PRODUCT DESCRIPTION PRODUCT DIMENSIONS SPECIFICATIONS WARRANTY
23" DEPTH
18" FRAME WIDTH
13" FRAME HEIGHT
Designer Series, Raised Style - 18"
Paper Towel w/Cutlery Drawer &
Cutting Board
13" Tilt-Out Paper Towel
Holder w/Cutlery Drawer &
Poly Cutting Board
Item No. DE-DPCF13
Product Dimensions Product Features
INSERT CABINET
USE GLOVE TO HAND SCREW
PEG-LEG DOWN TO FLOOR
BASE - USE LEVELER TO
CONFIRM ELEVATION
ROD HANDLE
COMPONET FEATURES
A 1/16" RAISED FRAME
VISIBLE EDGE ENABLING
YOU TO PLACE TWO OR
MORE COMPONETS SIDE
BY SIDE OR ONTOP OF
ONE ANOTHER CREATING
ONE SINGLE LARGER
FUNCTIONING COMPONET
OF YOUR OWN CHOOSING
COMBINE MULTIPLE COMPONENTS TOGETHER
INTO UNLIMITED COMBINATIONS
2. REMOVE TOWLE HOLDER
3. MOUNT COMBO & LOWER LEGS
1 . INSERT COMPONET
Product Installation
See SUNSTONE manufacture website for additional
product support and product tutorials:
www.sunstonemetalproducts.com
IMPORTANT!! - ROD HANDLES ARE MOUNTED TO INSIDE OF PANEL,
YOU MUST UNSCREW AND MOUNT ON OUTSIDE OF DOOR PANEL.
HAVE 22"
CLEARANCE
INSIDE DEPTH
ISLAND WALL CUT-OUT SIZE IS
16-1/2" WIDTH BY 11" HEIGHT BY 22" DEPTH
18" WIDTH x13" HEIGHT x23"
DEPTH (PRODUCT SIZE) 16-1/2"
WIDTH x11" HEIGHT x22" DEPTH
(CUT-OUT)
•EXTERIOR FINISH -----------------3 YEARS
•ROD HANDLES---------------------3 YEARS
•DRAWER TRACK------------------ 1 YEAR
•PEG-LEGS--------------------------- 1 YEAR
Frame is made from 16 gauge 304 SS,
and panel's are made from 18 gauge
304 SS. Paper Towel Holder is 18
gauge 304 SS. Inside Drawer Box is
made with 20 gauge 201 SS. Handle is
Solid 304 SS.
DE-DPCF13
POLY CUTTING BOARD
INSERTS INTO CUTLERY
DRAWER TOP
CUTLERY DRAWER HAS
WALLS FOR MULTIPLE
UTENSILS & BBQ TOOLS
PAPER TOWEL HOLDER
TILTS OUT 45 DEGREES
SECURES BY 2-MAGNETS
DE-DD13
26" COMBINED HEIGHT
23-3/4" COMBINED CUT-OUT HEIGHT
11" HEIGHT
16-1/2" WIDTH CUT-OUT
REMOVE THE PAPER
TOWEL HOLDER
COMPARTMENT
REMOVE SCREWS
ON EITHER SIDE
REMOVE SCREWS
REMOVE SCREWS
MOUNT INTO SIDE
FRAME USING SCREWS
11" CUT-OUT HEIGHT
FOR WHEN UNIT IS INSTALLED
BY ITSELF, ADD 1-3/4" ADDITIONAL
HEIGHT TO CUTOUT WHEN STACKING
WITH OTHER COMPONENT
/
