2. Edelbrock
  3. Elite Tall Bolt Down Breather

Edelbrock Elite Tall Bolt Down Breather Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Edelbrock Elite Tall Bolt Down Breather Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Edelbrock Elite Series Top Mounting Bolt-On Breather
Part #4202 & #4212
INSTALLATION INSTRUCTIONS
1. Using baffle plate bosses on inside of Elite Series valve covers as pilot holes, drill 11/32" holes completely through valve cover.
Also enlarge baffle plate mounting holes.
NOTE: These breathers will not fit Elite Series valve covers #4244, #4246, #4247, or #4248.
2. Clean all chips and burrs from cover and plate.
3. Install grommet, baffle plate, and breather with bolts, nuts and washers supplied.
©2010 Edelbrock Corp. Rev. 5/10 - AJ/mc
Part #4202 & #4212 Brochure #63-4202
®
Edelbrock Elite Series Top Mounting Bolt-On Breather
Part #4202 & #4212
INSTALLATION INSTRUCTIONS
1. Using baffle plate bosses on inside of Elite Series valve covers as pilot holes, drill 11/32" holes completely through valve cover.
Also enlarge baffle plate mounting holes.
NOTE: These breathers will not fit Elite Series valve covers #4244, #4246, #4247, or #4248.
2. Clean all chips and burrs from cover and plate.
3. Install grommet, baffle plate, and breather with bolts, nuts and washers supplied.
©2010 Edelbrock Corp. Rev. 5/10 - AJ/mc
Part #4202 & #4212 Brochure #63-4202
®
Edelbrock Elite Series Top Mounting Bolt-On Breather
Part #4202 & #4212
INSTALLATION INSTRUCTIONS
1. Using baffle plate bosses on inside of Elite Series valve covers as pilot holes, drill 11/32" holes completely through valve cover.
Also enlarge baffle plate mounting holes.
NOTE: These breathers will not fit Elite Series valve covers #4244, #4246, #4247, or #4248.
2. Clean all chips and burrs from cover and plate.
3. Install grommet, baffle plate, and breather with bolts, nuts and washers supplied.
©2010 Edelbrock Corp. Rev. 5/10 - AJ/mc
Part #4202 & #4212 Brochure #63-4202
®
Edelbrock Elite Series Top Mounting Bolt-On Breather
Part #4202 & #4212
INSTALLATION INSTRUCTIONS
1. Using baffle plate bosses on inside of Elite Series valve covers as pilot holes, drill 11/32" holes completely through valve cover.
Also enlarge baffle plate mounting holes.
NOTE: These breathers will not fit Elite Series valve covers #4244, #4246, #4247, or #4248.
2. Clean all chips and burrs from cover and plate.
3. Install grommet, baffle plate, and breather with bolts, nuts and washers supplied.
©2010 Edelbrock Corp. Rev. 5/10 - AJ/mc
Part #4202 & #4212 Brochure #63-4202
®
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Tech Line: 800-416-8628 Office/Sales line: 310-781-2222
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Tech Line: 800-416-8628 Office/Sales line: 310-781-2222
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Tech Line: 800-416-8628 Office/Sales line: 310-781-2222
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Tech Line: 800-416-8628 Office/Sales line: 310-781-2222
/