; AVCTPV1.2
Physical Dimensions
Size: 190.2 *78.1*58.5 mm
Weight: 650g
Other Attributes
IP Rating: IPX5
Protected against low pressure water streams from any angle, please DO NOT
submerge the speaker in any liquids.
Please ensure all exposed ports are sealed & all cable connections are removed
before any form of liquid exposure.
Please refrain from using any damaged components. Contact your local authorized AIWA
distributor/customer service should you need any assistance.
The above playback & charging times are estimated values tested in a practical environment and
may vary upon individual usage habits.
Connecting the Product Battery & ChargingListening to music from external audio source
TWS Function
MI-X30 automatically reconnects to the last paired mobile device it was connected to.
MI-X30 saves up to 8 paired devices.
Synced audio playback from two (2) speakers for true wireless stereo experience.
(Only compatible with the same speaker model: MI-X30 Katana X)
1. Turn on both speakers.
2. Double Click Power button on BOTH speakers until a notification prompt beep is
heard.
3. Connect to one of the speakers via BT on your mobile device.
4. TWS (True Wireless Stereo) playback is now available.
Connect the speaker to a suitable power source via the Type-C Charging Cable.
LED Indicator Light:
*Blinks RED: Low Battery (< 10 %)
*Solid RED: Charging in progress
*RED Light extinguishes upon full charge
Approximate charging time: 5 Hours
Please fully charge up the speaker prior to first time usage.
Perform Factory Reset
1. Turn on the speaker.
2. Insert a pin ( < 3mm Φ ) into the reset hole button for two (2) seconds until the LED
Indicator light turns off.
USB Playback
Insert USB Disk into the designated port. (Supports MP3, WAV, APE, FLAC, WMA)
AUX-IN
Connect speaker and Audio source via a 3.5mm AUX Cable.
Note: Under Aux – In Mode, Next track/Previous track/Call Control functions are not
available.
Micro SD Playback
Insert Micro-SD card into the designated port. (Supports MP3, WAV, APE, FLAC,
WMA)
Turn on Bluetooth (BT) on your mobile device.
Turn on the speaker.
Search and connect to “AIWA Katana X” from your mobile device.
Press and hold both “Volume Up +” & “Volume Down – “ button to disconnect BT.
1.
2.
3.
4.
Paired device
Pairable devices
AIWA Katana X
AIWA Katana X
ON/OFF ON/OFF
Paired device
Pairable devices
Aiwa Electronics Int'l Co., Ltd.
Explore more at www.int-aiwa.com
Volume Down (Click Once)
Previous Song (Press and Hold)
Volume Up (Click Once)
Next Song (Press and Hold)
LED Indicator Light
USB Port
Charging port
Micro SD Port Reset Buon
Aux - In
Play/Pause
(Click Once)
Call Control
(Answer/ End Call: Click Once)
(Reject Call: Press and Hold)
(Re-dial last number: Press and Hold)
Mute (Click Once)
Mute function is only available during AUX
Playback mode.
Power ON/ OFF (Press and hold)
Switch BT to AUX-In Mode (Click Once)
  • Page 1 1

Aiwa MI-X 30 User manual

Category
Portable speakers
Type
User manual

Aiwa MI-X 30: Experience exceptional sound with powerful 2 X 5W speakers, delivering clear audio from 150Hz to 15kHz. Enjoy up to 15 hours of music with a single charge, and conveniently charge the speaker using the included Type-C cable. Connect via Bluetooth 5.0 for seamless wireless music streaming or use the 3.5mm AUX input for a wired connection. The IPX5 rating ensures protection against water splashes, making it perfect for outdoor adventures. Explore more at www.int-aiwa.com

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI