2. Vehicles & accessories
  3. Motor vehicle accessories & components
  4. Motorcycle Accessories
  5. Rugged Ridge
  6. 15210.69

Rugged Ridge 15210.69, 15210.73, 17235.73 Installation guide

  • I have reviewed the instructions for the Rugged Ridge Rocker Switch Two Position. This document covers the wiring for both +12V output and when used with Rugged Ridge Fog Lights. It contains details about connecting the ground input, +12V input, and +12V output, as well as the relay wiring. I am ready to assist you with any questions you might have.
  • How to wire the switch for +12V output?
    How to wire the switch when used with Rugged Ridge Fog Lights?
Rocker Switch, Two Position, Black with Indicator Light, Rugged Ridge, Universal Application
17235.xx
For Technical Assistance Contact:
OMIX-ADA Tech Support
Phone: 1-800-449-6649
Email: techsuppor[email protected]om
Web: www.Omix-Ada.com
Page 1 of 1
Rev 2/11 SB
1. Wiring for +12v output.
2. Wiring when used with Rugged Ridge Fog Lights.
A. Connect black wire (85) from relay directly
to ground.
B. Cut black wire on relay (86).
C. Connect black wire (86) to (A2) on switch.
/