Chicago Electric Item 63023 Owner's manual

Category
Power tools
Type
Owner's manual

This manual is also suitable for

!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5
%65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5
;'$$"83%).**7%#&79%#*/,(,$*7<
Owners Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference. 19e
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2015 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
To ols required for assembly and se rv ic e m ay n ot b e i nc lu de d .
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 =&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1 Item 63023
GH=6IJ KL6MHINKO PHNOI6OHO;6G6IQL
I,+7*%&2%;&8$*8$#
Safety ......................................................... 2
Specifications ............................................ 10
Setup ......................................................... 10
Operation ................................................... 12
Maintenance .............................................. 14
Parts List and Diagram .............................. 18
Warranty .................................................... 20
RHMONOS%GJPTKUG%HOV%V6=NONINKOG
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
NPLKMIHOI%GH=6IJ%NO=KMPHINKO
S*8*(,7%L&)*(%I&&7%G,2*$<%R,(8"83#
M*,9%,77%#,2*$<%),(8"83#%,89%"8#$('4$"&8#1%%
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
G,W*%,77%),(8"83#%,89%"8#$('4$"&8#%2&(%2'$'(*%(*2*(*84*1%
The term ″power tool″ in the warnings refers to your mains-operated (corded) power tool.
R&(X%H(*,%G,2*$<
1. Y**/%)&(X%,(*,%47*,8%,89%)*77%7"$1
Cluttered or dark areas invite accidents.
2. V&%8&$%&/*(,$*%/&)*(%$&&7#%"8%*Z/7&#"W*%
,$5&#/.*(*#?%#'4.%,#%"8%$.*%/(*#*84*%&2%
27,55,+7*%7">'"9#?%3,#*#%&(%9'#$1 Power tools
create sparks which may ignite the dust or fumes.
3. Y**/%4."79(*8%,89%+<#$,89*(#%
,),<%)."7*%&/*(,$"83%,%/&)*(%$&&71
Distractions can cause you to lose control.
Page 3=&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1Item 63023
GH=6IJKL6MHINKOPHNOI6OHO;6 G6IQL
67*4$("4,7%G,2*$<
1. L&)*(%$&&7%/7'3#%5'#$%5,$4.%$.*%&'$7*$1%%%
O*W*(%5&9"2<%$.*%/7'3%"8%,8<%),<1%%
V&%8&$%'#*%,8<%,9,/$*(%/7'3#%)"$.%3(&'89*9%
/&)*(%$&&7#1 Unmodified plugs and matching
outlets will reduce risk of electric shock.
2. HW&"9%+&9<%4&8$,4$%)"$.%3(&'89*9%#'(2,4*#%
#'4.%,#%/"/*#?%(,9",$&(#?%(,83*#%,89%
(*2("3*(,$&(#1 There is an increased risk of
electric shock if your body is grounded.
3. V&%8&$%*Z/&#*%/&)*(%$&&7#%$&%(,"8%&(%)*$%
4&89"$"&8#1 Water entering a power tool
will increase the risk of electric shock.
4. V&%8&$%,+'#*%$.*%4&(91%%O*W*(%'#*%$.*%4&(9%
2&(%4,((<"83?%/'77"83%&(%'8/7'33"83%$.*%/&)*(%
$&&71%%Y**/%4&(9%,),<%2(&5%.*,$?%&"7?%#.,(/%
*93*#%&(%5&W"83%/,($#1%%Damaged or entangled
cords increase the risk of electric shock.
5. R.*8%&/*(,$"83%,%/&)*(%$&&7%&'$9&&(#?%'#*%
,8%*Z$*8#"&8%4&(9%#'"$,+7*%2&(%&'$9&&(%'#*1
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
6. N2%&/*(,$"83%,%/&)*(%$&&7%"8%,%9,5/%7&4,$"&8%
"#%'8,W&"9,+7*?%'#*%,%S(&'89%=,'7$%;"(4'"$%
N8$*(('/$*(%[S=;N\%/(&$*4$*9%#'//7<1
Use of a GFCI reduces the risk of electric shock.
L*(#&8,7%G,2*$<
1. G$,<%,7*($?%),$4.%).,$%<&'%,(*%9&"83%,89%
'#*%4&55&8%#*8#*%).*8%&/*(,$"83%,%
/&)*(%$&&71%%V&%8&$%'#*%,%/&)*(%$&&7%)."7*%
<&'%,(*%$"(*9%&(%'89*(%$.*%"827'*84*%&2%
9('3#?%,74&.&7%&(%5*9"4,$"&81 A moment
of inattention while operating power tools
may result in serious personal injury.
2. Q#*%#,2*$<%*>'"/5*8$1%%H7),<#%)*,(%*<*%
/(&$*4$"&81 Safety equipment such as
dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate
conditions will reduce personal injuries.
3. L(*W*8$%'8"8$*8$"&8,7%#$,($"831%68#'(*%
$.*%#)"$4.0$("33*(%"#%"8%$.*%&22A/&#"$"&8%
+*2&(*%4&88*4$"83%$&%/&)*(%#&'(4*%,890
&(%+,$$*(<%/,4X?%/"4X"83%'/%&(%4,((<"83%$.*%
$&&71 Carrying power tools with your finger
on the switch or energizing power tools that
have the switch on invites accidents.
4. M*5&W*%,8<%,9]'#$"83%X*<%&(%)(*84.%
+*2&(*%$'(8"83%$.*%/&)*(%$&&7%&81
A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
5. V&%8&$%&W*((*,4.1%%Y**/%/(&/*(%2&&$"83%,89%
+,7,84*%,$%,77%$"5*#1 This enables better control
of the power tool in unexpected situations.
6. V(*##%/(&/*(7<1%%V&%8&$%)*,(%7&&#*%47&$."83%&(%
]*)*7(<1%%Y**/%<&'(%.,"(?%47&$."83%,89%37&W*#%
,),<%2(&5%5&W"83%/,($#1 Loose clothes, jewelry
or long hair can be caught in moving parts.
7. N2%9*W"4*#%,(*%/(&W"9*9%2&(%$.*%4&88*4$"&8%&2%
9'#$%*Z$(,4$"&8%,89%4&77*4$"&8%2,4"7"$"*#?%*8#'(*%
$.*#*%,(*%4&88*4$*9%,89%/(&/*(7<%'#*91 Use of
these devices can reduce dust-related hazards.
8. K87<%'#*%#,2*$<%*>'"/5*8$%$.,$%.,#%+**8%
,//(&W*9%+<%,8%,//(&/(",$*%#$,89,(9#%,3*84<1
Unapproved safety equipment may not provide
adequate protection. Eye protection must
be ANSI-approved and breathing
protection must be NIOSH-approved for
the specific hazards in the work area.
L&)*(%I&&7%Q#*%,89%;,(*
1. V&%8&$%2&(4*%$.*%/&)*(%$&&71%%%
Q#*%$.*%4&((*4$%/&)*(%$&&7%2&(%<&'(%,//7"4,$"&81
The correct power tool will do the job better and
safer at the rate for which it was designed.
2. V&%8&$%'#*%$.*%/&)*(%$&&7%"2%$.*%#)"$4.0$("33*(%
9&*#%8&$%$'(8%"$%&8%,89%&221
Any power tool that cannot be controlled with the
switch/trigger is dangerous and must be repaired.
3. V"#4&88*4$%$.*%/7'3%2(&5%$.*%/&)*(%#&'(4*%
+*2&(*%5,X"83%,8<%,9]'#$5*8$#?%4.,83"83%
,44*##&("*#?%&(%#$&("83%/&)*(%$&&7#1
Such preventive safety measures reduce the
risk of starting the power tool accidentally.
4. G$&(*%"97*%/&)*(%$&&7#%&'$%&2%$.*%(*,4.%&2%
4."79(*8%,89%9&%8&$%,77&)%/*(#&8#%'82,5"7",(%
)"$.%$.*%/&)*(%$&&7%&(%$.*#*%"8#$('4$"&8#%
$&%&/*(,$*%$.*%/&)*(%$&&71 Power tools are
dangerous in the hands of untrained users.
Page 4 =&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1 Item 63023
GH=6IJ KL6MHINKO PHNOI6OHO;6G6IQL
5. P,"8$,"8%/&)*(%$&&7#1%%;.*4X%2&(%5"#,7"385*8$%
&(%+"89"83%&2%5&W"83%/,($#?%+(*,X,3*%&2%/,($#%
,89%,8<%&$.*(%4&89"$"&8%$.,$%5,<%,22*4$%$.*%
/&)*(%$&&7^#%&/*(,$"&81%%N2%9,5,3*9?%.,W*%$.*%
/&)*(%$&&7%(*/,"(*9%+*2&(*%'#*1 Many accidents
are caused by poorly maintained power tools.
6. Y**/%4'$$"83%$&&7#%#.,(/%,89%47*,81
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
7. Q#*%$.*%/&)*(%$&&7?%,44*##&("*#%,89%$&&7%+"$#%
*$41%"8%,44&(9,84*%)"$.%$.*#*%"8#$('4$"&8#?%
$,X"83%"8$&%,44&'8$%$.*%)&(X"83%4&89"$"&8#%
,89%$.*%)&(X%$&%+*%/*(2&(5*91 Use of the
power tool for operations different from those
intended could result in a hazardous situation.
G*(W"4*
_,W*%<&'(%/&)*(%$&&7%#*(W"4*9%+<%,%>',7"2"*9%(*/,"(%/*(#&8%'#"83%&87<%"9*8$"4,7%(*/7,4*5*8$%/,($#1
This will ensure that the safety of the power tool is maintained.
G,2*$<%R,(8"83#%;&55&8%2&(%H+(,#"W*%;'$$"83A&22%K/*(,$"&8#
1. I."#%/&)*(%$&&7%"#%"8$*89*9%$&%2'84$"&8%,#%
,%4'$A&22%$&&7%%M*,9%,77%#,2*$<%),(8"83#?%
"8#$('4$"&8#?%"77'#$(,$"&8#%,89%#/*4"2"4,$"&8#%
/(&W"9*9%)"$.%$."#%/&)*(%$&&71%
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
2. K/*(,$"&8#%#'4.%,#%3("89"83?%#,89"83?%
)"(*%+('#."83?%&(%/&7"#."83%,(*%8&$%
(*4&55*89*9%$&%+*%/*(2&(5*9%)"$.%
$."#%/&)*(%$&&71%%Operations for which the
power tool was not designed may create
a hazard and cause personal injury.
3. V&%8&$%'#*%,44*##&("*#%)."4.%,(*%8&$%
#/*4"2"4,77<%9*#"38*9%,89%(*4&55*89*9%
+<%$.*%$&&7%5,8'2,4$'(*(1%%Just because the
accessory can be attached to your power tool,
it does not assure safe operation.
4. I.*%(,$*9%#/**9%&2%$.*%,44*##&(<%5'#$%+*%,$%
7*,#$%*>',7%$&%$.*%5,Z"5'5%#/**9%5,(X*9%&8%
$.*%/&)*(%$&&71%%Accessories running faster than
their RATED SPEED can break and fly apart.
5. I.*%&'$#"9*%9",5*$*(%,89%$.*%$."4X8*##%&2%<&'(%
,44*##&(<%5'#$%+*%)"$."8%$.*%4,/,4"$<%(,$"83%
&2%<&'(%/&)*(%$&&71%%Incorrectly sized accessories
cannot be adequately guarded or controlled.
6. I.*%,(+&(%#"`*%&2%).**7#?%27,83*#?%+,4X"83%
/,9#%&(%,8<%&$.*(%,44*##&(<%5'#$%/(&/*(7<%
2"$%$.*%#/"897*%&2%$.*%/&)*(%$&&71%%Accessories
with arbor holes that do not match the mounting
hardware of the power tool will run out of balance,
vibrate excessively and may cause loss of control.
7. V&%8&$%'#*%,%9,5,3*9%,44*##&(<1%%
T*2&(*%*,4.%'#*%"8#/*4$%$.*%,44*##&(<%#'4.%
,#%,+(,#"W*%).**7#%2&(%4."/#%,89%4(,4X#?%
+,4X"83%/,9%2&(%4(,4X#?%$*,(%&(%*Z4*##%)*,(?%
)"(*%+('#.%2&(%7&&#*%&(%4(,4X*9%)"(*#1%%N2%/&)*(%
$&&7%&(%,44*##&(<%"#%9(&//*9?%"8#/*4$%2&(%
9,5,3*%&(%"8#$,77%,8%'89,5,3*9%,44*##&(<1%
H2$*(%"8#/*4$"83%,89%"8#$,77"83%,8%,44*##&(<?%
/&#"$"&8%<&'(#*72%,89%+<#$,89*(#%,),<%2(&5%
$.*%/7,8*%&2%$.*%(&$,$"83%,44*##&(<%,89%('8%
$.*%/&)*(%$&&7%,$%5,Z"5'5%8&A7&,9%#/**9%
2&(%&8*%5"8'$*1%%Damaged accessories will
normally break apart during this test time.
8. R*,(%/*(#&8,7%/(&$*4$"W*%*>'"/5*8$1%V*/*89"83%
&8%,//7"4,$"&8?%'#*%2,4*%#."*79?%#,2*$<%3&337*#%
&(%#,2*$<%37,##*#1%%H#%,//(&/(",$*?%)*,(%9'#$%
5,#X?%.*,("83%/(&$*4$&(#?%37&W*#%,89%)&(X#.&/%
,/(&8%4,/,+7*%&2%#$&//"83%#5,77%,+(,#"W*%&(%
)&(X/"*4*%2(,35*8$#1%%I.*%*<*%/(&$*4$"&8%5'#$%
+*%4,/,+7*%&2%#$&//"83%27<"83%9*+("#%3*8*(,$*9%
+<%W,("&'#%&/*(,$"&8#1 The eye protection must
be capable of stopping flying debris generated by
various operations. The dust mask or respirator
must be capable of filtering out particles generated
by your operation. Prolonged exposure to
high intensity noise may cause hearing loss.
9. Y**/%+<#$,89*(#%,%#,2*%9"#$,84*%,),<%
2(&5%)&(X%,(*,1%%H8<&8*%*8$*("83%$.*%
)&(X%,(*,%5'#$%)*,(%/*(#&8,7%/(&$*4$"W*%
*>'"/5*8$1%%Fragments of workpiece or of
a broken accessory may fly away and cause
injury beyond immediate area of operation.
10. _&79%/&)*(%$&&7%+<%"8#'7,$*9%3("//"83%#'(2,4*#%
&87<?%).*8%/*(2&(5"83%,8%&/*(,$"&8%).*(*%
$.*%,44*##&(<%5,<%4&8$,4$%."99*8%)"("83%
&(%"$#%&)8%4&(91%%An accessory contacting a
″live″ wire may make exposed metal parts of
the power tool ″live″ and shock the operator.
11. L&#"$"&8%$.*%4&(9%47*,(%&2%$.*%#/"88"83%
,44*##&(<1%%
If you lose control, the cord may be cut or
snagged and your hand or arm may be
pulled into the spinning accessory.
Page 5=&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1Item 63023
GH=6IJKL6MHINKOPHNOI6OHO;6 G6IQL
12. O*W*(%7,<%$.*%/&)*(%$&&7%9&)8%'8$"7%$.*%
,44*##&(<%.,#%4&5*%$&%,%4&5/7*$*%#$&/1
The spinning accessory may grab the surface
and pull the power tool out of your control.
13. V&%8&$%('8%$.*%/&)*(%$&&7%)."7*%4,((<"83%
"$%,$%<&'(%#"9*1 Accidental contact with the
spinning accessory could snag your clothing,
pulling the accessory into your body.
14. M*3'7,(7<%47*,8%$.*%/&)*(%$&&7^#%,"(%W*8$#1
The motor’s fan will draw the dust inside
the housing and excessive accumulation of
powdered metal may cause electrical hazards.
15. V&%8&$%&/*(,$*%$.*%/&)*(%$&&7%8*,(%27,55,+7*%
5,$*(",7#1 Sparks could ignite these materials.
16. V&%8&$%'#*%,44*##&("*#%$.,$%(*>'"(*%7">'"9%
4&&7,8$#1 Using water or other liquid coolants
may result in electrocution or shock.
17. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
18. Avoid unintentional starting.
Prepare to begin work before turning on the tool.
19. Do not leave the tool unattended when it is plugged
into an electrical outlet. Turn off the tool, and
unplug it from its electrical outlet before leaving.
20. Use clamps (not included) or other practical
ways to secure and support the workpiece to
a stable platform. Holding the work by hand
or against your body is unstable and may
lead to loss of control and personal injury.
21. This product is not a toy.
Keep it out of reach of children.
22. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
In addition, people with pacemakers should:
Avoid operating alone.
• Do not use with power switch locked on.
• Properly maintain and inspect
to avoid electrical shock.
• Properly ground power cord. Ground Fault Circuit
Interrupter (GFCI) should also be implemented
– it prevents sustained electrical shock.
23. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
Y"4X+,4X%,89%M*7,$*9%R,(8"83#
Kickback is a sudden reaction to a pinched or
snagged rotating wheel, backing pad, brush
or any other accessory. Pinching or snagging
causes rapid stalling of the rotating accessory
which in turn causes the uncontrolled power
tool to be forced in the direction opposite of the
accessory’s rotation at the point of the binding.
For example, if an abrasive wheel is snagged or
pinched by the workpiece, the edge of the wheel that
is entering into the pinch point can dig into the surface
of the material causing the wheel to climb out or kick
out. The wheel may either jump toward or away from
the operator, depending on direction of the wheel’s
movement at the point of pinching. Abrasive wheels
may also break under these conditions.
Kickback is the result of power tool misuse and/or
incorrect operating procedures or conditions and can be
avoided by taking proper precautions as given below.
1. P,"8$,"8%,%2"(5%3("/%&8%$.*%/&)*(%$&&7%,89%
/&#"$"&8%<&'(%+&9<%,89%,(5%$&%,77&)%<&'%$&%
(*#"#$%X"4X+,4X%2&(4*#1%%H7),<#%'#*%,'Z"7",(<%
.,897*?%"2%/(&W"9*9?%2&(%5,Z"5'5%4&8$(&7%
&W*(%X"4X+,4X%&(%$&(>'*%(*,4$"&8%9'("83%#$,($A
'/1 The operator can control torque reactions or
kickback forces, if proper precautions are taken.
2. O*W*(%/7,4*%<&'(%.,89%8*,(%$.*%
(&$,$"83%,44*##&(<1 Accessory
may kickback over your hand.
3. V&%8&$%/&#"$"&8%<&'(%+&9<%"8%$.*%,(*,%).*(*%
/&)*(%$&&7%)"77%5&W*%"2%X"4X+,4X%&44'(#1
Kickback will propel the tool in direction opposite
to the wheel’s movement at the point of snagging.
4. Q#*%#/*4",7%4,(*%).*8%)&(X"83%4&(8*(#?%#.,(/%
*93*#%*$41%%HW&"9%+&'84"83%,89%#8,33"83%$.*%
,44*##&(<1 Corners, sharp edges or bouncing
have a tendency to snag the rotating accessory
and cause loss of control or kickback.
5. V&%8&$%,$$,4.%,%#,)%4.,"8%)&&94,(W"83%
+7,9*%&(%$&&$.*9%#,)%+7,9*1 Such blades
create frequent kickback and loss of control.
Page 6 =&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1 Item 63023
GH=6IJ KL6MHINKO PHNOI6OHO;6G6IQL
G,2*$<%R,(8"83#%G/*4"2"4%2&(%S("89"83%,89%
H+(,#"W*%;'$$"83A&22%K/*(,$"&8#
1. Q#*%&87<%).**7%$</*#%$.,$%,(*%(*4&55*89*9%
2&(%<&'(%/&)*(%$&&7%,89%$.*%#/*4"2"4%
3',(9%9*#"38*9%2&(%$.*%#*7*4$*9%).**71
Wheels for which the power tool was not designed
cannot be adequately guarded and are unsafe.
2. I.*%3',(9%5'#$%+*%#*4'(*7<%,$$,4.*9%
$&%$.*%/&)*(%$&&7%,89%/&#"$"&8*9%2&(%
5,Z"5'5%#,2*$<?%#&%$.*%7*,#$%,5&'8$%&2%
).**7%"#%*Z/&#*9%$&),(9#%$.*%&/*(,$&(1
The guard helps to protect operator from broken
wheel fragments and accidental contact with wheel.
3. R.**7#%5'#$%+*%'#*9%&87<%2&(%(*4&55*89*9%
,//7"4,$"&8#1%%=&(%*Z,5/7*-%9&%8&$%3("89%)"$.%
$.*%#"9*%&2%4'$A&22%).**71 Abrasive cut-off wheels
are intended for peripheral grinding, side forces
applied to these wheels may cause them to shatter.
4. H7),<#%'#*%'89,5,3*9%).**7%27,83*#%
$.,$%,(*%&2%4&((*4$%#"`*%,89%#.,/*%2&(%<&'(%
#*7*4$*9%).**71%%Proper wheel flanges support
the wheel thus reducing the possibility of wheel
breakage. Flanges for cut-off wheels may
be different from grinding wheel flanges.
5. V&%8&$%'#*%)&(8%9&)8%).**7#%2(&5%7,(3*(%
/&)*(%$&&7#1 Wheel intended for larger
power tool is not suitable for the higher
speed of a smaller tool and may burst.
6. V(*##%,//(&/(",$*7<1 Wear leather
leggings and fire resistant footwear during
use. Do not wear pants with cuffs, shirts
with open pockets, or any clothing that can
catch and hold molten metal or sparks.
Page 7=&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1Item 63023
GH=6IJKL6MHINKOPHNOI6OHO;6 G6IQL
G,2*$<%R,(8"83#%G/*4"2"4%2&(%H+(,#"W*%;'$$"83A&22%K/*(,$"&8#
1. V&%8&$%a],5b%$.*%4'$A&22%).**7%&(%,//7<%
*Z4*##"W*%/(*##'(*1%%V&%8&$%,$$*5/$%$&%5,X*%
,8%*Z4*##"W*%9*/$.%&2%4'$1 Overstressing the
wheel increases the loading and susceptibility
to twisting or binding of the wheel in the cut and
the possibility of kickback or wheel breakage.
2. V&%8&$%/&#"$"&8%<&'(%+&9<%"8%7"8*%)"$.%,89%
+*."89%$.*%(&$,$"83%).**71 When the wheel,
at the point of operation, is moving away from
your body, the possible kickback may propel the
spinning wheel and the power tool directly at you.
3. R.*8%).**7%"#%+"89"83%&(%).*8%"8$*(('/$"83%,%
4'$%2&(%,8<%(*,#&8?%#)"$4.%&22%$.*%/&)*(%$&&7%
,89%.&79%$.*%/&)*(%$&&7%5&$"&87*##%'8$"7%$.*%
).**7%4&5*#%$&%,%4&5/7*$*%#$&/1%%O*W*(%,$$*5/$%
$&%(*5&W*%$.*%4'$A&22%).**7%2(&5%$.*%4'$%)."7*%
$.*%).**7%"#%"8%5&$"&8%&$.*()"#*%X"4X+,4X%
5,<%&44'(1 Investigate and take corrective
action to eliminate the cause of wheel binding.
4. V&%8&$%(*#$,($%$.*%4'$$"83%&/*(,$"&8%"8%
$.*%)&(X/"*4*1%U*$%$.*%).**7%(*,4.%2'77%
#/**9%,89%4,(*2'77<%(**8$*(%$.*%4'$1
The wheel may bind, walk up or kickback if
the power tool is restarted in the workpiece.
5. G'//&($%/,8*7#%&(%,8<%&W*(#"`*9%
)&(X/"*4*%$&%5"8"5"`*%$.*%("#X%&2%).**7%
/"84."83%,89%X"4X+,4X1 Large workpieces
tend to sag under their own weight. Supports
must be placed under the workpiece near
the line of cut and near the edge of the
workpiece on both sides of the wheel.
6. Q#*%*Z$(,%4,'$"&8%).*8%5,X"83%,%a/&4X*$%4'$b%
"8$&%*Z"#$"83%),77#%&(%&$.*(%+7"89%,(*,#1
The protruding wheel may cut gas or water pipes,
electrical wiring or objects that can cause kickback.
!"+(,$"&8%G,2*$<
This tool vibrates during use. Repeated or
long-term exposure to vibration may cause
temporary or permanent physical injury,
particularly to the hands, arms and shoulders. To
reduce the risk of vibration-related injury:
1. Anyone using vibrating tools regularly or for an
extended period should first be examined by a
doctor and then have regular medical check-ups
to ensure medical problems are not being caused
or worsened from use. Pregnant women or
people who have impaired blood circulation to
the hand, past hand injuries, nervous system
disorders, diabetes, or Raynaud’s Disease should
not use this tool. If you feel any medical or
physical symptoms related to vibration (such as
tingling, numbness, and white or blue fingers),
seek medical advice as soon as possible.
2. Do not smoke during use. Nicotine reduces
the blood supply to the hands and fingers,
increasing the risk of vibration-related injury.
3. Wear suitable gloves to reduce the
vibration effects on the user.
4. Use tools with the lowest vibration when there
is a choice between different processes.
5. Include vibration-free periods each day of work.
6. Grip tool as lightly as possible (while still keeping
safe control of it). Let the tool do the work.
7. To reduce vibration, maintain the tool as
explained in this manual. If any abnormal
vibration occurs, stop use immediately.
%GH!6%I_6G6%NOGIMQ;INKOG1
Page 8 =&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1 Item 63023
GH=6IJ KL6MHINKO PHNOI6OHO;6G6IQL
S(&'89"83
IK%LM6!6OI%6U6;IMN;%G_K;Y%HOV%V6HI_%=MKP%
NO;KMM6;I%SMKQOVNOS%RNM6%;KOO6;INKO-%
;.*4X%)"$.%,%>',7"2"*9%*7*4$("4",8%"2%<&'%,(*%"8%9&'+$%,#%$&%).*$.*(%$.*%&'$7*$%"#%/(&/*(7<%
3(&'89*91%%V&%8&$%5&9"2<%$.*%/&)*(%4&(9%/7'3%/(&W"9*9%)"$.%$.*%$&&71%%O*W*(%(*5&W*%$.*%
3(&'89"83%/(&83%2(&5%$.*%/7'31%%V&%8&$%'#*%$.*%$&&7%"2%$.*%/&)*(%4&(9%&(%/7'3%"#%9,5,3*91%%N2%9,5,3*9?%
.,W*%"$%(*/,"(*9%+<%,%#*(W"4*%2,4"7"$<%+*2&(*%'#*1%%N2%$.*%/7'3%)"77%8&$%2"$%$.*%&'$7*$?%.,W*%,%/(&/*(%&'$7*$%
"8#$,77*9%+<%,%>',7"2"*9%*7*4$("4",81
S(&'89*9%I&&7#-%I&&7#%)"$.%I.(**%L(&83%L7'3#
cAL(&83%L7'3%,89%K'$7*$
1. Tools marked with “Grounding Required” have
a three wire cord and three prong grounding
plug. The plug must be connected to a properly
grounded outlet. If the tool should electrically
malfunction or break down, grounding provides
a low resistance path to carry electricity away
from the user, reducing the risk of electric
shock. [G**%cAL(&83%L7'3%,89%K'$7*$1\
2. The grounding prong in the plug is connected
through the green wire inside the cord to the
grounding system in the tool. The green wire
in the cord must be the only wire connected
to the tool’s grounding system and must
never be attached to an electrically “live”
terminal. [G**%cAL(&83%L7'3%,89%K'$7*$1\
3. The tool must be plugged into an appropriate outlet,
properly installed and grounded in accordance
with all codes and ordinances. The plug and outlet
should look like those in the preceding illustration.
[G**%cAL(&83%L7'3%,89%K'$7*$1\
V&'+7*%N8#'7,$*9%I&&7#-%I&&7#%)"$.%I)&%L(&83%L7'3#
K'$7*$#%2&(%dAL(&83%L7'3
1. Tools marked “Double Insulated” do not
require grounding. They have a special
double insulation system which satisfies OSHA
requirements and complies with the applicable
standards of Underwriters Laboratories, Inc.,
the Canadian Standard Association,
and the National Electrical Code.
2. Double insulated tools may be used in either of the
120 volt outlets shown in the preceding illustration.
[G**%K'$7*$#%2&(%dAL(&83%L7'31\
Page 9=&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1Item 63023
GH=6IJKL6MHINKOPHNOI6OHO;6 G6IQL
6Z$*8#"&8%;&(9#
1. Grounded tools require a three
wire extension cord. Double Insulated tools can
use either a two or three wire extension cord.
2. As the distance from the supply outlet increases,
you must use a heavier gauge extension cord.
Using extension cords with inadequately sized wire
causes a serious drop in voltage, resulting in loss
of power and possible tool damage. [G**%I,+7*%H1\
3. The smaller the gauge number of the wire, the
greater the capacity of the cord. For example,
a 14 gauge cord can carry a higher current
than a 16 gauge cord. [G**%I,+7*%H1\
4. When using more than one extension cord
to make up the total length, make sure
each cord contains at least the minimum
wire size required. [G**%I,+7*%H1\
5. If you are using one extension cord for more
than one tool, add the nameplate%amperes
and use the sum to determine the required
minimum cord size. [G**%I,+7*%H1\
6. If you are using an extension cord outdoors, make
sure it is marked with the suffix “W-A” (“W” in
Canada) to indicate it is acceptable for outdoor use.
7. Make sure the extension cord is properly wired
and in good electrical condition. Always replace
a damaged extension cord or have it repaired
by a qualified electrician before using it.
8. Protect the extension cords from sharp objects,
excessive heat, and damp or wet areas.
IHTU6%H-%%M6;KPP6OV6V%PNONPQP%RNM6%
SHQS6%=KM%6eI6OGNKO%;KMVGf%[@dg0dhg%!KUI\
OHP6LUHI6
HPL6M6G
[,$%2'77%7&,9\
6eI6OGNKO%;KMV%
U6OSI_
dDi Dgi EDi @ggi @Dgi
0 – 2.0 18 18 18 18 16
2.1 – 3.4 18 18 18 16 14
3.5 – 5.0 18 18 16 14 12
5.1 – 7.0 18 16 14 12 12
7.1 – 12.0 18 14 12 10 -
12.1 – 16.0 14 12 10 - -
16.1 – 20.0 12 10 - - -
f%T,#*9%&8%7"5"$"83%$.*%7"8*%W&7$,3*%9(&/%$&%2"W*%W&7$#%,$%
@Dgj%&2%$.*%(,$*9%,5/*(*#1
G<5+&7&3<
Double Insulated
!
Volts
k
Alternating Current
H
Amperes
n
0
xxxx/min.
No Load Revolutions per Minute (RPM)
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
safety goggles with side shields.
Read the manual before
set-up and/or use.
WARNING marking
concerning Risk of Fire.
Do not cover ventilation ducts.
Keep flammable objects away.
WARNING marking concerning
Risk of Electric Shock.
Properly connect power cord
to appropriate outlet.
Page 10 =&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1 Item 63023
GH=6IJ KL6MHINKO PHNOI6OHO;6G6IQL
G/*4"2"4,$"&8#
Electrical Rating 120 VAC / 60 Hz / 3 A
No Load Speed 20,000 RPM
Arbor Hole Diameter 3/8″
Max. Accessory Diameter 3″ (76 mm)
G*$'/%A%T*2&(*%Q#*-
%M*,9%$.*%6OINM6%NPLKMIHOI%GH=6IJ%NO=KMPHINKO%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%
5,8',7%"847'9"83%,77%$*Z$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
IK%LM6!6OI%G6MNKQG%NOlQMJ%=MKP%H;;NV6OIHU%KL6MHINKO-%
P,X*%#'(*%$.,$%$.*%L&)*(%G)"$4.0I("33*(%"#%"8%$.*%&22A/&#"$"&8%,89%'8/7'3%$.*%$&&7%
2(&5%"$#%*7*4$("4,7%&'$7*$%+*2&(*%/*(2&(5"83%,8<%/(&4*9'(*%"8%$."#%#*4$"&81
O&$*- For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
H9]'#$"83%$.*%R.**7%S',(9
IK%LM6!6OI%G6MNKQG%NOlQMJ-%V&%8&$%&/*(,$*%$."#%$&&7%)"$.&'$%$.*%R.**7%S',(9%/(&/*(7<%"8#$,77*91
1. Loosen the Wheel Guard Screws.
2. Rotate the Wheel Guard as needed to
shield you during the planned work.
3. Tighten the Wheel Guard Screws securely.
4. Check the Wheel Guard to ensure
it is firmly in place. Adjust if
necessary before proceeding.
Page 11=&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1Item 63023
GH=6IJKL6MHINKOPHNOI6OHO;6 G6IQL
='84$"&8#
R.**7%S',(9
I("33*(
;'$$"83%R.**7
[#&79%#*/,(,$*7<\
R.**7%S',(9%G4(*)
M*#*$%T'$$&8
I("33*(%U&4X
Page 12 =&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1 Item 63023
GH=6IJ KL6MHINKO PHNOI6OHO;6G6IQL
K/*(,$"83%N8#$('4$"&8#
%M*,9%$.*%6OINM6%NPLKMIHOI%GH=6IJ%NO=KMPHINKO%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%
5,8',7%"847'9"83%,77%$*Z$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
I&&7%G*$%Q/
IK%LM6!6OI%G6MNKQG%NOlQMJ%=MKP%H;;NV6OIHU%KL6MHINKO-%
P,X*%#'(*%$.,$%$.*%L&)*(%G)"$4.0I("33*(%"#%"8%$.*%&22A/&#"$"&8%,89%'8/7'3%$.*%$&&7%
2(&5%"$#%*7*4$("4,7%&'$7*$%+*2&(*%/*(2&(5"83%,8<%/(&4*9'(*%"8%$."#%#*4$"&81
N8#$,77"83%cm%;'$$"83%R.**7
1. The Cutting Wheel MUST be:
• rated to at least 20,000 RPM.
no larger than 3″ (76 mm) in diameter.
fitted with a 3/8″ round arbor hole.
• suitable for edge grinding, not surface grinding.
• dry and clean.
• proven undamaged by visual inspection.
2. Closely inspect the Cutting Wheel (sold separately)
before mounting. Use Wrench (41) to hold
Spindle (4) in place while using Hex Key (40)
to remove Hex Screw (1) and Flange (2).
3. Insert Cutting Wheel onto Spindle. Use Wrench
to hold Spindle in place. Insert Hex Screw through
Flange and Cutting Wheel and into Spindle.
Wrench-tighten Hex Screw to secure Cutting Wheel
to the Spindle.
RHMONOS-%I&%/(*W*8$%#*("&'#%"8]'(<?%9&%8&$%
&W*($"3.$*8%_*Z%G4(*)1%%KW*($"3.$*8"83%4,8%
9,5,3*%$.*%).**7?%4,'#"83%).**7%2,"7'(*1
_*Z%G4(*)%[@\
R.**7%S',(9%[c\
;'$$"83%R.**7%
[#&79%#*/,(,$*7<\
G/"897*%[h\
=7,83*%[d\
="3'(*%H-%%N8#$,77"83%R.**7
Page 13=&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1Item 63023
GH=6IJKL6MHINKOPHNOI6OHO;6 G6IQL
R&(X/"*4*%,89%R&(X%H(*,%G*$%Q/
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Route the power cord along a safe route
to reach the work area without creating a
tripping hazard or exposing the power cord to
possible damage. The power cord must
reach the work area with enough extra length
to allow free movement while working.
3. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
4. There must not be hazardous objects, such
as utility lines or foreign objects, nearby
that will present a hazard while working.
5. You must use personal safety equipment including,
but not limited to, ANSI-approved eye and hearing
protection, as well as heavy-duty work gloves.
6. Before beginning work, provide for sparks
and debris that will fly off the work surface.
H+(,#"W*%;'$$"83A&22%N8#$('4$"&8#
IK%LM6!6OI%G6MNKQG%NOlQMJ-%%S("/%$.*%$&&7%2"(57<%"8%+&$.%.,89#1
1. Make sure that the Trigger is in the off-
position, then plug in the tool.
2. Press forward on the Trigger Safety to release
Trigger. Squeeze the Trigger to start the tool.
3. For continuous operation squeeze the Trigger and
push the Trigger Lock to lock the tool on.
To disengage the Trigger Lock and allow the tool to
turn off, squeeze the Trigger once and then release.
4. Allow the tool to come up to full speed
before touching the work material.
5. Apply the wheel to the work material, allowing
the tool to operate at full speed.
If the tool bogs down, use lighter pressure.
6. When finished, release the Trigger to stop the tool.
7. IK%LM6!6OI%H;;NV6OIG?%H=I6M%QG6-%
Turn off the tool.
RHMONOSn%%H77&)%$.*%$&&7%$&%4&5*%$&%,%
4&5/7*$*%#$&/%+*2&(*%#*$$"83%"$%9&)81
Unplug the tool. Clean, then store the
tool indoors out of children’s reach.
Page 14 =&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1 Item 63023
GH=6IJ KL6MHINKO PHNOI6OHO;6G6IQL
P,"8$*8,84*%,89%G*(W"4"83
%L(&4*9'(*#%8&$%#/*4"2"4,77<%*Z/7,"8*9%"8%$."#%5,8',7%5'#$%
+*%/*(2&(5*9%&87<%+<%,%>',7"2"*9%$*4.8"4",81
IK%LM6!6OI%G6MNKQG%NOlQMJ%=MKP%H;;NV6OIHU%KL6MHINKO-%
P,X*%#'(*%$.,$%$.*%L&)*(%G)"$4.0I("33*(%"#%"8%$.*%&22A/&#"$"&8%,89%'8/7'3%$.*%$&&7%
2(&5%"$#%*7*4$("4,7%&'$7*$%+*2&(*%/*(2&(5"83%,8<%/(&4*9'(*%"8%$."#%#*4$"&81
IK%LM6!6OI%G6MNKQG%NOlQMJ%=MKP%IKKU%=HNUQM6-%
V&%8&$%'#*%9,5,3*9%*>'"/5*8$1%%N2%,+8&(5,7%8&"#*%&(%W"+(,$"&8%&44'(#?%
.,W*%$.*%/(&+7*5%4&((*4$*9%+*2&(*%2'($.*(%'#*1
;7*,8"83?%P,"8$*8,84*?%,89%U'+("4,$"&8
1. T6=KM6%6H;_%QG6? inspect the general
condition of the tool. Check for:
• loose hardware
• misalignment or binding of moving parts
• damaged cord/electrical wiring
• cracked or broken parts
• any other condition that may
affect its safe operation.
2. H=I6M%QG6? wipe external surfaces
of the tool with clean cloth.
3. Periodically, wear ANSI-approved safety goggles
and NIOSH-approved breathing protection
and blow dust and grit out of the motor
vents using dry compressed air.
4. RHMONOSn%%N2%$.*%#'//7<%4&(9%&2%$."#%
/&)*(%$&&7%"#%9,5,3*9?%"$%5'#$%+*%(*/7,4*9%
&87<%+<%,%>',7"2"*9%#*(W"4*%$*4.8"4",81
H44*##&(<%G$&(,3*%,89%_,897"83
1. Handle accessories carefully to prevent
dropping or bumping. Do not use wheels
that have been dropped or bumped.
2. Store accessories in shelves, racks, boxes,
or drawers. Keep storage area dry and
above freezing. Any grinding or cut-off
wheels exposed to humidity or freezing
temperatures must not be used.
Page 15=&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1Item 63023
GH=6IJKL6MHINKOPHNOI6OHO;6 G6IQL
I(&'+7*#.&&$"83
L(&+7*5 L&##"+7*%;,'#*# U"X*7<%G&7'$"&8#
Tool will not start. 1. Cord not connected.
2. No power at outlet.
3. Tool’s thermal reset
breaker tripped (if equipped).
4. Internal damage or wear. (Carbon
brushes or switch, for example.)
1. Check that cord is plugged in.
2. Check power at outlet.
If outlet is unpowered, turn off tool and
check circuit breaker. If breaker is tripped,
make sure circuit is right capacity for
tool and circuit has no other loads.
3. Turn off tool and allow to cool.
Press reset button on tool.
4. Have technician service tool.
Tool operates slowly. 1. Excess pressure applied to workpiece.
2. Power being reduced by long or small
diameter extension cord.
1. Decrease pressure, allow
tool to do the work.
2. Eliminate use of extension cord.
If an extension cord is needed, use
one with the proper diameter for
its length and load. See Extension
Cords in GROUNDING section.
Performance
decreases over time.
Carbon brushes worn or damaged. Have qualified technician replace brushes.
Excessive noise
or rattling.
Internal damage or wear.
(Carbon brushes or bearings, for example.)
Have technician service tool.
Overheating. 1. Forcing tool to work too fast.
2. Blocked motor housing vents.
3. Motor being strained by long or
small diameter extension cord.
1. Allow tool to work at its own rate.
2. Wear ANSI-approved safety goggles
and NIOSH-approved dust mask/
respirator while blowing dust out of
motor using compressed air.
3. Eliminate use of extension cord.
If an extension cord is needed,
use one with the proper diameter for
its length and load. See Extension
Cords in GROUNDING section.
Tool does not
grind, sand or
brush effectively.
1. Accessory loose.
2. Accessory damaged, worn or
wrong type for the material.
1. Confirm accessory arbor is correct
and Outer Flange/Arbor Nut is tight.
2. Check condition and type of disc accessory.
Use only proper type of disc
accessory in good condition.
% =&77&)%,77%#,2*$<%/(*4,'$"&8#%).*8*W*(%9",38&#"83%&(%#*(W"4"83%
$.*%$&&71%%V"#4&88*4$%/&)*(%#'//7<%+*2&(*%#*(W"4*1
Page 16 =&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1 Item 63023
GH=6IJ KL6MHINKO PHNOI6OHO;6G6IQL
LU6HG6%M6HV%I_6%=KUUKRNOS%;HM6=QUUJ
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Page 17=&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1Item 63023
GH=6IJKL6MHINKOPHNOI6OHO;6 G6IQL
M*4&(9%L(&9'4$^#%G*(",7%O'5+*(%_*(*-%
O&$*- If product has no serial number, record month and year of purchase instead.
O&$*- Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
Page 18 =&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1 Item 63023
GH=6IJ KL6MHINKO PHNOI6OHO;6G6IQL
L,($ V*#4("/$"&8 o$<1
1 Screw M5 x 14 1
2 Flange 1
3 Wheel Guard 1
4 Spindle 1
5 Gear Box 1
6 Bearing 6000 1
7 Screw M4 x 8 2
8 Rotor 1
9 Dust Ring 1
10 Bearing 607 1
11 Bearing Sleeve 1
12 Baffle 1
13 Stator 1
14 Terminal 2.8 mm 6
15 Motor Housing 1
16 Spring 2
17 Carbon Brush 2
18 Screw ST3 x 8 2
19 Brush Holder 2
20 Pin 1
21 Torsion Spring 1
L,($ V*#4("/$"&8 o$<1
22 Trigger 1
23 Trigger Safety 1
24 Left Rear Housing 1
25 Power Cord Sheath 1
26 Power Cord 1
27 Trigger Lock 1
28 Spring 2
29 Power Cord Clamp 1
30 Screw ST4 x 14 1
31 Circuit Overload Switch 1
32 Switch 1
33 Screw ST3 x 18 2
34 Screw ST4 x 30 2
35 Right Rear Housing 1
36 Screw ST4 x 75 2
37 Screw M4 x 14 2
38 Wheel Guard Clamp 1
39 Screw ST4.2 x 22 4
40 Hex Key 1
41 Wrench 1
L,($#%U"#$%,89%V",3(,5
L,($#%U"#$
Page 19=&(%$*4.8"4,7%>'*#$"&8#?%/7*,#*%4,77%@ABBBABCCADEFE1Item 63023
GH=6IJKL6MHINKOPHNOI6OHO;6 G6IQL
H##*5+7<%V",3(,5
dCDh@%H3&'(,%M&,9%%p%%;,7,+,#,#?%;H%F@cgd%%p%%@ABBBABCCADEFE
U"5"$*9%Fg%V,<%R,((,8$<
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability
standards, and warrants to the original purchaser that this product is free from defects in materials
and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion
may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Chicago Electric Item 63023 Owner's manual

Category
Power tools
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI