ONKYO 10345 Owner's manual

Brand: ONKYO

Model: 10345

Category: Docking speakers

Type: Owner's manual

This manual is also suitable for

CD Tuner Audio System

CBX-500

CBX-600UKD

Instruction Manual

Thank you for purchasing an Onkyo CD Tuner Audio System.

Please read this manual thoroughly before making any

connections and plugging it in.

Following the instructions in this manual will enable you to obtain

optimum performance and listening enjoyment from your new CD

Tuner Audio System.

Please retain this manual for future reference.

Getting Started

............................En-2

Connections

.............................. En-14

Basic Operation

....................... En-18

Playing CDs and

USB Flash Drives

.................... En-20

Playing Your iPod

................... En-29

Listening to the Radio

.......... En-33

Clock and Timer

...................... En-45

Miscellaneous

.......................... En-53

En-2

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radia-

tors, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are pro-

vided for your safety. If the provided plug does not

fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience recepta-

cles, and the point where they exit from the appara-

tus.

11. Only use attachments/accessories specified by the

manufacturer.

12.

Use only with the cart, stand,

tripod, bracket, or table spec-

ified by the manufacturer, or

sold with the apparatus.

When a cart is used, use cau-

tion when moving the cart/

apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

15. Damage Requiring Service

Unplug the apparatus from the wall outlet and refer

servicing to qualified service personnel under the

following conditions:

A. When the power-supply cord or plug is damaged,

B. If liquid has been spilled, or objects have fallen

into the apparatus,

C. If the apparatus has been exposed to rain or

water,

D. If the apparatus does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operating

instructions as an improper adjustment of other

controls may result in damage and will often

require extensive work by a qualified technician

to restore the apparatus to its normal operation,

E. If the apparatus has been dropped or damaged in

any way, and

F. When the apparatus exhibits a distinct change in

performance this indicates a need for service.

16. Object and Liquid Entry

Never push objects of any kind into the apparatus

through openings as they may touch dangerous volt-

age points or short-out parts that could result in a

fire or electric shock.

The apparatus shall not be exposed to dripping or

splashing and no objects filled with liquids, such as

vases shall be placed on the apparatus.

Don’t put candles or other burning objects on top of

this unit.

17. Batteries

Always consider the environmental issues and fol-

low local regulations when disposing of batteries.

18. If you install the apparatus in a built-in installation,

such as a bookcase or rack, ensure that there is ade-

quate ventilation.

Leave 20 cm (8") of free space at the top and sides

and 10 cm (4") at the rear. The rear edge of the shelf

or board above the apparatus shall be set 10 cm (4")

away from the rear panel or wall, creating a flue-

like gap for warm air to escape.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPARATUS

TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

AVIS

PORTABLE CART WARNING

S3125A

En-3

Precautions

1. Recording Copyright—Unless it’s for personal use

only, recording copyrighted material is illegal with-

out the permission of the copyright holder.

2. AC Fuse—The AC fuse inside the unit is not user-

serviceable. If you cannot turn on the unit, contact

your Onkyo dealer.

3. Care—Occasionally you should dust the unit all

over with a soft cloth. For stubborn stains, use a soft

cloth dampened with a weak solution of mild deter-

gent and water. Dry the unit immediately afterwards

with a clean cloth. Don’t use abrasive cloths, thin-

ners, alcohol, or other chemical solvents, because

they may damage the finish or remove the panel let-

tering.

4. Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE

FIRST TIME, READ THE FOLLOWING SEC-

TION CAREFULLY.

AC outlet voltages vary from country to country.

Make sure that the voltage in your area meets the

voltage requirements printed on the unit’s rear panel

(e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).

The power cord plug is used to disconnect this unit

from the AC power source. Make sure that the plug

is readily operable (easily accessible) at all times.

Pressing the [ON/STANDBY] button to select

Standby mode does not fully shutdown the unit. If

you do not intend to use the unit for an extended

period, remove the power cord from the AC outlet.

5. Preventing Hearing Loss

Caution

Excessive sound pressure from earphones and head-

phones can cause hearing loss.

6. Batteries and Heat Exposure

Warning

Batteries (battery pack or batteries installed) shall

not be exposed to excessive heat as sunshine, fire or

the like.

7. Never Touch this Unit with Wet Hands—Never

handle this unit or its power cord while your hands

are wet or damp. If water or any other liquid gets

inside this unit, have it checked by your Onkyo

dealer.

8. Handling Notes

• If you need to transport this unit, use the original

packaging to pack it how it was when you origi-

nally bought it.

• Do not leave rubber or plastic items on this unit

for a long time, because they may leave marks on

the case.

• This unit’s top and rear panels may get warm

after prolonged use. This is normal.

• If you do not use this unit for a long time, it may

not work properly the next time you turn it on, so

be sure to use it occasionally.

• When you’ve finished using this unit, remove all

discs and turn off the power.

9. Installing this Unit

• Install this unit in a well-ventilated location.

• Ensure that there’s adequate ventilation all

around this unit, especially if it’s installed in an

audio rack. If the ventilation is inadequate, the

unit may overheat, leading to malfunction.

• Do not expose this unit to direct sunlight or heat

sources, because its internal temperature may

rise, shortening the life of the optical pickup.

• Avoid damp and dusty places, and places subject

to vibrations from loudspeakers. Never put the

unit on top of, or directly above a loudspeaker.

• Install this unit horizontally. Never use it on its

side or on a sloping surface, because it may cause

a malfunction.

• If you install this unit near a TV, radio, or VCR,

the picture and sound quality may be affected. If

this occurs, move this unit away from the TV,

radio, or VCR.

10. Moisture Condensation

Moisture condensation may damage this unit.

Read the following carefully:

Moisture may condense on the lens of the optical

pickup, one of the most important parts inside this

unit.

• Moisture condensation can occur in the following

situations:

– The unit is moved from a cold place to a warm

place.

– A heater is turned on, or cold air from an air

conditioner is hitting the

unit.

– In the summer, when this unit is moved from an

air conditioned room to a hot and humid place.

– The unit is used in a humid place.

• Do not use this unit when there’s the possibility of

moisture condensation occurring. Doing so may

damage your discs and certain parts inside this unit.

If condensation does occur, remove all discs and

leave this unit turned on for two to three hours. By

this time, the unit will have warmed up and any con-

densation will have evaporated.

This unit contains a semiconductor laser system and is

classified as a “CLASS 1 LASER PRODUCT”. So, to

use this model properly, read this Instruction Manual

carefully. In case of any trouble, please contact the store

where you purchased the unit.

To prevent being exposed to the laser beam, do not try

to open the enclosure.

CAUTION:

CLASS 1M VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN. DO NOT VIEW

DIRECTLY WITH OPTICAL INSTRUMENTS.

THIS PRODUCT UTILIZES A LASER. USE OF

CONTROLS OR ADJUSTMENTS OR PERFOR-

MANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARD-

OUS RADIATION EXPOSURE.

En-4

Precautions—Continued

The label on the right is

applied on the rear panel.

1. This unit is a CLASS 1

LASER PRODUCT and

employs a laser inside the cabinet.

2. To prevent the laser from being exposed, do not remove the

cover. Refer servicing to qualified personnel.

For U.S. models

FCC Information for User

CAUTION:

The user changes or modifications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interfer-

ence in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accor-

dance with the instructions, may cause harmful interfer-

ence to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful inter-

ference to radio or television reception, which can be

determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit dif-

ferent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV tech-

nician for help.

For Canadian Models

NOTE: THIS CLASS B DIGITAL APPARATUS

COMPLIES WITH CANADIAN ICES-003.

Modèle pour les Canadien

REMARQUE: CET APPAREIL NUMÉRIQUE DE

LA CLASSE B EST CONFORME À LA NORME

NMB-003 DU CANADA.

For British models

Replacement and mounting of an AC plug on the power

supply cord of this unit should be performed only by

qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance

with the following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured mark-

ings identifying the terminals in your plug, proceed as

follows:

The wire which is coloured blue must be connected to

the terminal which is marked with the letter N or

coloured black.

The wire which is coloured brown must be connected to

the terminal which is marked with the letter L or

coloured red.

IMPORTANT

The plug is fitted with an appropriate fuse. If the fuse

needs to be replaced, the replacement fuse must

approved by ASTA or BSI to BS1362 and have the

same ampere rating as that indicated on the plug. Check

for the ASTA mark or the BSI mark on the body of the

fuse.

If the power cord’s plug is not suitable for your socket

outlets, cut it off and fit a suitable plug. Fit a suitable

fuse in the plug.

For European Models

Declaration of Conformity

We,

ONKYO EUROPE

ELECTRONICS GmbH

LIEGNITZERSTRASSE 6,

82194 GROEBENZELL,

GERMANY

GROEBENZELL, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

K. MIYAGI

declare in own responsibility, that the ONKYO product

described in this instruction manual is in compliance with the

corresponding technical standards such as EN60065,

EN55013, EN55020 and EN61000-3-2, -3-3.

En-5

Supplied Accessories

Make sure you have the following accessories:

Note:

• In catalogs and on packaging, the letter at the end of

the product name indicates the color. Specifications

and operations are the same regardless of color.

Features

General

• CD tuner audio system with built-in iPod

dock

• Built-in stereo hi-fi speakers

• Control your iPod with the remote controller

• Super Bass (S.Bass) function for deeper bass sounds

• Bass and treble tone controls

• Line input for external audio source

• Headphones jack

• Dimmable display

Speakers

• OMF diaphragm

• Aero Acoustic Drive for powerful and natural sound

iPod

• iPod direct digital connection

• Made for iPod touch (1st and 2nd generation), iPod

classic, and iPod nano (2nd, 3rd, 4th, and 5th genera-

tion)

Radio

• FM/AM tuner (no AM on CBX-600UKD)

• DAB tuner (CBX-600UKD only)

• 40 FM/AM presets (CBX-500), 30 DAB/30 FM pre-

sets (CBX-600UKD)

• Preset naming (FM and AM only)

• RDS (Radio Data System) (CBX-500 European

model and CBX-600UKD only)

• FM Auto Preset function

CD Player

• Play audio CDs, MP3/WMA

CDs (CD-R and

CD–RW)

• 4 playback modes: normal, random, memory, and

1-folder

• 2-mode repeat function (current track or all tracks)

• 25-track playlist

USB Flash Drive

(CBX-500 European model only)

• MP3/WMA playback from USB flash drives

Timers and Clock

• 4 programmable timers

• Sleep timer

• Snooze function

• AccuClock automatic clock setting (CBX-500 Euro-

pean model and CBX-600UKD only)

*1 iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the

developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

*2 Windows Media is a registered trademark or trademark of Microsoft Corporation in the United States and/or in other countries.

Remote controller and two batteries (R03/AAA)

Indoor FM antenna (CBX-500 only)

AM loop antenna (CBX-500 only)

DAB/FM antenna (CBX-600UKD only)

Power cord

(Connector type varies from country to country.)

En-6

Contents

Important Safety Instructions ........................... 2

Precautions......................................................... 3

Supplied Accessories........................................ 5

Features .............................................................. 5

Getting to Know the CBX-500/CBX-600UKD.... 7

Top and Front Panels.................................................7

Display.......................................................................8

Rear Panel..................................................................9

Remote Controller ...................................................10

Disc Notes......................................................... 12

Connecting Antennas...................................... 14

Connecting a Portable Audio Device ............. 16

Connecting the Power Cord............................ 17

AccuClock—Automatic Clock Setting (CBX-500

European model and CBX-600UKD) ...................17

Basic Operation................................................ 18

Turning On the CBX-500/CBX-600UKD...............18

Adjusting the Volume..............................................18

Selecting the Input Source.......................................18

Using Headphones...................................................18

Muting the CBX-500/CBX-600UKD......................19

Adjusting the Bass and Treble.................................19

Using Super Bass.....................................................19

Changing the Display Brightness ............................19

Playing CDs and USB Flash Drives* .............. 20

Using the Top Panel Buttons ...................................20

Using the Remote Controller...................................22

Displaying CD Information.....................................23

Selecting MP3/WMA Files .....................................24

Playing the MP3/WMA Files in Only One Folder..25

Displaying MP3/WMA Information .......................25

Memory Playback....................................................26

Random Playback....................................................27

Repeat Playback ......................................................27

Setting MP3/WMA Preferences ..............................28

Playing Your iPod ............................................ 29

Installing the iPod Dock Adapters...........................29

Using the Top Panel Buttons ...................................29

Using the Remote Controller...................................30

Navigating the iPod Menus with the Remote

Controller ..............................................................31

Displaying Music File Information .........................31

iPod Preferences ......................................................32

Listening to the Radio...................................... 33

Tuning into FM/AM Radio Stations ....................... 33

Listening to DAB Digital Radio (CBX-600UKD

only)...................................................................... 34

Presetting FM Stations Automatically

(Auto Preset)......................................................... 37

Presetting FM/AM/DAB Stations Manually .......... 38

Selecting Preset Stations ......................................... 40

Receiving RDS (CBX-500 European model and

CBX-600UKD)..................................................... 41

Naming Presets (FM/AM only) .............................. 42

Copying Presets (FM/AM only) ............................. 43

Erasing a Preset’s Name (FM/AM only) ................ 44

Erasing Presets (FM/AM only)............................... 44

Displaying FM/AM Radio Information.................. 44

Setting the Clock .............................................. 45

Setting the Clock..................................................... 45

AccuClock with a Specific Station (CBX-500

European model and CBX-600UKD) .................. 46

Using the Timers .............................................. 47

About the Timers .................................................... 47

Programming the Timers ........................................ 48

Turning Timers On and Off .................................... 50

Checking Timer Settings......................................... 50

Using the Snooze Function ..................................... 51

Using the Sleep Timer ............................................ 52

Troubleshooting ............................................... 53

Specifications ...................................................57

En-7

Getting to Know the CBX-500/CBX-600UKD

The page numbers in parentheses show where you can find the main explanation for each item.

a  ON/STANDBY button (18, 49, 53)

b CD slot/door (20)

c INPUT button (18)

d iPod Play/Pause [/] button (29)

e Previous and Next [/]/[/]

buttons (21, 29, 40)

f Stop [] button (20)

g CD Play/Pause [/] button (20)

h CBX-500 European model:

USB Play/Pause [/] button (20)

CBX-500 North American and CBX-600UKD

models:

DISPLAY button (23, 25, 30, 35, 44)

i SNOOZE (51)

j VOLUME []/[] buttons (18)

k iPod Dock (29)

l STANDBY indicator (17, 18)

m Display

n Remote control sensor (11)

o USB port (CBX-500 European model only)

(20)

Top and Front Panels

SNOOZE

INPUT

USB

iPod

SNOOZE

INPUT

USB

iPod

lkm

3 4 6 7 85

Top Panel

Front Panel

CBX-500 European model shown here

En-8

Getting to Know the CBX-500/CBX-600UKD—Continued

a SLEEP indicator

b USB indicator

(CBX-500 European model only)

c MP3 indicator

d WMA indicator

e FOLDER indicator

f DAB indicator (CBX-600UKD only)

g S.BASS indicator

h MUTING indicator

i Playback mode indicators

j Play and Pause   indicators

k TIMER indicators

l Tuning indicators

m RDS indicator (CBX-500 European model

and CBX-600UKD only)

n FILE indicator

o TRACK indicator

p TITLE, ARTIST, and ALBUM indicators

q DISC, TOTAL, and REMAIN indicators

r CH indicator

s Message area

Display

156432879

j skl n

mo p q r

En-9

Getting to Know the CBX-500/CBX-600UKD—Continued

The page numbers in parentheses show where you can find the main explanation for each item.

a PHONES jack (18)

b LINE IN jack (16)

c AM ANTENNA jack (14)

d FM ANTENNA jack (14, 15)

e AC INLET (17)

f DAB/FM ANTENNA jack (15)

Rear Panel

21 3 4 5

6 521

• CBX-500

• CBX-600UKD

See pages 14–17 for connection information.

En-10

Getting to Know the CBX-500/CBX-600UKD—Continued

The page numbers in parentheses show where you can

find the main explanation for each item.

a ON/STANDBY [I/] button (18)

b SLEEP button (52)

c TIMER button (45, 46, 48, 50)

d DISPLAY button (23, 25, 30, 35, 44, 42, 45)

e TREBLE buttons (19)

f BASS buttons (19)

g Fast Reverse []/[TUNING],

Stop [], Play/Pause [/], and

Fast Forward []/[TUNING] buttons

(20, 22, 30, 33)

h MENU button

(26, 28, 31, 34, 36, 37, 38, 42, 43, 44)

i Previous/Next []/[] and

Up/Down []/[] buttons (22, 24, 30, 40)

j ENTER button

k SHUFFLE button (27, 30)

l REPEAT button (27, 30)

m MODE button (24, 25, 26, 46)

n SNOOZE button (51)

o DIMMER button (19)

p INPUT SELECTOR buttons

(USB button: CBX-500 European model only.)

q MUTING button (19)

r VOLUME []/[] buttons (18, 22)

s S.BASS button (19)

t PLAYLIST/FOLDER []/[] buttons

(24, 24, 30, 42)

Remote Controller

See page 30 for details on using the remote controller to control your iPod.

En-11

Getting to Know the CBX-500/CBX-600UKD—Continued

Installing the Batteries

Notes:

• If the remote controller doesn’t work reliably, try

replacing the batteries.

• Don’t mix new and old batteries or different types of

batteries.

• If you intend not to use the remote controller for a long

time, remove the batteries to prevent damage from

leakage or corrosion.

• Expired batteries should be removed as soon as possi-

ble to prevent damage from leakage or corrosion.

Aiming the Remote Controller

When using the remote controller, point it toward the

CBX-500/CBX-600UKD’s remote control sensor, as

shown below.

30°

(

)

Remote control

sensor

CBX-500/

CBX-600UKD

En-12

Disc Notes

Precautions for Playback

Compact discs (CDs) with the following logo on the

label surface can be used.

Do not use discs designed for purposes other than audio,

such as CD-ROMs for PC use. Abnormal noise could

damage the CBX-500/CBX-600UKD.

* The CBX-500/CBX-600UKD supports CD-R and CD-RW

discs.

Note that some discs may not playback because of the disc

characteristics, scratches, contamination or the recording state.

A disc recorded with an audio CD record will not playback

unless it is finalized.

Never use discs which have a special shape (such as

hearts or octagons). These types of discs could jam and

damage the CBX-500/CBX-600UKD.

CD Playback with Copy-control Function

Some audio CDs with copy-control function do not com-

ply with official CD standards. These are special discs

and cannot be played with the CBX-500/CBX-600UKD.

Playback of MP3 and WMA Discs

MP3 and WMA files recorded on a CD-R/CD-RW can

be played with the CBX-500/CBX-600UKD.

• Use discs which have been recorded following the

ISO9660 Level 2 file system. (The supported directory

depth is eight levels, the same as ISO9660 Level 1)

• Discs recorded with the hierarchical file system (HFS)

cannot be played.

• Up to 99 folders (including the root folder), and up to

499 folders (including root) and files can be recog-

nized and played.

Notes:

• A disc recorded with a recorder or personal computer

may not play in some cases. (Cause: Disc’s character-

istics, damaged or dirty disc, dirt on player’s lens, dew

condensation, etc.)

• A disc recorded on a personal computer may not play

because of the application settings or environment.

Record the disc with the proper format. (Contact the

application maker for details.)

• A disc with insufficient storage capacity may not play-

back properly.

Playback of MP3 Discs

• Only MP3 files with the extension “.MP3” or “. mp3”

are supported.

• This CBX-500/CBX-600UKD supports files recorded

in MPEG 1 Audio Layer 3 (32-320kbps), with the

sampling rate of 32/44.1/48kHz.

• Variable bitrates (VBR) between 32kbps and 320kbps

are supported. The time information during VBR

playback may not display correctly.

Playback of WMA Discs

• WMA stands for “Windows Media

Audio”, an audio

compression technology developed by Microsoft Cor-

poration USA.

• Only WMA files with the extension “.WMA” or

“.wma” are supported.

• Encode the WMA file with an application approved by

Microsoft Corporation USA. The file may not play-

back correct if encoded with an unapproved applica-

tion.

• Variable bitrates (VBR) between 64kbps and 160kbps

(32/44.1/48kHz) are supported. The time information

during VBR playback may not display correctly.

• Copyright-protected WMA files cannot be played

back.

• WMA Pro, Lossless and Voice are not supported.

* Windows Media is a registered trademark or trademark of

Microsoft Corporation in the United States and/or in other

countries.

Handling Discs

Hold discs by the edge, or by the center hold and edge.

Avoid touching the playback surface (surface with noth-

ing printed on it).

Do not attach paper or stickers, or write on the playback

or label surface of the disc. Take care not to scratch or

damage the disc.

Label surface

(printed surface)

Playback surface

En-13

Disc Notes—Continued

Precautions for Rental Discs

Do not use discs with residue from cellophane tape,

rental discs with labels which are peeling off, or discs

with decorative labels. This type of disc could get stuck

in the CBX-500/CBX-600UKD, or could damage the

CBX-500/CBX-600UKD.

Precautions for Inkjet Printable Discs

Do not leave a CD-R/CR-RW having a label printed with

an inkjet printer in the CBX-500/CBX-600UKD for a

long time. The disc could get stuck in the CBX-500/

CBX-600UKD, or could damage the CBX-500/

CBX-600UKD.

Remove the disc from the CBX-500/CBX-600UKD

when not being played, and store it in a case. A freshly

printed disc will stick easily, and should not be played

immediately.

Caring for Discs

If the disc is dirty, the CBX-500/CBX-600UKD will

have a hard time reading signals, and the audio quality

may drop. If the disc is dirty, gently wipe off fingerprints

and dust with a soft cloth. Lightly wipe from the center

outwards.

To remove stubborn dust or dirt,

wipe the disc with a soft cloth

dampened with water, and then

dry it with a dry cloth. Do not

use cleaning spray for analog

records or antistatic agents, etc.

Never use volatile chemicals

such as benzine or paint thinner

as they can impregnate the disc

surface.

En-14

Connecting Antennas

Below is the FM/AM antenna connection information

for the CBX-500. For the CBX-600UKD, see “Connect-

ing the DAB/FM Antenna (CBX-600UKD only)” on

page 15.

This section explains how to connect the supplied indoor

FM antenna and AM loop antenna, and how to connect

commercially available outdoor FM antenna.

The CBX-500 won’t pick up any radio signals without

an antenna connected, so you must connect the antenna

to use the tuner.

Connecting the Indoor FM Antenna

(CBX-500 only)

The supplied indoor FM antenna is for indoor use only.

Attach the FM antenna, as shown.

■ North American Model

■ European Model

Once the CBX-500 is ready for use, you’ll need to

tune into an FM radio station and adjust the posi-

tion of the FM antenna to achieve the best possible

reception.

Use thumbtacks or something similar to fix

the FM antenna into position.

Caution: Be careful that you don’t injure yourself

when using thumbtacks.

If you cannot achieve good reception with the supplied

indoor FM antenna, try a commercially available out-

door FM antenna instead (see “Connecting an Outdoor

FM Antenna (CBX-500 only)” on page 15).

Connecting the AM Loop Antenna

(CBX-500 only)

The supplied indoor AM loop antenna is for indoor use

only.

Assemble the AM loop antenna, inserting

the tabs into the base, as shown.

Plug the AM loop antenna into the AM

antenna jack, as shown.

■ Adjusting the AM Loop Antenna

Adjust the location and posi-

tion of the AM antenna while

listening to an AM station to

achieve the best possible

reception.

FM antenna jack

AM antenna jack

Insert the plug fully

into the jack.

Insert the plug fully

into the jack.

Thumbtacks, etc.

En-15

Connecting Antennas—Continued

Connecting an Outdoor FM Antenna

(CBX-500 only)

If you cannot achieve good reception with the supplied

indoor FM antenna, try a commercially available out-

door FM antenna instead.

Notes:

• Outdoor FM antennas work best outside, but usable

results can sometimes be obtained when installed in an

attic or loft.

• For best results, install the outdoor FM antenna well

away from tall buildings, preferably with a clear line

of sight to your local FM transmitter.

• Outdoor antenna should be located away from possi-

ble noise sources, such as neon signs, busy roads, etc.

• For safety reasons, outdoor antenna should be situated

well away from power lines and other high-voltage

equipment.

• Outdoor antenna must be grounded in accordance

with local regulations to prevent electrical shock haz-

ards.

■ Using a TV/FM Antenna Splitter

It’s best not to use the same antenna for both FM and TV

reception, as this can cause interference problems. If cir-

cumstances demand it, use a TV/FM antenna splitter, as

shown.

Connecting the DAB/FM Antenna

(CBX-600UKD only)

The supplied DAB/FM antenna is for indoor use only.

Plug the DAB/FM antenna into the DAB/FM

ANTENNA jack, as shown.

Use thumbtacks or something similar to fix

the DAB/FM antenna into position.

Adjust the location and position of the DAB/FM

antenna while listening to a DAB/FM station to

achieve the best possible reception.

The adapter is not supplied with the CBX-500.

You’ll need to purchase an adapter compati-

ble with the CBX-500’s FM antenna jack.

To CBX-500 To TV (or VCR)

TV/FM antenna splitter

DAB/FM ANTENA jack

Thumbtacks, etc.

En-16

Connecting a Portable Audio Device

The following diagram shows how to connect a portable audio device (e.g., MP3 player or MD player).

Connect the CBX-500/CBX-600UKD’s LINE IN jack on the rear panel to the portable audio device’s output jack.

Depending on the type of output jack on the portable audio device, you may need to purchase a suitable cable. The

CBX-500/CBX-600UKD’s LINE IN jack accepts a stereo miniplug.

Notes:

• Use a connecting cable that doesn’t have any attenuation resistors in it.

• If you connect a portable audio device’s headphone output to the CBX-500/CBX-600UKD’s LINE IN jack, turn down

the volume on the portable audio device before you connect it.

• If the CBX-500/CBX-600UKD seems quiet even with the volume turned up, try increasing the volume on the portable

audio device.

CBX-500/CBX-600UKD

Stereo miniplug

cable

: Signal flow

Portable audio device’s

output jack

En-17

Connecting the Power Cord

Notes:

• Before connecting the power cord, complete and double-check all other connections.

• Turning on the CBX-500/CBX-600UKD may cause a momentary power surge that might interfere with other elec-

trical equipment on the same circuit. If this is a problem, plug the CBX-500/CBX-600UKD into a different branch

circuit.

• Do not use a power cord other than the one supplied with the CBX-500/CBX-600UKD. The supplied power cord is

designed exclusively for use with the CBX-500/CBX-600UKD and should not be used with any other equipment.

• Never disconnect the power cord from the CBX-500/CBX-600UKD while the other end is still plugged into a wall

outlet. Doing so may cause an electric shock. Always disconnect the power cord from the wall outlet first, and then

the CBX-500/CBX-600UKD.

Connect the supplied power cord to the CBX-500/CBX-600UKD’s AC INLET.

Plug the power cord into a suitable wall outlet.

The STANDBY indicator lights up.

For the AccuClock function to work properly, the unit must be able to receive RDS radio stations, which means an FM

antenna must be connected. Be sure to connect an FM antenna before plugging in the power cord (see page 14).

The very first time you plug the power cord into a wall outlet, the AccuClock function automatically searches for an

RDS radio station that’s broadcasting CT (Clock Time) information and sets the clock accordingly. While the CT infor-

mation is being received, “AccuClock…” appears dimly on the display, as shown. Note that it may take several minutes

to set the clock.

If the clock is set successfully, the day and time will be displayed brightly for 2 seconds, as shown.

The AccuClock function automatically updates the clock daily at 2, 3 , and 14.

If for some reason the clock cannot be set automatically, see “Setting the Clock” on page 45.

AccuClock—Automatic Clock Setting (CBX-500 European model and

CBX-600UKD)

To wall outlet

Supplied power cord

(Connector type varies from country to country.)

En-18

Basic Operation

To turn on the CBX-500/CBX-600UKD, press the

[ON/STANDBY] button on the CBX-500/

CBX-600UKD or remote controller. The STANDBY

indicator goes off.

Press the [ON/STANDBY] button again to set the

CBX-500/CBX-600UKD to Standby. The STANDBY

indicator lights up.

Press the VOLUME Up [] button to increase the vol-

ume or the VOLUME Down [] button to decrease it.

You can also use the remote controller’s VOLUME []/

[] buttons.

You can select CD, iPod, DAB

, FM, AM, USB

, or

LINE, which can be an external component.

To select the input source, use the remote controller’s

INPUT SELECTOR buttons. On the CBX-500/

CBX-600UKD, press the [INPUT] button repeatedly.

The input sources are selected in the following order.

*1. DAB can be selected only on the CBX-600UKD.

*2. USB can be selected only on the CBX-500 European model.

Turn down the volume, then connect your stereo head-

phones to the PHONES minijack on the rear panel.

You can adjust the volume and mute the sound as nor-

mal.

The speakers output no sound while the headphones are

connected.

ON/STANDBY

INPUT

SELECTOR

VOLUME

 / 

SNOOZE

INPUT

USB

iPod

ON/STANDBY

INPUT VOLUME

STANDBY indicator (front panel)

PHONES (rear panel)

Turning On the CBX-500/

CBX-600UKD

Adjusting the Volume

Selecting the Input Source

Remote controllerCBX-500/CBX-600UKD

Using Headphones

DABiPod

FMLINE

FMiPod

AMLINE

FMiPod

AMUSBLINE

• CBX-500 European model

• CBX-500 North American model

• CBX-600UKD

PHONES jack

En-19

Basic Operation—Continued

To mute the CBX-500/CBX-600UKD,

press the remote controller’s [MUTING]

button.

