polyga HDI User guide

Hello, I've reviewed the user guide for the HDI Compact USB 3D scanner. This guide outlines how to get started with your device, including instructions for software download, initial hardware setup, and adding the scanner to the FlexScan3D application. I'm ready to answer your questions about the setup process or the device itself.
Where can I download FlexScan3D software?

How do I connect my scanner?

How do I add my scanner in FlexScan3D?

HDI COMPACT USB

QUICK START GUIDE

For more information visit www.polyga.com/gs

Got questions? Contact support@polyga.com

DOWNLOAD FLEXSCAN3D

https://www.polyga.com/my-account/

to download and install FlexScan3D.

CONNECT YOUR SCANNER

Plug in the power (12 VDC) and the USB cable

into the scanner and your computer.

Turn the scanner on.

ADD YOUR SCANNER

Start FlexScan3D.

Under the Scanners tab, select New to add a

scanner.

Select your Scanner Type and click OK.

Select the Project tab to begin scanning.

NOTE: Always power down the scanner before removing cables from the scanner.