BOND MANUFACTURING 71662 Installation guide

INSTALLING YOUR GARDEN HOSE

• Remove hose from package and ties.

• Unwind the hose loosely in a circular motion.

• Place washer firmly into coupling at faucet end to ensure a tight seal.

• Run water through the house.

• Wind hose accordingly.

CARE AND USE OF YOUR GARDEN HOSE

• IMPORTANT: This hose is intended for normal lawn and garden use.

• For proper use, allow water to flush through hose for several minutes before using.

• DO NOT RUN HOT WATER THROUGH THIS HOSE.

• Do not leave hose under pressure when not in use.

• Drain your hose in the summer when you are not using it and keep it shaded as much as

possible.

• Protect your hose from harsh winter weather by storing it indoors. Be sure to drain the

hose completely before storing as water remaining in the hose can freeze, damaging the

hose.

• WARNING: Do not spray water into an electrical outlet. Severe electrical shock could

result.

• ONLY USE A DRINKING WATER SAFE HOSE FOR DRINKING WATER PURPOSES

• Do not drink from this hose if there is a possibility of its exposure to any conditions

which can be harmful to humans such as mold & bacteria, lawn & garden chemicals,

animal waste, insects, stagnant water or other harmful substances.

WARRANTY

5 YEAR WARRANTY AGAINST MANUFACTURER’S DEFECT IN MATERIALS & WORKMANSHIP

Questions or concerns?

Do not return this product to the store. Please contact Bond Manufacturing directly for support

at 1-866-771-BOND (2663) M-F from 8:00 am to 4:30 pm PST.

We are committed to delivering high quality products and services to you.

Thank you for your purchase!