2. Alcatel
  3. Moveband MB12

Alcatel Moveband MB12 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Alcatel Moveband MB12 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Quick Start Guide
CJB1J10ALAAC
2
Device
MOVEBAND
LED display
Note:
• Ensure that the strap is kept clean. Contact with
contaminants,suchasdustanddye,cancausestainson
thestrapthatmaynotbeabletobefullyremoved.
3
Geng started
Charging the baery:
Charge the baery before using it for the rst me or
when it has been unused for extended periods.
1. Pull the strap away from your MOVEBAND device.
2. Take out the charger dock and ensure that the pins
in the charging dock are aligned with the pins on the
back cover of your MOVEBAND device.
4
3. Place the MOVEBAND on the charger dock with the
charging terminals facing each other. Once connected,
the LED will keep lighng.
4. Aer fully charging your MOVEBAND, disconnect it
from the charger dock. Unplug the charger from the
electric socket or computer.
Notes:
• Use only TCL Communicaon Ltd. approved chargers
and cables. Unapproved chargers or cables can cause
thebaerytoexplodeordamagethedevice.
• Donotexposethechargertowater.
5
Wearing the MOVEBAND
Open the clasp and place MOVEBAND around your wrist.
Fit the strap to your wrist and then insert the pin into an
adjustment hole.
Notes:
• Donotbendthestrapexcessively.Doingsomaydamage
thedevice.
• Oponalstrapsareavailableforyourpreference.
6
Pairing with your phone
Step 1: Installing the ALCATEL MOVEBAND app.
You can download and install the ALCATEL MOVEBAND
app in the following ways:
• Search “ALCATEL MOVEBAND” in the Google Play
Store (For Android).
• Search “ALCATEL MOVEBAND” in the App Store
(For IOS).
• Scan the following QR code.
Step 2: Connecng MOVEBAND to your phone via
Bluetooth.
Pairing mode starts when your MOVEBAND is turned on.
Turn on Bluetooth on your phone or in the ALCATEL
MOVEBAND app. Search for and connect to your
MOVEBAND.
7
When MOVEBAND is successfully connected with phone
via Bluetooth, the LED will light up.
Monitoring your tness acvies:
• Set your tness goal on the ALCATEL MOVEBAND
app.
• You can view your tness data on the ALCATEL
MOVEBAND app.
Note: When you achieve a tness goal, your MOVEBAND
will vibrate and 3 LEDs will ash from le to right 3 mes.
Monitoring your sleep
• Wear your MOVEBAND to monitor your sleep status.
• You can set a smart alarm using the ALCATEL
MOVEBAND app.
8
Music and Camera control
Set “Music control” or “Camera control” in the ALCATEL
MOVEBAND app. Wear your MOVEBAND to enable the
following funcons:
Music control
• Face your palm down and keep sll for 1s. Flip twice to
start/pause the music.
• Face your palm down and keep sll for 1s. Flip once
and back again to play the next song.
Camera control
• Face your palm down and keep sll for 1s. Flip twice
to start the camera.
• Face your palm down and keep sll for 1s. Flip once
and back again to take a photo.
9
Reminders
Your MOVEBAND will vibrate when there is an incoming
call, message, mail or calendar reminder. For incoming
calls, the MOVEBAND will vibrate up to 5 mes. Tap
twice to stop it.
LED status:
Tap your wristband twice to check the baery status.
Charging
Process LED Descripon
100%
3 LED stays on constantly
67–99 %
The rst two LEDs stay on
constantly, the third ashes.
33–67 %
The rst LED stays on
constantly, the second ashes.
0–33 %
The rst LED ashs
10
LED low baery indicator
Level LED Descripon
10 %
The rst LED ashes 3 mes
and vibrates.
5%
The rst LED ashes 3 mes
and vibrates.
More informaon
For more informaon, please refer to the online help in
the ALCATEL MOVEBAND app or www.alcatel-mobile.
com
/