2. Fashion & style
  3. Watches
  4. Casio
  5. G AD BLK DIAL SS BLT

Casio G AD BLK DIAL SS BLT, AQ-230A-1DMQYES, AQ-230GA-9DMQYES, G ANA DIGI GP BLT, Men's Gold Stainless Steel Bracelet Watch, Silver Stainless Steel Bracelet Watch User manual

  • Hello! I am an AI chatbot trained to assist you with the Casio G AD BLK DIAL SS BLT User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Technical Enquiry/ Seng Assistance: 020 8450 9131 email: uk_help@casio.co.uk
2534361
Water Resistant
Daily Alarm
Stopwatch
Dual Time
Stop Watch
Elapsed time, split time and final time are
measured with 1/100-sec accuracy.
To Measure Elapsed Time:
Press button C to start the stopwatch, Press C to stop the stopwatch. Hold down
Button C until the stopwatch is cleared to 00:00 00
To measure cumulative elapsed time:
Press C to start the stopwatch, Press C to stop the stopwatch. Press C again to
resume timing from the time shown on the display. You can repeat steps 2 and
3 as many times as you like. Hold down Button C until the stopwatch is cleared
to 00:00 00
Alarm
Allows you to specify the hour, minutes, day
and month of the alarm.
In Alarm Mode, Hold down Button C to set hours and minutes. Press A to ad-
vance the alarm setting by each hour. Press B to set minute digits, each Press of
A advances the alarm setting by 1 minute. Press B again to exit setting screen
once hour and minute digits have been set. *If button C is pressed, the watch
reverts to the regular timekeeping mode. (Quick digit advance) when button A is
pressed for more than 2 seconds, the digit advances quickly. When released,
digit advance will stop.
Water Resistant
Suitable to resist minor splashing. Water Resistant classification DIN 8310 / ISO 2281 is only resistant to minor
splashing.
Dual Time
Simultaneous display of the current time in
two different time zones . The Dual Time
function lets you set a second digital time
that operates independently of the current
analogue and digital times.
Hold down Button C while in Dual Time mode until the hour digits start to flash
on the display. The hour digits flash because they are selected. Press C to
change the selection in the following sequence.;
Press B to increase the selected digits. Holding down Button B changes the se-
lections in high speed. While the 12/24-hour format hour setting is selected.
Press B to switch between the two formats. After you set the time, Press C to
C
Specifications
A
Model variations may differ in appearance from the example above.
AQ-230GA-9DMQYES
Analogue Display
B
Mode Indicator
Stopwatch Button
/