MQ Multiquip GA6HZR Operating instructions

Category
Power generators
Type
Operating instructions

The MQ Multiquip GA6HZR is a versatile generator that can provide reliable power for various applications. It features a powerful engine that delivers consistent performance, making it suitable for both residential and commercial use. With its multiple outlets, including a 120V 20A GFCI duplex receptacle and a 120/240V 30A twist-lock receptacle, the GA6HZR can accommodate a wide range of tools and equipment. Additionally, its compact design and portability make it easy to transport and store, ensuring convenience during operation.

The MQ Multiquip GA6HZR is a versatile generator that can provide reliable power for various applications. It features a powerful engine that delivers consistent performance, making it suitable for both residential and commercial use. With its multiple outlets, including a 120V 20A GFCI duplex receptacle and a 120/240V 30A twist-lock receptacle, the GA6HZR can accommodate a wide range of tools and equipment. Additionally, its compact design and portability make it easy to transport and store, ensuring convenience during operation.

Form 29034 (11/99)
© COPYRIGHT 2008, MULTIQUIP INC.
GA-6HZR Generator
Receptacle Modification Instructions
Replaces 3-prong receptacle (P/N 06018111032)
with 4-prong receptacle (P/N 0601814010)
Please read the entire modification instructions
before removing the receptacle from the
generator. Modification and wiring diagrams are
provided within the instruction sheet for you
reference. ONLY have qualified service
personnel perform this modification.
Atlanta • Boise • Dallas • Houston • Newark
Montreal, Canada • Manchester, UK
MULTIQUIP INC.
POST OFFICE BOX 6254 • CARSON, CA 90749
310-537-3700 • 800-421-1244 • FAX: 310-537-3927
E-MAIL: mq@multiquip.com • WWW: multiquip.com
.
d
e
o
s
PurposePurpose
PurposePurpose
Purpose
This modification procedure is intended only for those
customers who prefer a 4-prong receptacle in place of the
OEM 3-prong receptacle.
Unless you have this requirement no changes should
be made to the generator.
Parts
NO. P/N PART NAME QTY.
1 ....... 0601814010 ............. Receptacle L14-20R .................... 1
125/250, 20A
2 ....... N/A ......................... #10 AWG Wire (White) ................ 8 in.
3 ....... N/A ......................... #10-8 Terminal Lug ...................... 2
Tools
Ratchet set with 8 mm socket
Crimping Tool
Screw Driver, Flat Blade
ProcedureProcedure
ProcedureProcedure
Procedure
1. Set the portable generator on a suitable workbench
where it will not slide or move around.
2. Make sure the generator is off and that no electrical
devices are connected to it.
3. Remove the the four bolts (Figure 1) that secure the
control box panel, then pull the control box panel
downward very slowly, being careful not to distrub any
electrical connections.
4. Remove the 2 screws that hold the existing L6-20R
receptacle in place. Remove all the wires connected to
this receptacle. Mark the wires if necessary, they will be
connected to the same terminals on the new receptacle
(L14-20R).
5. Install the new L14-20R receptacle in place of the old
L6-20R receptacle.
6. Connect the wires from the old receptacle to the new
receptacle using the wiring diagram on the last page of
this modification procedure. Torque all receptacle
terminals to approximately 10-14 in.-lbs.
7. Connect a #10 AWG WHITE wire (NEUTRAL) from
terminal X of the adjacent L5-30R receptacle to terminal
W on the new L14-20R receptacle. Use Figures 2 and 3
to aid you in adding this wire.
8. Place the control box panel back onto the generator
and reinstall the four bolts (Figure 1) that secure the
control box panel.
Figure 1. GA-6HZR Generator
Figure 2. Receptacles Rear View Wiring
Figure 3. GA-6HZR Wiring Diagram
PAGE 2 OF 4
Atlanta • Boise • Dallas • Houston • Newark
Montreal, Canada • Manchester, UK
MULTIQUIP INC.
POST OFFICE BOX 6254 • CARSON, CA 90749
310-537-3700 • 800-421-1244 • FAX: 310-537-3927
E-MAIL: mq@multiquip.com • WWW: multiquip.com
  • Page 1 1
  • Page 2 2

MQ Multiquip GA6HZR Operating instructions

Category
Power generators
Type
Operating instructions

The MQ Multiquip GA6HZR is a versatile generator that can provide reliable power for various applications. It features a powerful engine that delivers consistent performance, making it suitable for both residential and commercial use. With its multiple outlets, including a 120V 20A GFCI duplex receptacle and a 120/240V 30A twist-lock receptacle, the GA6HZR can accommodate a wide range of tools and equipment. Additionally, its compact design and portability make it easy to transport and store, ensuring convenience during operation.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI