Evapo-Rust ER088 User manual

Brand: Evapo-Rust

Model: ER088

Type: User manual

EVAPO-RUST GEL

Vertical surface rust remover

PERFORMANCE

 Removes rust from cast iron, steel and stainless steel.

 Non-corrosive, non-flammable,

 Biodegradable, Contains no VOC’s or HAP’s

 Contains no solvents

 Works at room temperature, requires no special equipment

 Easy and safe to use

 Safe on soft metals, plastic, rubber, PVC and other surfaces unharmed by water alone

 Will not pit or discolor un-rusted steel

DESCRIPTION

EVAPO-RUST GEL has been proven effective to remove even deep rust on all types

of mild steel and iron. It is safe on all surfaces and will not harm copper, brass,

aluminum, plastic, rubber or vinyl. EVAPO-RUST GEL is non-toxic, non-corrosive,

biodegradable and contains no acids or alkalis. It is non-flammable and contains no

petroleum solvents.

DIRECTIONS

Prep surface by removing any dirt or grease

Apply gel by brushing or rolling

Wait for 1hr remove with a soft brush and water and wipe dry

Re-apply if needed

PROPERTIES

Appearance Yellow Gel

Odor Slight odor

Foam None

pH @ 1% 2.0 – 2.3

Environmental Data Biodegradable, Iron content

dictates disposal method.

1 0

Packaging 8 oz. bottles

5 gallon pails

55 gallon drums

To place an order call toll free 1-888-329-9877  1-479-756-9877  Fax 1-479-927-3202

P.O. Box 6487  Springdale, AR 72766 USA  [email protected]

WWW.EVAPO-RUST.COM

Evapo-Rust ER088 User manual

Brand: Evapo-Rust

Model: ER088

Type: User manual

Download PDF

report

Evapo-Rust ER088 User manual

Evapo-Rust ER088 User manual

Related papers

Other documents