Elo TouchSystems SW601960 User manual

Elo TouchSystems
Brand
Elo TouchSystems
Model
SW601960
Category
Public displays
Type
User manual

This manual is also suitable for

USER MANUAL
Elo Touch Solutions
3243L Touchmonitors
4243L Touchmonitors
SW601960 Rev B
User Manual: 43L Series
SW601960 Rev B, Page 2 of 24
Copyright © 2014 Elo Touch Solutions, Inc. All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language or computer language, in any form or by any means, including, but not limited to, electronic,
magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.
Disclaimer
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Afffiliates
(collectively "Elo") makes no representations or warranties with respect to the contents herein, and specifically
disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of Elo to
notify any person of such revisions or changes.
Trademark Acknowledgments
AccuTouch, CarrollTouch, Elo, Elo (logo), Elo Touch, Elo Touch Solutions, Elo TouchSystems, IntelliTouch, iTouch,
SecureTouch, TouchTools and VuPoint are trademarks of Elo and its Affiliates. Windows is a trademark of Microsoft
Corporation.
User Manual: 43L Series
SW601960 Rev B, Page 3 of 24
Table of Contents
Chapter 1: Introduction
...........................................................................................4
Chapter 2: Installation
.............................................................................................5
Chapter 3: Mounting
................................................................................................7
Chapter 4: Operation
............................................................................................. 10
Chapter 5: Technical Support
............................................................................. 15
Chapter 6: Safety & Maintenance
...................................................................... 17
Chapter 7: Regulatory Information
................................................................... 19
Chapter 8: Warranty Information
....................................................................... 23
User Manual: 43L Series
SW601960 Rev B, Page 4 of 24
Chapter 1: Introduction
Product Description
Your new touchmonitor combines the reliable performance of Elo Touch Solutions touch
products with the latest developments in touch technology and display design. This combination
of features creates a natural flow of information between a user and the touchmonitor.
This widescreen touchmonitor incorporates a 24-bit color, active matrix thin-film-transistor LCD
panel to provide high quality display performance. Its Full HD resolution of 1920x1080 is
suitable for displaying graphics and images. Its LED backlight significantly reduces power
consumption and eliminates mercury (compared to CCFL-backlit panels). Other features that
enhance this LCD monitor’s performance are Plug & Play compatibility and on-screen display
(OSD) controls.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user manual to
maximize the life of your unit and prevent risks to user safety. See the Safety & Maintenance
chapter for more information.
This manual contains information that is important for the proper setup and maintenance of the
unit. Before setting up and powering on your new touchmonitor, read through this manual,
especially the Installation, Mounting, and Operation chapters.
User Manual: 43L Series
SW601960 Rev B, Page 5 of 24
Chapter 2: Installation
Unpacking the Touchmonitor
Open the carton and verify that the following items are present:
• Touchmonitor
• User Manuals CD
• Mounting brackets
• Quick Install Guide
• VGA cable
• HDMI cable (ETX243L-XXWA models only)
• DVI cable (ETX243L-XXAA models only)
• USB cable (not available for ETX243L-0NXX models)
• International power cables
• Japanese language regulatory information pamphlet
User Manual: 43L Series
SW601960 Rev B, Page 6 of 24
Connector Panel & Interfaces
Note: DVI or HDMI are available on certain models only.
Touchmonitor Connections
1. Connect a video cable from your host computer to the monitor. For VGA cables, tighten the
video cables screws for best performance.
2. Connect the USB touch cable between the monitors USB connector and your PC’s USB port.
(Not applicable for No Touch models)
3. Connect the power cable to the monitors input power jack and the AC power outlet.
4. The touchmonitor ships in the ON state.
User Manual: 43L Series
SW601960 Rev B, Page 7 of 24
Chapter 3: Mounting
General Mounting Information
The OSD text can be rotated between portrait and landscape mode through the OSD menu to
better suit your mounting orientation.
Side Bracket Mount
Threaded holes are provided on the sides of the monitor for mounting using the provided
brackets.
ET3243L
User Manual: 43L Series
SW601960 Rev B, Page 8 of 24
For 4243L monitors:
User Manual: 43L Series
SW601960 Rev B, Page 9 of 24
Rear VESA Mount
For ET3243L Monitors:
A four-hole 400x200mm mounting pattern for M6 screws is provided on the rear of the monitor.
The VESA FDMI-compliant counting is coded: VESA MIS-F, 400, 200, 6.
For the 4243L Monitor:
A four-hole 400x400mm mounting pattern for M6 screws is provided on the rear of the monitor.
The VESA FDMI-compliant counting is coded: VESA MIS-F, 400, 400, 6.
Refer to www.elotouch.com for dimensional drawings.
User Manual: 43L Series
SW601960 Rev B, Page 10 of 24
Chapter 4: Operation
Power
To turn the touchmonitor on or off, press the touchmonitor power button on the OSD controller
once.
The Power Status LED on the OSD controller functions according to the following table:
TouchMonitor/Computer Module status
LED status
OFF OFF
SLEEP PULSING
ON ON
The system consumes low power when in SLEEP and OFF modes. For detailed power
consumption specifications, refer to technical specifications on the Elo website at
www.elotouch.com.
Touching the screen will bring the attached host PC out of SLEEP mode (similar to moving the
mouse or pressing a keyboard key).
To improve reliability and reduce wasteful power consumption, disconnect the AC power cable
from the monitor when long periods of disuse are planned.
Touch
Your touchmonitor is factory-calibrated and does not require manual calibration (unless the
input video is not fully scaled to the native resolution, or the touch experience needs to be
calibrated to a specific user).
IntelliTouch Plus Touchscreen Technology
When connected to Windows 7 computers, the touchmonitor can report two simultaneous
touches. The IntelliTouch Plus touchscreen can be re-calibrated to your displayed video image,
if needed, through the calibration function in the Elo driver control panel. The driver can be
downloaded from the Elo Touch website.
User Manual: 43L Series
SW601960 Rev B, Page 11 of 24
The IntelliTouch Plus driver will only support multiple monitor if they are all using the IntelliTouch
Plus touchscreen technology.
To use multiple IntelliTouch Plus monitors, double click on the EloConfig desktop shortcut to
open up the Elo Touchscreen Configuration screen.
Select “Calibrate Touch Screen” to calibrate multiple monitors. Follow the steps that popup to
calibrate both touch screens.
Gesture Support
The IntelliTouch Plus touch technology enables several gestures that support single and
multiple contacts. Refer to the Microsoft Website
http://msdn.microsoft.com/en-us/library/dd940543 on the various gestures that are supported in
Windows 7.
User Manual: 43L Series
SW601960 Rev B, Page 12 of 24
Video
A display’s native resolution is its width and height measured in number of pixels. Generally, for
best performance, an image displayed on this monitor will look best when your computer’s
output resolution matches this monitor’s native resolution of 1920 x 1080.
For computer output resolutions at non-native resolutions, the monitor will scale the video to its
panel’s native resolution. This involves stretching or compressing the input image as needed in
the X- and Y-dimensions to fit the display’s native resolution. An unavoidable byproduct of the
scaling algorithms is a loss of fidelity when the computer’s output video image is scaled by the
monitor to fit the display. This loss of fidelity is most apparent when viewing feature-rich images
at close distances (for example images containing small-font text).
Your touchmonitor will likely not require video adjustments. However, for analog VGA video,
variations in video graphic card outputs may require user adjustments through the OSD to
optimize the quality of the touchmonitor’s displayed image. These adjustments are
“remembered” by the touchmonitor. Also, to reduce the need for adjustments for different video
mode timings, the monitor correctly scales and displays some of the video industry’s most
common video timing modes. Refer to the technical specifications for this monitor at
http://www.elotouch.com for a list of these Preset Video Modes.
On-Screen Display (OSD)
Four OSD buttons are located on a wired control box. These can be used to adjust various
display parameters.
User Manual: 43L Series
SW601960 Rev B, Page 13 of 24
The buttons and their functionality are:
Button Function when OSD is not displayed: Function when OSD is displayed:
Menu Display OSD main menu Return to previous OSD menu
Display OSD Brightness submenu
Increase value of selected parameter /
select previous menu item
Display OSD Contrast submenu
Decrease value of selected parameter /
select next menu item
Select Input Select
Select parameter for adjustment /
select submenu to enter
Using the OSD buttons controls an on-screen graphical user interface which displays on top of
your input video, allowing intuitive adjustment of the following display parameters:
Parameter
Available Adjustment
Brightness
Increase/decrease monitor brightness.
Default: maximum
Contrast
Increase/decrease monitor contrast.
Default: best gray-shade performance
Clock
Allows fine adjustments of the panel’s pixel dot clock.
Only applicable for VGA input video
Phase
Allows fine adjustments of the panel’s pixel dot clock phase.
Only applicable for VGA input video
Auto Adjust
Automatically adjusts the system clock to the input analog VGA video signal, affecting
the H-position, V-position, Clock, and Phase menu items.
Only applicable for VGA input video
H-position
Moves the image horizontally on the display in single-pixel increments.
Default: centered.
Only applicable for VGA input video
V-position
Moves the image vertically on the display in single-pixel increments.
Default: centered.
Only applicable for VGA input video
Aspect Ratio
Switches the scaling method between Full Scaling and Maintain Aspect Ratio.
Default: Full Scaling
Full Scaling – scales the X- and Y-dimensions of the input video (up or down as
needed) to the display’s native resolution.
Fill To Aspect Ratio – Assuming a landscape orientation and an input video w
ith aspect
ratio smaller than 1920 x 1080, scales the Y-dimension of the input video (up or down
as needed) to the display’s Y-resolution, and scales the X-dimension to maintain the
input video’s aspect ratio (and fills the rest of the display with equal black bars on the
left and right).
The touchscreen may need recalibration when switching between Aspect Ratio
options.
Sharpness
Adjusts sharpness of the displayed images.
Default: no sharpness adjustment
Only applicable at non-native input video resolutions
User Manual: 43L Series
SW601960 Rev B, Page 14 of 24
Color
Temperature
Selects the display’s color temperature. The available color temperatures are 9300K,
7500K, 6500K, 5500K, and User Defined. If the User Defined option is selected, the
user can change the color temperature by changing individual R, G, and B gains on a
scale from 0 to 100.
Default: User Defined with R, G, and B all set to 100.
OSD
H-Position
Adjusts the horizontal location of the OSD menus on the display
Default: centered.
OSD
V-Position
Adjusts the vertical location of the OSD menus on the display.
Default: centered.
OSD Timeout
Adjusts how long a period of OSD button inactivity the touchmonitor will wait before
closing the OSD. The adjustable range is between 5 and 60 seconds.
Default: 15 seconds
OSD
Language
Selects which language the OSD information is displayed in. The available languages
are: English, French, Italian, German, Spanish, Simplified Chinese, Traditional
Chinese, and Japanese.
Default: English.
OSD Rotation
Selects the touchmonitor mounting orientation between Landscape and Portrait to match your
physical orientation. This adjusts the rotation of the OSD text
Default: Landscape
Recall
Defaults
Selecting “Recall Defaults” restores all factory default settings for OSD-adjustable
parameters (except OSD Language) and for Preset Video Mode timings.
Video Source
The monitor continually scans for active video on the VGA, DVI, and HDMI connectors. This
adjustment selects which of those input ports should be given priority to be displayed.
The options are: VGA Priority, HDMI (for ETX243L-XXWA models) or VGA Priority, DVI Priority
(for ETX243L-XXAA models)
Default: HDMI (for ETX243L-XXWA models) or DVI Priority (for ETX243L-XXAA models)
All touchmonitor adjustments made through the OSD are automatically memorized as soon as
they are entered. This feature saves you from having to reset your choices every time the
touchmonitor is unplugged or powered off and on. If there is a power failure, the touchmonitor
settings will not default to the factory specifications.
OSD and Power Lockouts
Press and hold the “Menu” and “Up” buttons for two seconds to enable/disable the OSD
Locking feature. When the OSD Locking is enabled, pressing any of the Menu, Up, Down, or
Select keys will have no effect on the system.
Press and hold the “Menu” and “Down” buttons for two seconds to enable/disable the Power
Locking feature. When the Power Locking is enabled, pressing the power switch will have no
effect on the system.
User Manual: 43L Series
SW601960 Rev B, Page 15 of 24
Chapter 5: Technical Support
If you are experiencing trouble with your touchmonitor, refer to the following suggestions.
If the problem persists, please contact your local dealer or contact Elo Touch Solutions
Customer Service.
Solutions to Common Problems
Problem Suggested Troubleshooting
The touchmonitor does not respond when
turning on the system
Check that the power cable is properly connected.
Monitor display is dim
Use the OSD to increase the brightness.
Use the OSD to increase the contrast.
Monitor display is blank
If the Power Status LED is blinking, the monitor or
Computer Module may be in SLEEP mode. Press
any key / move the mouse / touch the t
ouchscreen to
see if the image reappears.
Check that the signal source device is turned on.
Check that that there are no loose cable connections.
Monitor displays an “Out Of Range”
message
Adjust your computer’s resolution/timing mode to be
within the allowable timing ranges specified for your
touchmonitor (see website for specifications)
Monitor display image looks strange
Adjust your computer’s resolution/timing mode to be
within the allowable timing ranges specified for your
touchmonitor (see website for specifications)
Use the Auto Adjust function in the OSD
Touch functionality doesn’t work
Verify your PC has the latest Elo drivers installed.
Perform the calibration routine provided with the
latest Elo drivers.
The OSD buttons or power button does not
respond when pressed
Check to see if the OSD lock or power lock functions
are on
User Manual: 43L Series
SW601960 Rev B, Page 16 of 24
Technical Assistance
Visit www.elotouch.com/products for technical specifications for this device
Visit www.elotouch.com/go/websupport for online self-help.
Visit www.elotouch.com/go/contactsupport for technical support.
See this user manual’s last page for worldwide technical support phone numbers.
User Manual: 43L Series
SW601960 Rev B, Page 17 of 24
Chapter 6: Safety & Maintenance
Safety
To avoid risk of electric shock, follow all safety notices and do not disassemble the
touchmonitor. They are not user-serviceable.
Ensure that your installation is equipped to maintain the specified environmental conditions
listed in the Technical Specifications chapter.
Care and Handling
The following tips will help keep your touchmonitor functioning at an optimal level:
Disconnect the AC power cable before cleaning.
To clean the display unit cabinet, use a clean cloth lightly dampened with a mild detergent.
It is important that your unit remains dry. Do not get liquids on or inside the unit. If liquid does
get inside, have a qualified service technician check it before you power it on again.
Do not wipe the screen with a cloth or sponge that could scratch the surface.
To clean the touchscreen, use window or glass cleaner applied to a clean cloth or sponge.
Never apply the cleaner directly to the touchscreen. Do not use alcohol (methyl, ethyl or
isopropyl), thinner, benzene, or other abrasive cleaners.
User Manual: 43L Series
SW601960 Rev B, Page 18 of 24
Waste Electrical & Electronic Equipment Directive (WEEE)
This product should not be disposed of with household waste. It should be
deposited at a facility that enables recovery and recycling.
User Manual: 43L Series
SW601960 Rev B, Page 19 of 24
Chapter 7: Regulatory Information
I. Electrical Safety Information:
Compliance is required with respect to the voltage, frequency, and current requirements
indicated on the manufacturer’s label. Connection to a different power source than those
specified herein will likely result in improper operation, damage to the equipment or pose a fire
hazard if the limitations are not followed.
There are no operator serviceable parts inside this equipment. There are hazardous voltages
generated by this equipment which constitute a safety hazard. Service should be provided only
by a qualified service technician.
Contact a qualified electrician or the manufacturer if there are questions about the installation
prior to connecting the equipment to mains power.
II. Emissions and Immunity Information
Notice to Users in the United States: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
Notice to Users in Canada: This equipment complies with the Class A limits for radio noise
emissions from digital apparatus as established by the Radio Interference Regulations of
Industrial Canada.
Notice to Users in the European Union: Use only the provided power cords and interconnecting
cabling provided with the equipment. Substitution of provided cords and cabling may
compromise electrical safety or CE Mark Certification for emissions or immunity as required by
the following standards:
This Information Technology Equipment (ITE) is required to have a CE Mark on the
Manufacturer’s label which means that the equipment has been tested to the following
Directives and Standards: This equipment has been tested to the requirements for the CE Mark
User Manual: 43L Series
SW601960 Rev B, Page 20 of 24
as required by EMC Directive 2004/108/EC as indicated in European Standard EN 55022 Class
B and the Low Voltage Directive 2006/95/EC as indicated in European Standard EN 60950.
General Information to all Users: This equipment generates, uses and can radiate radio
frequency energy. If not installed and used according to this manual the equipment may cause
interference with radio and television communications. There is, however, no guarantee that
interference will not occur in any particular installation due to site-specific factors.
1) In order to meet emission and immunity requirements, the user must observe the following:
a) Use only the provided I/O cables to connect this digital device with any computer.
b) To ensure compliance, use only the provided manufacturer’s approved line cord.
c) The user is cautioned that changes or modifications to the equipment not expressly
approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
2) If this equipment appears to cause interference with radio or television reception, or any
other device:
a) Verify as an emission source by turning the equipment off and on.
If you determine that this equipment is causing the interference, try to correct the interference
by using one or more of the following measures:
i) Move the digital device away from the affected receiver.
ii) Reposition (turn) the digital device with respect to the affected receiver.
iii) Reorient the affected receiver’s antenna.
iv) Plug the digital device into a different AC outlet so the digital device and the receiver
are on different branch circuits.
v) Disconnect and remove any I/O cables that the digital device does not
use.(Unterminated I/O cables are a potential source of high RF emission levels.)
vi) Plug the digital device into only a grounded outlet receptacle. Do not use AC adapter
plugs. (Removing or cutting the line cord ground may in crease RF emission levels and
may also present a lethal shock hazard to the user.)
If you need additional help, consult your dealer, manufacturer, or an experienced radio or
television technician.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Elo TouchSystems SW601960 User manual

Elo TouchSystems
Brand
Elo TouchSystems
Model
SW601960
Category
Public displays
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents