Dell PowerVault 51F (8P Fibre Channel Switch) User guide

Type
User guide

The Dell PowerVault 51F (8P Fibre Channel Switch) offers reliable connectivity for storage area networks (SANs) with eight 2 Gbps Fibre Channel ports, allowing efficient data transfer and consolidation. Its hot-swappable and redundant components enhance system uptime, making it ideal for mission-critical applications. Advanced features like load balancing, zoning, and Quality of Service (QoS) enable optimized performance and data integrity. With a compact 1U design, the Dell PowerVault 51F is well-suited for space-constrained environments.

The Dell PowerVault 51F (8P Fibre Channel Switch) offers reliable connectivity for storage area networks (SANs) with eight 2 Gbps Fibre Channel ports, allowing efficient data transfer and consolidation. Its hot-swappable and redundant components enhance system uptime, making it ideal for mission-critical applications. Advanced features like load balancing, zoning, and Quality of Service (QoS) enable optimized performance and data integrity. With a compact 1U design, the Dell PowerVault 51F is well-suited for space-constrained environments.

P/N 4049T Rev. A00 August 1999



 

This document explains how to install a gigabit interface converter (GBIC) module in a
Dell PowerVault 50F or 51F Fibre Channel switch.
NOTES: You can insert GBIC modules into a switch while the switch is on.
GBIC modules use standard SC connectors or high-speed serial data connectors
(HSSDC).
To install a GBIC module in a PowerVault 50F or 51F, perform the following steps:
1. If you are installing a non-IBM
®
GBIC module, perform only steps 2 and 3.
If you are installing an IBM GBIC module, ensure that the locking bar on the front
of the GBIC module is pushed to the right side of the module.


2. Insert the GBIC module into the appropriate port.
3. Press the GBIC module until its connector is firmly seated.
4049Tam0.fm Page 1 Thursday, October 7, 1999 9:35 AM
 !
4. If you are installing an IBM GBIC module, lock the GBIC module in the port by
pushing the locking bar to the left side of the GBIC module.
____________________
Information in this document is subject to change without notice.
© 1999 Dell Computer Corporation. All rights reserved. Printed in the U.S.A.
Trademarks used in this text: Dell, PowerVault, and the DELL logo are trademarks of Dell
Computer Corporation; IBM is a registered trademark of IBM Corporation. Other trademarks and
trade names may be used in this document to refer to either the entities claiming the marks and
names or their products. Dell Computer Corporation disclaims any proprietary interest in
trademarks and trade names other than its own.
4049Tam0.fm Page 2 Thursday, October 7, 1999 9:35 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Dell PowerVault 51F (8P Fibre Channel Switch) User guide

Type
User guide

The Dell PowerVault 51F (8P Fibre Channel Switch) offers reliable connectivity for storage area networks (SANs) with eight 2 Gbps Fibre Channel ports, allowing efficient data transfer and consolidation. Its hot-swappable and redundant components enhance system uptime, making it ideal for mission-critical applications. Advanced features like load balancing, zoning, and Quality of Service (QoS) enable optimized performance and data integrity. With a compact 1U design, the Dell PowerVault 51F is well-suited for space-constrained environments.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI