Pro-Ject Debut Carbon RecordMaster HiRes Installation guide

Debut Carbon RecordMaster HiRes
Pro-Ject
Brand
Pro-Ject
Model
Debut Carbon RecordMaster HiRes
Category
Turntable
Type
Installation guide

This manual is also suitable for

Pro-Ject Debut Carbon RecordMaster HiRes: Experience the joy of digitizing your precious vinyl collection with pristine audio quality. Equipped with a built-in output board, this remarkable turntable features a record level potentiometer, input switch, line out, USB out, and optical out, allowing you to connect to your PC or Mac and effortlessly capture your favorite LPs in high-resolution formats.

Pro-Ject Debut Carbon RecordMaster HiRes: Experience the joy of digitizing your precious vinyl collection with pristine audio quality. Equipped with a built-in output board, this remarkable turntable features a record level potentiometer, input switch, line out, USB out, and optical out, allowing you to connect to your PC or Mac and effortlessly capture your favorite LPs in high-resolution formats.

Put the platter on the turntable.
Put the counterweight in place. Put a record on the platter.
Balance the tonearm so it stays level by
turning the counterweight forwards and
backwards on the rod.
Debut Carbon Setup Guide
Carefully remove the protection covering.
Turn the whole counterweight counter-
clockwise until the scale reads 18.
19
Put the loop of the Anti Skating Weight in
the second groove on the tonearm post.
Turn the front dial of the counterweight
(not the whole weight) so the ‘0’ is in line
with marker at the back of the tonearm.
Remove the needle protection cover.
Place the tonearm between platter
and armrest.
>
Unpack Dust Cover and put it on the
turntable.
Connect to your hi-system and enjoy
your music!
Tonearm is fragile!
Please read before unpacking
Getting started:
• Make sure to have enough space to unpack your turntable.
• Always unpack and setup in a clean enviroment.
• Important for warranty: Do not throw packaging away.
• Setup is demonstrated with Debut Carbon Esprit SB.
1 32
5
6
4
7
9 10 11
13
15
16
14
17
20
18
a) Adapter for 7“ singles
b) Anti Skating Weight
c) Connect it E RCA cable
d) Round belt for 78 RPM
(not incl. with Debut Carbon DC)
e) Standard at belt for 33/45 RPM
a)
b)
c)
d)
e)
Unpack all items from accessory bag. Remove dust cover carton from the box.
Lift the wrapped turntable
out of the box.
Unpack the counterweight.
Unpack the power supply.
Unpack the platter.
Speed Change
Manual Speed Change:
Small pulley 33 RPM
Large pulley 45 RPM
Electronic
Speed Change
Large pulley for round belt (78 RPM)
Debut Carbon
Debut Carbon Esprit SB
Debut Carbon RecordMaster HiRes
A
B
-OR-
10
Put the drive belt on the pulley
and sub-platter.
A
B
Put the drive belt on the pulley
and sub-platter.
Remove tonearm twist tie.
12
0°
21
22
Find possible sets on the
backside of this paper.
Lower the tonearm with the lift.
Debut Carbon
Connect to any amp with integrated phono amplier
or use an external phono preamp.
Speaker cable Speaker cable
Connect it E (RCA Cable)
Possible Setup:
Pro-Ject Speaker Box 5 S2 (bookshelf speaker)
and Pro-Ject MaiA S2 (stereo integrated amplier).
Features
Gold-plated
RCA sockets
Carbon
Tonearm
Included
felt mat
Debut Carbon Esprit SB
Connect to any amp with integrated phono amplier
or use an external phono preamp.
Features
Gold-plated
RCA sockets
Carbon
Tonearm
Acrylic
Platter
Speaker cable Speaker cable
Connect it E (RCA Cable)
Possible Setup:
Pro-Ject Speaker Box 5 S2 (bookshelf speaker)
and Pro-Ject MaiA S2 (stereo integrated amplier).
Electronic
Speed Control
Debut Carbon RecordMaster HiRes
Output Board: Record Level potentiometer, Input Switch, Line Out, USB Out,
Optical Out. You can record your vinyl in high resolution formats.
Features
Output
Board
Carbon
Tonearm
Acrylic
Platter
Speaker cable Speaker cable
Connect it E (RCA Cable)
Possible Setup:
Pro-Ject Speaker Box 5 S2 (bookshelf speaker)
and Pro-Ject MaiA S2 (stereo integrated amplier).
Electronic
Speed Control
PC / Mac
  • Page 1 1
  • Page 2 2

Pro-Ject Debut Carbon RecordMaster HiRes Installation guide

Debut Carbon RecordMaster HiRes
Pro-Ject
Brand
Pro-Ject
Model
Debut Carbon RecordMaster HiRes
Category
Turntable
Type
Installation guide
This manual is also suitable for

Pro-Ject Debut Carbon RecordMaster HiRes: Experience the joy of digitizing your precious vinyl collection with pristine audio quality. Equipped with a built-in output board, this remarkable turntable features a record level potentiometer, input switch, line out, USB out, and optical out, allowing you to connect to your PC or Mac and effortlessly capture your favorite LPs in high-resolution formats.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents