Ryobi RY40860 Owner's manual

Ryobi
Brand
Ryobi
Model
RY40860
Type
Owner's manual

This manual is also suitable for

Ryobi RY40860 is a versatile tool that can be used for a variety of tasks, including clearing snow, leaves, and debris from your yard. The RY40860 is powered by a 40-volt battery, which provides ample power for even the most challenging jobs. The RY40860 also features a number of innovative features, such as the patented Whisper Series™ technology, which significantly reduces noise levels. This makes the RY40860 ideal for use in residential areas or other noise-sensitive environments.

The RY40860 is also very easy to use. The intuitive controls and lightweight design make it easy to maneuver, even for first-time users. And with its compact size, the RY40860 is easy to store when not in use.

Ryobi RY40860 is a versatile tool that can be used for a variety of tasks, including clearing snow, leaves, and debris from your yard. The RY40860 is powered by a 40-volt battery, which provides ample power for even the most challenging jobs. The RY40860 also features a number of innovative features, such as the patented Whisper Series™ technology, which significantly reduces noise levels. This makes the RY40860 ideal for use in residential areas or other noise-sensitive environments.

The RY40860 is also very easy to use. The intuitive controls and lightweight design make it easy to maneuver, even for first-time users. And with its compact size, the RY40860 is easy to store when not in use.

RY40806
ADDENDUM
ADDENDA / APÉNDICE
WARNING:
This insert sheet is not a substitute for reading the operator’s manual.
To reduce the risk of injury, user must read and understand operator’s
manual before using this product. All page references refer to the
operator’s manual.
INSTALLING CHUTE DEFLECTOR
See Figure 1.
Insert the chute deflector into the snow blower and align the arrow
to the dot in the unlocked position as shown.
Press and twist the chute deflector until the arrow aligns with the dot
in the locked position and the release button clicks into its locked
position.
Insert the Phillips head screw into the screw hole and tighten securely.
Do not overtighten.
Please consult your operator’s manual for further information or contact
RYOBI Customer Service at 1-800-860-4050.
Fig. 1
995000975
7-16-19 (REV:01)
A - Chute (goulotte, vertedor)
B - Arrow on tab (fleche sur la languette, flecha en lengüeta)
C - Dot on collar in unlocked position (point sur le collier en position
déverrouillée, punto en collar en posición de desbloqueo)
D - Dot on collar in locked position (point sur le collier en position verrouillée,
punto en collar en posición de bloqueo)
E - Release button (bouton de dégagement, botón de liberación)
F - Unlocked (déverrouillé, desbloqueo)
G - Locked (verrouillée, bloqueada)
H - Screw hole (orifice de la vis, orificio para el tornillo)
A
B
C
D
E
F
G
B
H
AVERTISSEMENT :
Ce feuillet n’est pas un substitut pour la lecture manuel d’utilisation.
Pour réduire les risques de blessures, l’utilisateur doit lire et veiller à
bien comprendre le manuel d’utilisation avant d’utiliser ce produit. Les
références de page se rapportent au manuel d’utilisation.
INSTALLATION DU DÉFLECTEUR DE GOULOTTE
Voir la figure 5.
Insérer le déflecteur de goulotte dans la souffleuse à neige et veiller à
ce que le fleche s’aligne sur le point en position déverrouillé comme
illustré.
Presser et tourner le déflecteur de goulotte jusqu’à ce que la languette
s’aligne sur le point en position verrouillée et que le bouton de dé-
gagement s’enclenche en position verrouillée.
Insérer le vis de cruciforme dans les trou et serrer fermement. Ne
serrez pas excessivement.
Veuillez consulter le manuel d’utilisation pour en savoir plus ou appeler le
service à la clientèle de RYOBI au 1-800-860-4050.
ADVERTENCIA:
Leer esta hoja agregada no equivale a leer el manual del operador.
Para reducir los riesgos de lesiones, el usuario debe leer y comprender
el manual del operador antes de utilizar este producto. Todas las
referencias a páginas se refieren al manual del operador.
INSTALACIÓN DEL DEFLECTOR DEL VERTEDOR
Vea la figura 5.
Inserte el deflector del vertedor en el equipo quitanieve y alinee
la flecha con el punto de la posición de desbloqueado como se
muestra.
Presione y gire el deflector del vertedor hasta que el punto de la
lengüeta se alinee con el punto de la posición de bloqueo y el botón
de liberación encaje en la posición de bloqueo.
Coloque el tornillo de cabeza Phillips en la orificio y ajústese firme-
mente. No efectúe un apriete excesivo.
Para obtener más información, consulte el manual del operador o póngase
en contacto el Servicio de atención al cliente de RYOBI al 1-800-860-4050.
FRANÇAIS
ESPAÑOL
  • Page 1 1

Ryobi RY40860 Owner's manual

Ryobi
Brand
Ryobi
Model
RY40860
Type
Owner's manual
This manual is also suitable for

Ryobi RY40860 is a versatile tool that can be used for a variety of tasks, including clearing snow, leaves, and debris from your yard. The RY40860 is powered by a 40-volt battery, which provides ample power for even the most challenging jobs. The RY40860 also features a number of innovative features, such as the patented Whisper Series™ technology, which significantly reduces noise levels. This makes the RY40860 ideal for use in residential areas or other noise-sensitive environments.

The RY40860 is also very easy to use. The intuitive controls and lightweight design make it easy to maneuver, even for first-time users. And with its compact size, the RY40860 is easy to store when not in use.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers