LAN HUB
CUSTOM
CAT5E CABLE
CAT5E CABLE
CAT5E CABLE
CAT5E
FULLY-WIRE
CABLE
VISIT US ON THE WEB @
WWW.QVS.COM
Applications Guide:
This RJ45 Y Splitter has multiple applications including
a) When used as RJ45 port splitter, only one connection must
be active at a time. This is not an ethernet switch/hub splitter.
b) The RJ45 female port accommodate both RJ45 and RJ11/12
connection. When used as phone splitter, the phone wall jack
must accommodate both RJ45/RJ12 connection.
c) When two C5YMFF are used in pair, it will allow two network
connection over one cable drop (see reverse for instruction).
This RJ45 splitter cable have straight-thru pin-out configuration.
If you have any question or need any help with this cable, please go to
http://www.qvs.com/support/supportform.asp
You can also call us at (702) 228-3670 Monday to Friday,
from 9:00am - 5:00pm PST or email us at [email protected].
CAT5E/TELCO
RJ45/350MHZ SPLITTER CABLE
(SKU: C5YMFF) MANUAL V2
Network Pair Splitter Instruction Guide:
Custom
RJ45 Wiring Pin-Out:
CAT5e Cable
RJ45 (Hub)
1
2
3
4
5
6
7
8
RJ45 (C5YMFF)
4
5
7
1
2
8
3
6
REQUIREMENTS:
This application requires 2pcs of C5YMFF, 2pcs of
standard ethernet cable and 2pc custom ethernet cable.
All standard ethernet cable and in-wall CAT5e
cable must be fully-wired & have straight-thru
pin-out with all 8-wires connected.
Make sure to properly connect the custom ethernet
patch cord.
CAT5E
WALL OUTLET
CAT5E
WALL OUTLET
You must have LAN/ethernet knowledge and tools like RJ45 crimp tool &
LAN wiring tester. Otherwise, please consult your LAN/network administrator.
CUSTOM
CAT5E CABLE
-
1