“Muting” appears on the display for a few

seconds. The MUTING indicator flashes

continuously while the CBX-500/CBX-600UKD is

muted.

To unmute the CBX-500/CBX-600UKD, press the

[MUTING] button again.

Tips:

While the CBX-500/CBX-600UKD is muted:

• Press the VOLUME []/[] buttons on the CBX-500/

CBX-600UKD or pressing the VOLUME []/[]

buttons on the remote controller will unmute the

CBX-500/CBX-600UKD.

• If you turn the CBX-500/CBX-600UKD off, the next

time you turn it on, the CBX-500/CBX-600UKD will

be unmuted.

Use the BASS []/[] and TRE-

BLE []/[] buttons to adjust the

bass and treble, respectively.

The default setting is “0.” You can

adjust the bass and treble from –5 to

+5.

Note:

• If you press no buttons for 8 seconds, the previous dis-

play will appear automatically.

To turn on Super Bass, press the [S.BASS]

button.

Press the [S.BASS] button repeatedly to

select S.Bass 1, S.Bass 2, or S.Bass 3.

To turn off Super Bass, press the [S.BASS]

button repeatedly until “S.Bass Off” appears.

Press the remote controller’s [DIMMER] but-

ton repeatedly to select the following options:

Muting the CBX-500/CBX-600UKD

DIMMER

MUTING

S.BASS

BASS

TREBLE

VOLUME  / 

MUTING indicator only

flashes continuously

Adjusting the Bass and Treble

Using Super Bass

Changing the Display Brightness

S.Bass 3S.Bass Off

S.Bass 1 S.Bass 2

S.BASS indicator

Normal Dim Dimmer

En-20

Playing CDs and USB Flash Drives*

Only the CBX-500 European model supports USB flash drives.

To play a CD, open the CD door and insert

the CD with the label-side facing you.

When the CD is fully loaded, slide the CD door tab

gently to close the CD door.

To play a USB flash drive, insert it in the

USB port.

Notes:

• Be careful not to drop small objects (e.g., paper clips,

pins) into the CD slot.

• The CBX-500/CBX-600UKD can play 8 cm CDs as

they are. Do not insert 8 cm CDs with an adapter.

Tips:

• You can also connect your iPod to the USB port on the

CBX-500 European model by using the USB cable

that came with your iPod. In this case, set the input

source to USB, and use the controls on your iPod or

the procedures explained on pages 29–31 to control

iPod playback. When your iPod is connected via USB,

it will not be charged when the CBX-500 is on

Standby.

• To keep out dust, always close the CD door. To eject a

CD when the CD door is already open, push the CD

door tab toward you. If a CD cannot be ejected using

normal operation, push the CD door tab toward you

for 3 seconds and the CD will be forcibly ejected.

To start playback, press the CD Play/Pause

[/] button, or press the USB Play/Pause

[/] button.

To stop playback:

Press the Stop [

] button.

Playback stops automatically when the last track has

been played.

To pause playback:

Press the CD Play/Pause [/] button or USB Play/

Pause [/] button to pause CD or USB flash drive

playback, respectively. The Pause  indicator appears.

To resume playback, press the CD Play/Pause [/]

button or USB Play/Pause [/] button again.

To eject the CD:

Open the CD door and push the CD door tab toward you.

If the CD door is already open, pushing the CD door tab

toward you will cause the CD to be ejected.

To remove the USB flash drive:

Stop playback, press the Stop [

] button again so that

“Unplug OK” appears on the display, and then remove

the USB flash drive.

Note:

• Removing the USB flash drive during playback may

damage the data stored on it.

Tips:

• The CBX-500/CBX-600UKD will turn on automati-

cally if you open the CD door and eject a CD while it’s

on Standby.

• To eject the CD while the CBX-500/CBX-600UKD is

on Standby, open the CD door, and push the CD door

tab toward you.

Using the Top Panel Buttons

SNOOZE

INPUT

USB

iPod

USB

OPEN/EJECT

Display

CD slot/door

USB port

If you connect your iPod touch

with a USB cable, you can enjoy

movies, YouTube, etc., in

landscape.

Label-side

USB flash drive

Page is loading ...

ONKYO 10345 Owner's manual

Brand: ONKYO

Model: 10345

Category: Docking speakers

Type: Owner's manual

This manual is also suitable for

Download PDF

report

ONKYO 10345 Owner's manual

This manual is also suitable for

ONKYO 10345 Owner's manual

Related papers

Other documents