Alcatel OneTouch Moveband Series Moveband MB12 Quick start guide
- Type
- Quick start guide
Quick Start Guide
CJB1J10ALAAC
2
Device
MOVEBAND
LED display
Note:
• Ensure that the strap is kept clean. Contact with
contaminants,suchasdustanddye,cancausestainson
thestrapthatmaynotbeabletobefullyremoved.
3
Geng started
Charging the baery:
Charge the baery before using it for the rst me or
when it has been unused for extended periods.
1. Pull the strap away from your MOVEBAND device.
2. Take out the charger dock and ensure that the pins
in the charging dock are aligned with the pins on the
back cover of your MOVEBAND device.
4
3. Place the MOVEBAND on the charger dock with the
charging terminals facing each other. Once connected,
the LED will keep lighng.
4. Aer fully charging your MOVEBAND, disconnect it
from the charger dock. Unplug the charger from the
electric socket or computer.
Notes:
• Use only TCL Communicaon Ltd. approved chargers
and cables. Unapproved chargers or cables can cause
thebaerytoexplodeordamagethedevice.
• Donotexposethechargertowater.
5
Wearing the MOVEBAND
Open the clasp and place MOVEBAND around your wrist.
Fit the strap to your wrist and then insert the pin into an
adjustment hole.
Notes:
• Donotbendthestrapexcessively.Doingsomaydamage
thedevice.
• Oponalstrapsareavailableforyourpreference.
6
Pairing with your phone
Step 1: Installing the ALCATEL MOVEBAND app.
You can download and install the ALCATEL MOVEBAND
app in the following ways:
• Search “ALCATEL MOVEBAND” in the Google Play
Store (For Android).
• Search “ALCATEL MOVEBAND” in the App Store
(For IOS).
• Scan the following QR code.
Step 2: Connecng MOVEBAND to your phone via
Bluetooth.
Pairing mode starts when your MOVEBAND is turned on.
Turn on Bluetooth on your phone or in the ALCATEL
MOVEBAND app. Search for and connect to your
MOVEBAND.
7
When MOVEBAND is successfully connected with phone
via Bluetooth, the LED will light up.
Monitoring your tness acvies:
• Set your tness goal on the ALCATEL MOVEBAND
app.
• You can view your tness data on the ALCATEL
MOVEBAND app.
Note: When you achieve a tness goal, your MOVEBAND
will vibrate and 3 LEDs will ash from le to right 3 mes.
Monitoring your sleep
• Wear your MOVEBAND to monitor your sleep status.
• You can set a smart alarm using the ALCATEL
MOVEBAND app.
8
Music and Camera control
Set “Music control” or “Camera control” in the ALCATEL
MOVEBAND app. Wear your MOVEBAND to enable the
following funcons:
Music control
• Face your palm down and keep sll for 1s. Flip twice to
start/pause the music.
• Face your palm down and keep sll for 1s. Flip once
and back again to play the next song.
Camera control
• Face your palm down and keep sll for 1s. Flip twice
to start the camera.
• Face your palm down and keep sll for 1s. Flip once
and back again to take a photo.
9
Reminders
Your MOVEBAND will vibrate when there is an incoming
call, message, mail or calendar reminder. For incoming
calls, the MOVEBAND will vibrate up to 5 mes. Tap
twice to stop it.
LED status:
Tap your wristband twice to check the baery status.
Charging
Process LED Descripon
100%
3 LED stays on constantly
67–99 %
The rst two LEDs stay on
constantly, the third ashes.
33–67 %
The rst LED stays on
constantly, the second ashes.
0–33 %
The rst LED ashs
10
LED low baery indicator
Level LED Descripon
10 %
The rst LED ashes 3 mes
and vibrates.
5%
The rst LED ashes 3 mes
and vibrates.
More informaon
For more informaon, please refer to the online help in
the ALCATEL MOVEBAND app or www.alcatel-mobile.
com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Alcatel OneTouch Moveband Series Moveband MB12 Quick start guide
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Alcatel BT Smartband User manual
-
-
Alcatel MOVEBAND Owner's manual
-
-
Alcatel Move Band MB10 Quick start guide
-
-
-
-
-
Alcatel SmartWatch User manual