Edge-Core ECS2100-52T User manual

CLI Reference Guide

www.edge-core.com

ECS2110-26T

26-Port Web-smart Pro

10G Ethernet Switch

ECS2100-52T

52-Port Web-smart Pro

Gigabit Ethernet Switch

Software Release v1.2.37.192

CLI Reference Guide

ECS2110-26T Gigabit Ethernet Switch

Web-smart Pro 10G Ethernet Switch

with 24 10/100/1000BASE-T (RJ-45) Ports

and 2 10G SFP Ports

ECS2100-52T Gigabit Ethernet Switch

Web-smart Pro Gigabit Ethernet Switch

with 48 10/100/1000BASE-T (RJ-45) Ports

and 4 Gigabit SFP Ports

E102019-CS-R03

– 3 –

How to Use This Guide

This guide includes detailed information on the switch software, including how to

operate and use the management functions of the switch. To deploy this switch

effectively and ensure trouble-free operation, you should first read the relevant

sections in this guide so that you are familiar with all of its software features.

Who Should Read This

Guide?

This guide is for network administrators who are responsible for operating and

maintaining network equipment. The guide assumes a basic working knowledge of

LANs (Local Area Networks), the Internet Protocol (IP), and Simple Network

Management Protocol (SNMP).

How This Guide is

Organized

This guide describes the switch’s command line interface (CLI). For more detailed

information on the switch’s key features or information about the web browser

management interface refer to the Web Management Guide.

The guide includes these sections:

◆ Section I “Getting Started” — Includes information on initial configuration.

◆ Section II “Command Line Interface” — Includes all management options

available through the CLI.

◆ Section III “Appendices” — Includes information on troubleshooting switch

management access.

This guide focuses on switch software configuration through the CLI.

For information on how to manage the switch through the Web management

interface, see the following guide:

Web Management Guide

For information on how to install the switch, see the following guide:

Installation Guide

For all safety information and regulatory statements, see the following documents:

Quick Start Guide

Safety and Regulatory Information

How to Use This Guide

– 4 –

Conventions The following conventions are used throughout this guide to show information:

Note:

Emphasizes important information or calls your attention to related features

or instructions.

Caution:

Alerts you to a potential hazard that could cause loss of data, or damage

the system or equipment.

Documentation

Notice

This documentation is provided for general information purposes only. If any

product feature details in this documentation conflict with the product datasheet,

refer to the datasheet for the latest information.

Revision History This section summarizes the changes in each revision of this guide.

Revision Date Change Description

v1.2.37.192 10/2019 Added

◆

"show ntp status" on page 142

◆

"show ntp statistics peer" on page 143

◆

"show ntp peer-status" on page 143

◆

RIP commands. See "Routing Information Protocol (RIP)" on

page 651.

◆

"show ip route database" on page 650

◆

"show ip route summary" on page 651

◆

"show ip traffic" on page 651

Updated

◆

SSH commands. See "Secure Shell" on page 235.

◆

Default for "port channel load-balance" on page 380

◆

"ntp server" on page 141

◆

"exec-timeout" on page 115

◆

"ntp authentication-key" on page 139

◆

"reload (Global Configuration)" on page 78

Removed

◆

Command “show license file”

◆

Command “ip ssh server-key size”

