Pro-Ject Pick it DS2 MC Product information

Brand: Pro-Ject

Model: Pick it DS2 MC

Type: Product information

Pro-Ject Pick it DS2 MC is a high-quality moving coil cartridge designed to deliver exceptional audio performance. Its low moving mass and high-quality construction ensure dynamic, detailed sound with superior low distortion. The cartridge's low source impedance effectively suppresses outside interference, ensuring a clean and accurate sound. With its gold-plated connectors, threaded holes for easy mounting, and robust polyamide body, the Pick it DS2 MC offers both convenience and durability.

PRODUCT INFORMATION

Technical data and price changes reserved.

Page 1/2

PRO-JECT AUDIO SYSTEMS

www.project-audio.com

Pick it DS2 MC

High End MC cartridge

MSRP 599 € (incl. VAT)

Output voltage: 0,5 mV

Frequency response: 20 - 24 000 Hz

Channel separation: 25dB @ 1kHz

Compliance dynamic/lateral: 14 µm/mN

Stylus type: Naked Elliptical

Stylus tip radius: 8/18 µm

Tracking force, recommended: 2,2 g (mN)

Tracking force, range: 2,0 - 2,5 g (mN)

Tracking angle: 20°

Spool material: Pure 4N Cu

Recommended load resistance: 20 Ω

Cartriddge weight: 9 g

� Moving Coil principle

� Simple and fast mounting

� High delity

� Exceptionally lively

� Very detailed with low distortion

� Needs MC-compatible phono input

� Robust polyamid-body

� Resonance free thanks to laser-sintering-process

� Rigid mounting plate out of metal

� Threaded holes for simple mouting without nuts

� Optimum contact to headshell thanks to three-point

pad

PRODUCT INFORMATION

Technical data and price changes reserved.

Page 2/2

PRO-JECT AUDIO SYSTEMS

www.project-audio.com

Moving Coil – high quality

When looking for high quality HiFi cartridges it is very

obvious, that real High End systems almost exclusive-

ly use the Moving Coil principle. Because of the lower

moving mass – the moving coil is a lot lighter than a

moving magnet – a dynamic and detailed sound with

superior low distortion is possible. The resulting lower

output voltage can be compensated nowadays with the

use of a high quality phono stage (such as Phono Box

DS2, Tube Box DS2, Phono Box RS). Another advantage

is, that because of the very low source impedance (5

Ohms to 1 kOhm) outside interferences, like hum, are

surpressed very eectively. If your phono pre-amplier

has variable load impedance (like Phono Box RS, Tube

Box DS2) this allows for a wide ne-tuning. The four

connectors on the back are gold-plated, the threaded

holes oer a fast and ecient mounting. The massive

metal plate with three contact-points oers best possi-

ble contact to the tonearm.

Pick-it DS2 MC: Exceptional

Pick-it DS2 MC is Pro-Ject‘s current high end cartridge.

The corpus is made of polyamid, which has excellent me-

chanical specications. System-body and needle guard

are made in a special selective laser sintering (SLS) pro-

cess. Here the body is created by slowly melting the

material (powder) via laser. This results in almost reso-

nance-free material, which is an enormously important

aspect for analogue playback. Optimum attention to de-

tail and a distortion free, musical sound are the outcome!

Pro-Ject Pick it DS2 MC Product information

Pro-Ject Pick it DS2 MC Product information

Pro-Ject Pick it DS2 MC Product information

Related papers

Other documents