◆

ERPS commands

v1.1.10.171 01/2019 Updated to correct errors

v1.1.10.171 01/2017 Initial release

– 5 –

Contents

How to Use This Guide 3

Contents 5

Tables 31

Section I Getting Started 37

1 Initial Switch Configuration 39

Connecting to the Switch 39

Configuration Options 39

Connecting to the Console Port 40

Logging Onto the Command Line Interface 41

Setting Passwords 41

Remote Connections 42

Configuring the Switch for Remote Management 42

Using the Network Interface 42

Setting an IP Address 42

Enabling SNMP Management Access 48

Managing System Files 50

Upgrading the Operation Code 51

Saving or Restoring Configuration Settings 51

Automatic Installation of Operation Code and Configuration Settings 53

Downloading Operation Code from a File Server 53

Specifying a DHCP Client Identifier 56

Downloading a Configuration File and Other Parameters from a DHCP Server 57

Setting the System Clock 59

Setting the Time Manually 59

Configuring SNTP 60

Configuring NTP 60

Contents

– 6 –

Section II Command Line Interface 63

2 Using the Command Line Interface 65

Accessing the CLI 65

Console Connection 65

Telnet Connection 66

Entering Commands 67

Keywords and Arguments 67

Minimum Abbreviation 67

Command Completion 67

Getting Help on Commands 68

Partial Keyword Lookup 69

Negating the Effect of Commands 70

Using Command History 70

Understanding Command Modes 70

Exec Commands 70

Configuration Commands 71

Command Line Processing 73

Showing Status Information 73

CLI Command Groups 74

3 General Commands 77

prompt 77

reload (Global Configuration) 78

enable 79

quit 80

show history 80

configure 81

disable 82

reload (Privileged Exec) 82

show reload 83

end 83

exit 83

4 System Management Commands 85

Contents

– 7 –

Device Designation 85

hostname 86

System Status 86

show access-list tcam-utilization 87

show memory 88

show process cpu 89

show process cpu guard 89

show process cpu task 90

show running-config 92

show startup-config 93

show system 94

show tech-support 95

show users 96

show version 97

show watchdog 97

watchdog software 98

Fan Control 98

fan-speed force-full 98

Frame Size 99

jumbo frame 99

File Management 100

General Commands 101

boot system 101

copy 102

delete 106

dir 107

whichboot 108

Automatic Code Upgrade Commands 108

upgrade opcode auto 108

upgrade opcode path 109

upgrade opcode reload 110

show upgrade 111

TFTP Configuration Commands 111

ip tftp retry 111

ip tftp timeout 112

Contents

– 8 –

show ip tftp 112

Line 113

line 114

databits 114

exec-timeout 115

login 116

parity 117

password 117

password-thresh 118

silent-time 119

speed 120

stopbits 120

timeout login response 121

disconnect 121

terminal 122

show line 123

Event Logging 124

logging command 124

logging facility 125

logging history 125

logging host 126

logging on 127

logging trap 128

clear log 128

show log 129

show logging 130

SMTP Alerts 131

logging sendmail 132

logging sendmail destination-email 132

logging sendmail host 133

logging sendmail level 133

logging sendmail source-email 134

show logging sendmail 135

Time 135

Contents

– 9 –

SNTP Commands 136

sntp client 136

sntp poll 137

sntp server 137

show sntp 138

NTP Commands 139

ntp authenticate 139

ntp authentication-key 139

ntp client 140

ntp server 141

show ntp 142

show ntp status 142

show ntp statistics peer 143

show ntp peer-status 143

Manual Configuration Commands 144

clock summer-time (date) 144

clock summer-time (predefined) 145

clock summer-time (recurring) 146

clock timezone 148

calendar set 149

show calendar 149

Time Range 150

time-range 150

absolute 151

periodic 152

show time-range 153

Switch Clustering 153

cluster 154

cluster commander 155

cluster ip-pool 156

cluster member 156

rcommand 157

show cluster 158

show cluster members 158

show cluster candidates 158

Contents

– 10 –

5 SNMP Commands 161

General SNMP Commands 163

snmp-server 163

snmp-server community 163

snmp-server contact 164

snmp-server location 165

show snmp 165

SNMP Target Host Commands 166

snmp-server enable traps 166

snmp-server host 167

snmp-server enable port-traps link-up-down 169

snmp-server enable port-traps mac-notification 170

show snmp-server enable port-traps 170

SNMPv3 Commands 171

snmp-server engine-id 171

snmp-server group 172

snmp-server user 173

snmp-server view 175

show snmp engine-id 176

show snmp group 177

show snmp user 178

show snmp view 179

Notification Log Commands 179

nlm 179

snmp-server notify-filter 180

show nlm oper-status 182

show snmp notify-filter 182

Additional Trap Commands 182

memory 182

process cpu 183

process cpu guard 184

6 Remote Monitoring Commands 187

rmon alarm 188

rmon event 189

Contents

– 11 –

rmon collection history 190

rmon collection rmon1 191

show rmon alarms 192

show rmon events 192

show rmon history 193

show rmon statistics 193

7 Flow Sampling Commands 195

sflow owner 195

sflow polling instance 197

sflow sampling instance 198

show sflow 199

8 Authentication Commands 201

User Accounts and Privilege Levels 202

enable password 202

username 203

privilege 205

show privilege 205

Authentication Sequence 206

authentication enable 206

authentication login 207

RADIUS Client 208

radius-server acct-port 208

radius-server auth-port 209

radius-server host 209

radius-server key 210

radius-server retransmit 211

radius-server timeout 211

show radius-server 212

TACACS+ Client 212

tacacs-server host 213

tacacs-server key 213

tacacs-server port 214

tacacs-server retransmit 214

tacacs-server timeout 215

Contents

– 12 –

show tacacs-server 215

AAA 216

aaa accounting commands 217

aaa accounting dot1x 218

aaa accounting exec 219

aaa accounting update 220

aaa authorization commands 220

aaa authorization exec 221

aaa group server 222

server 223

accounting dot1x 223

accounting commands 224

accounting exec 224

authorization commands 225

authorization exec 226

show accounting 226

show authorization 227

Web Server 228

ip http authentication 229

ip http port 229

ip http server 230

ip http secure-port 230

ip http secure-server 231

Telnet Server 232

ip telnet max-sessions 233

ip telnet port 233

ip telnet server 234

telnet (client) 234

show ip telnet 235

Secure Shell 235

ip ssh authentication-retries 237

ip ssh server 238

ip ssh timeout 239

delete public-key 239

ip ssh crypto host-key generate 240

Contents

– 13 –

ip ssh crypto zeroize 240

ip ssh save host-key 241

show ip ssh 241

show public-key 242

show ssh 242

802.1X Port Authentication 243

General Commands 244

dot1x default 244

dot1x system-auth-control 245

Authenticator Commands 245

dot1x intrusion-action 245

dot1x max-reauth-req 246

dot1x max-req 246

dot1x operation-mode 247

dot1x port-control 248

dot1x re-authentication 248

dot1x timeout quiet-period 249

dot1x timeout re-authperiod 249

dot1x timeout supp-timeout 250

dot1x timeout tx-period 251

dot1x re-authenticate 251

Supplicant Commands 252

dot1x timeout auth-period 252

dot1x timeout held-period 252

Information Display Commands 253

show dot1x 253

Management IP Filter 255

management 255

show management 256

9 General Security Measures 259

Port Security 260

mac-learning 260

port security 261

show port security 263

Contents

– 14 –

Network Access (MAC Address Authentication) 265

network-access aging 265

network-access mac-filter 266

mac-authentication reauth-time 267

network-access dynamic-qos 268

network-access dynamic-vlan 269

network-access guest-vlan 270

network-access max-mac-count 270

network-access mode mac-authentication 271

network-access port-mac-filter 272

mac-authentication intrusion-action 273

mac-authentication max-mac-count 273

clear network-access 274

show network-access 274

show network-access mac-address-table 275

show network-access mac-filter 276

Web Authentication 276

web-auth login-attempts 277

web-auth quiet-period 278

web-auth session-timeout 278

web-auth system-auth-control 279

web-auth 279

web-auth re-authenticate (Port) 280

web-auth re-authenticate (IP) 280

show web-auth 281

show web-auth interface 281

show web-auth summary 282

DHCPv4 Snooping 282

ip dhcp snooping 283

ip dhcp snooping information option 285

ip dhcp snooping information option encode no-subtype 286

ip dhcp snooping information option remote-id 288

ip dhcp snooping information option tr101 board-id 289

ip dhcp snooping information policy 289

ip dhcp snooping verify mac-address 290

Contents

– 15 –

ip dhcp snooping vlan 291

ip dhcp snooping information option circuit-id 292

ip dhcp snooping max-number 294

ip dhcp snooping trust 294

clear ip dhcp snooping binding 295

clear ip dhcp snooping database flash 295

ip dhcp snooping database flash 296

show ip dhcp snooping 296

show ip dhcp snooping binding 297

IPv4 Source Guard 297

ip source-guard binding 298

ip source-guard 300

ip source-guard max-binding 301

ip source-guard mode 302

clear ip source-guard binding blocked 303

show ip source-guard 303

show ip source-guard binding 304

ARP Inspection 305

ip arp inspection 306

ip arp inspection filter 307

ip arp inspection log-buffer logs 308

ip arp inspection validate 309

ip arp inspection vlan 310

ip arp inspection limit 311

ip arp inspection trust 311

show ip arp inspection configuration 312

show ip arp inspection interface 312

show ip arp inspection log 313

show ip arp inspection statistics 313

show ip arp inspection vlan 313

Denial of Service Protection 314

dos-protection echo-chargen 314

dos-protection smurf 315

dos-protection tcp-flooding 315

dos-protection tcp-null-scan 316

Contents

– 16 –

dos-protection tcp-syn-fin-scan 316

dos-protection tcp-xmas-scan 317

dos-protection udp-flooding 317

dos-protection win-nuke 318

show dos-protection 318

Port-based Traffic Segmentation 319

traffic-segmentation 319

traffic-segmentation session 320

traffic-segmentation uplink/downlink 321

traffic-segmentation uplink-to-uplink 322

show traffic-segmentation 323

10 Access Control Lists 325

IPv4 ACLs 325

access-list ip 326

permit, deny (Standard IP ACL) 326

permit, deny (Extended IPv4 ACL) 327

ip access-group 330

show ip access-group 331

show ip access-list 331

IPv6 ACLs 332

access-list ipv6 332

permit, deny (Standard IPv6 ACL) 333

permit, deny (Extended IPv6 ACL) 334

ipv6 access-group 337

show ipv6 access-group 337

show ipv6 access-list 338

MAC ACLs 338

access-list mac 339

permit, deny (MAC ACL) 339

mac access-group 342

show mac access-group 343

show mac access-list 343

ARP ACLs 344

access-list arp 344

Contents

– 17 –

permit, deny (ARP ACL) 345

show access-list arp 346

ACL Information 346

clear access-list hardware counters 347

show access-group 347

show access-list 348

11 Interface Commands 349

Interface Configuration 350

interface 350

capabilities 351

description 352

flowcontrol 353

history 354

media-type 354

negotiation 355

shutdown 356

speed-duplex 356

clear counters 357

show interfaces brief 358

show interfaces counters 359

show interfaces history 362

show interfaces status 364

show interfaces switchport 365

Transceiver Threshold Configuration 366

transceiver-monitor 366

transceiver-threshold-auto 367

transceiver-threshold current 367

transceiver-threshold rx-power 368

transceiver-threshold temperature 369

transceiver-threshold tx-power 370

transceiver-threshold voltage 371

show interfaces transceiver 372

show interfaces transceiver-threshold 373

Contents

– 18 –

Cable Diagnostics 374

test cable-diagnostics 374

show cable-diagnostics 375

Power Savings 376

power-save 376

show power-save 377

12 Link Aggregation Commands 379

Manual Configuration Commands 380

port channel load-balance 380

channel-group 382

Dynamic Configuration Commands 383

lacp 383

lacp admin-key (Ethernet Interface) 384

lacp port-priority 385

lacp system-priority 386

lacp admin-key (Port Channel) 387

lacp timeout 388

Trunk Status Display Commands 389

show lacp 389

show port-channel load-balance 392

13 Port Mirroring Commands 393

Local Port Mirroring Commands 393

port monitor 393

show port monitor 394

RSPAN Mirroring Commands 395

rspan source 397

rspan destination 398

rspan remote vlan 399

no rspan session 400

show rspan 401

14 Congestion Control Commands 403

Rate Limit Commands 403

rate-limit 404

Contents

– 19 –

Storm Control Commands 405

switchport packet-rate 405

15 Loopback Detection Commands 407

loopback-detection 408

loopback-detection action 408

loopback-detection recover-time 409

loopback-detection transmit-interval 410

loopback detection trap 410

loopback-detection release 411

show loopback-detection 411

16 Address Table Commands 413

mac-address-table aging-time 413

mac-address-table static 414

clear collision-mac-address-table 415

clear mac-address-table dynamic 415

show collision-mac-address-table 415

show mac-address-table 416

show mac-address-table aging-time 417

show mac-address-table count 417

17 Spanning Tree Commands 419

spanning-tree 420

spanning-tree cisco-prestandard 421

spanning-tree forward-time 421

spanning-tree hello-time 422

spanning-tree max-age 423

spanning-tree mode 423

spanning-tree mst configuration 425

spanning-tree pathcost method 425

spanning-tree priority 426

spanning-tree system-bpdu-flooding 427

spanning-tree tc-prop 427

spanning-tree transmission-limit 428

max-hops 429

Contents

– 20 –

mst priority 429

mst vlan 430

name 431

revision 431

spanning-tree bpdu-filter 432

spanning-tree bpdu-guard 433

spanning-tree cost 434

spanning-tree edge-port 435

spanning-tree link-type 436

spanning-tree loopback-detection 436

spanning-tree loopback-detection action 437

spanning-tree loopback-detection release-mode 438

spanning-tree loopback-detection trap 439

spanning-tree mst cost 439

spanning-tree mst port-priority 440

spanning-tree port-bpdu-flooding 441

spanning-tree port-priority 441

spanning-tree root-guard 442

spanning-tree spanning-disabled 443

spanning-tree tc-prop-stop 443

spanning-tree loopback-detection release 444

spanning-tree protocol-migration 445

show spanning-tree 445

show spanning-tree mst configuration 448

show spanning-tree tc-prop 448

18 VLAN Commands 449

Editing VLAN Groups 449

vlan database 450

vlan 450

Configuring VLAN Interfaces 451

interface vlan 452

switchport acceptable-frame-types 453

switchport allowed vlan 453

switchport ingress-filtering 455

Page is loading ...

Edge-Core ECS2100-52T User manual

This manual is also suitable for

Edge-Core ECS2100-52T User manual

Related papers

Other documents